A.F.W Co., Ltd. Overview
A.F.W is a Korean specialist in solid-state joining of dissimilar metals. It is built on rotary friction welding and, more recently, friction stir welding (FSW), and has added aluminium high-pressure die-casting through a 2023 acquisition. The company describes itself as Korea's first friction-welding specialist. From 2016 to 2019 it grew quickly by supplying copper–aluminium "negative-electrode friction-welded terminals" for lithium-ion battery cap assemblies, largely through Samsung SDI's supply chain, at operating margins above 30%. A design change at its end customer in 2020 caused that revenue to collapse. Revenue fell from KRW 30.3 bn (2018) to KRW 4.4 bn (2022), and the company has made an operating loss every year since 2021. Its turnaround plan has three legs: die-cast aluminium parts (now about three-quarters of sales), FSW-joined xEV electrical housings, and Cu/Al busbars. In 2026 it began delivering parts through LG Innotek and SeAH Mechanics. Mounting losses and the collapse of its share price have left it facing delisting.
What the company does
A.F.W makes metal components joined or formed with three linked process technologies:
-
Rotary (inertia/continuous-drive) friction welding. This is the company's original core. Two parts are joined by spinning one against the other under axial pressure until frictional heat creates a solid-state forged bond, without melting. It works well for dissimilar pairs such as copper–aluminium, which fusion welding struggles to join because brittle intermetallics form. A.F.W designs its own friction-welding equipment and runs it through to mass production (2020 press release).
-
Friction stir welding (FSW). A rotating, non-consumable tool stirs plasticised material along a joint line. A.F.W began buying FSW equipment in 2021 and applies it to EV electrical housings such as inverter cases and junction boxes (2021–2022 press releases). By its March 2025 AGM it had installed medium and large FSW machines plus 5-axis machining centres to build test-car parts (2025 AGM notice).
-
Aluminium die-casting. This was added through the 2023 acquisition of an aluminium die-casting company (FnGuide business summary). The company says that combining die-casting, rough machining, FSW and finish machining in-house gives it better process efficiency than competitors (2025 AGM notice).
The company's own description
In its March 2025 AGM materials, A.F.W said it entered the xEV electrical-component business with FSW technology. It said it had installed medium and large FSW equipment and supporting machining (including 5-axis machines) for test-car development, and that its in-house die-casting, rough machining, FSW and finish machining give it a process-efficiency edge. It also described the domestic metal-processing market as fragmented, with many firms making many product types across industries (2025 AGM notice, paraphrased). Earlier disclosures (Alphasquare company overview, derived from DART) describe the business as producing negative-electrode friction-welded terminals for lithium-ion batteries and friction-welded metal parts. The terminals go into ESS and EV batteries, and the medium/large cells carrying them have been used by BMW, Volkswagen, Audi and Chrysler.
Independent characterisation
A.F.W is a sub-scale, build-to-print Tier-2/Tier-3 metal-parts supplier in transition. It has a real niche capability in dissimilar-metal joining but has never replaced the high-margin battery-terminal revenue it lost in 2020. Its revenue mix moved within two years from a proprietary component (negative terminals: 61.5% of 2022 sales) to commodity-like die-cast parts (75.6% of 2024 sales). That shift lifted revenue but deepened operating losses (operating margin −41% in FY2024 and −69% in FY2025). The business is now mainly a contract manufacturer of aluminium die-cast and machined parts. On top of that it holds an option on FSW-based EV housings and busbars, which began commercial shipments through LG Innotek and SeAH Mechanics in 2026 (Stockplus company profile).
Revenue model and value-chain position
| Dimension | Characterisation |
|---|---|
| Revenue model | Almost entirely product sales (manufactured goods); small "goods" (merchandise) line (4.35% in 2023, 0% in 2024); some contract processing (임가공) historically (11.96% of 2022 sales as "friction-welding processing") |
| Service / subscription / licensing | None disclosed |
| Value-chain position | Tier-2/Tier-3 component maker. Historically sold battery terminals to cap-assembly makers (Shinheung SEC and affiliates), who sold to cell makers (Samsung SDI), who sold to OEMs. Now sells die-cast and FSW parts to Tier-1 module/parts makers (LG Innotek, SeAH Mechanics) |
| Customer types | Battery component makers; automotive Tier-1s; heavy-equipment and drilling-equipment buyers; contract-processing customers (e.g., Seohan Industry for processed parts) |
| End-markets | xEV and ESS batteries; automotive powertrain and driveline (shafts, CV joints, valves, turbochargers); heavy equipment and military trucks; drilling equipment; telecom (5G repeater housings, a government R&D project) |
Named historical customers (per DART-derived summary on Moneypie wiki): the main negative-terminal customers were Shinheung SEC Co., Ltd. (a Samsung SDI Tier-1), Shaanxi Juxin Shinheung Power Battery Technology (China), SHINHEUNG SEC EU KFT (Hungary) and Taehwa Co.; processed parts went to Seohan Industry Co. 2026 channels: LG Innotek and SeAH Mechanics, for BCCM and end plates (Stockplus).
Strategy
Stated strategy (themes paraphrased from company disclosures)
-
From "battery heart" to "EV blood vessel" (2019 IPO). The company aimed to move beyond battery terminals into busbars, which carry power from battery to motor and other loads. It cited its world-first CAF busbar and planned a dedicated line in the new Daegu plant (Asia Economy, May 2019).
-
Restructure around next-generation busbars (2020–2021). Management stated that its flagship product would change but its friction-welding capability would not, and that it would enter EV and hydrogen-vehicle markets with busbars and FSW-based parts (press releases, Aug 2020 and May 2021).
-
FSW-based xEV electrical components (2021–2025). The company installed medium and large FSW machines and 5-axis machining for test-car development, and promotes an integrated die-casting → rough machining → FSW → finish machining route as a cost and efficiency advantage (2025 AGM notice).
-
Diversify into aluminium die-casting (2023 onwards). The company acquired an aluminium die-casting business to expand automotive parts. It pursues busbars for EV battery-system assemblies, FSW-based eco-friendly vehicle electrical parts and die-cast aluminium parts (FnGuide business summary).
-
Tier-1 partnerships (2026). It began delivering BCCM and end plates through LG Innotek and SeAH Mechanics to expand its xEV electrical-component business (Stockplus).
Initiatives in the last 24 months (Oct 2024–Oct 2026)
| Initiative | Timing | Detail | Status |
|---|---|---|---|
| FSW capacity build-out (medium/large FSW, 5-axis) | By Mar 2025 | Equipment for xEV test-car parts | Installed (2025 AGM notice) |
| FSW revenue line established | FY2025 | FSW reported separately (≈5% of FY2025 revenue; ≈9% of Q2 2026) | Ramping |
| LG Innotek channel (BCCM) | 2,026 | FSW-based BCCM deliveries | Started (Stockplus) |
| SeAH Mechanics channel (end plates) | 2,026 | Die-cast end-plate deliveries | Started (Stockplus) |
| Government 5G-housing R&D project | Ended Sep 2024 | Al die-cast + friction-welded large 5G repeater housing | Completed; commercialisation n/d |
| Listing-maintenance measures | 2,026 | No disclosed equity raise, reverse split or buyback was found in response to the market-cap and price thresholds | — |
| ESG / sustainability commitments | — | None disclosed | — |
| Cost programme with targets | — | None disclosed | — |
Medium-term targets and guidance
Not publicly disclosed. The company has not published revenue, margin or capex guidance in the sources reviewed. At IPO (2019), NH Investment & Securities expected the growth story to become visible from 2020 (NH company comment, Sep 2019), but that did not happen.
Products & Services
A.F.W does not publish pricing. Launch years are given only where disclosed.
Battery components (friction welding)
| Product | Description / capabilities | Target customer | Launch / status | Source |
|---|---|---|---|---|
| Negative-electrode friction-welded terminal (음극마찰용접단자) | Cu–Al bimetallic part joining the inner and outer negative side of a Li-ion cell cap assembly so current can flow. Solid-state friction weld (high-speed rotation plus instantaneous frictional heat) gives high-strength joints without fusion defects | Cap-assembly makers (Shinheung SEC and affiliates in Korea, China and Hungary; Taehwa) serving Samsung SDI; end use in BMW, VW, Audi and Chrysler EV batteries and ESS | Mass production since c.2015–16 (n/d); declining since 2020 | Asia Economy 2019; Alphasquare; Moneypie |
| Rivet terminal | Terminal component for batteries | Battery component makers | Listed in product portfolio; launch n/d | Morningstar profile |
| Pouch-type battery cell (patent) | Patented structure for pouch-cell terminals or leads | Cell makers | Patent registered by 2021; commercial status n/d | Press release, 29 Jan 2021 |
| EV battery-module technology (patent) | Patent related to EV battery modules | Module makers | Registered 2021 | Asia Economy, Feb 2022 |
Busbars and electric conductors (friction welding)
| Product | Description / capabilities | Target customer | Launch / status | Source |
|---|---|---|---|---|
| CAF busbar (Cu/Al Friction-welded busbar) | Busbar joining copper and aluminium by friction welding, for power delivery from battery to traction motor and other loads. Lighter and cheaper than all-copper or nickel busbars. Company claimed a world-first development (2019) | EV battery-system (BSA) and power-electronics makers | Development completed 2019; dedicated line planned for 4th plant; volume status n/d | Asia Economy 2019; press release 2021 |
| CCA busbar | Copper-clad aluminium busbar variant; patented | EV makers / Tier-1s | Patented 2019; prototypes 2020–21 | Press releases 2020–21 |
| Fuse busbar (퓨즈용 부스바 / fusing busbar) | Busbar integrated with fuse function | EV power-distribution makers | Patented 2019 | Press release 2020; Morningstar |
| Film-capacitor busbar | Busbar for film capacitors in inverters | Inverter / capacitor makers | Patented by 2021 | Press release, 29 Jan 2021 |
| Power busbars for EVs; conductor sleeves | Electric conductors in current product listing | EV Tier-1s | Current listing | Simply Wall St / Investing.com profile |
xEV electrical housings (FSW and die-casting)
| Product | Description / capabilities | Target customer | Launch / status | Source |
|---|---|---|---|---|
| BCCM (FSW-based, as termed by company) | EV component produced with friction stir welding | LG Innotek (channel) | Deliveries started 2026 | Stockplus |
| End plate (die-cast) | Die-cast aluminium end plate for EV battery or electrical assemblies | SeAH Mechanics / LG Innotek (channels) | Deliveries started 2026 | Stockplus |
| Inverter case | FSW-joined aluminium housing for EV inverters | EV Tier-1s | Joining technology developed 2020–21; commercial status n/d | Press release, 29 Jan 2021 |
| Junction box | FSW-joined EV junction-box housing | EV Tier-1s | Technology developed 2020–21 | Press release, 29 Jan 2021 |
| Large 5G repeater housing | Al die-cast plus friction-welded housing (government R&D project with SJ Tech) | Telecom equipment makers | Project Oct 2020–Sep 2024; commercial status n/d | Moneypie (DART-derived) |
Automotive and industrial friction-welded parts
| Product | Description | Target customer | Source |
|---|---|---|---|
| Propeller shafts | Friction-welded tubular driveline shafts | Auto / commercial-vehicle makers | Simply Wall St; Morningstar |
| Crankshafts | Friction-welded crank components | Engine makers | Same |
| Auto compressor parts | Friction-welded compressor parts | A/C compressor makers | Same |
| Turbocharger parts | Friction-welded turbine-shaft assemblies | Turbo makers | Same |
| C/V joints | Constant-velocity joint components (Delphi project, 1999) | Driveline makers | Same; Saramin |
| Tubular shafts | Friction-welded tubular shafts | Auto / industrial | Simply Wall St |
| Engine valves | Bimetallic friction-welded valves | Engine makers | Simply Wall St; EMIS |
| Brake discs | Brake disc components | Auto / CV makers | Morningstar |
| Back idler gears | Transmission gears | Auto makers | Simply Wall St |
| Axle shafts | Friction-welded axle shafts | Commercial vehicles | Stockplus |
| Shafts for buses, trucks and military trucks | Heavy-duty shafts | CV and defence vehicle makers | Simply Wall St |
| Electromagnetic inductive sensor housings | Friction-welded housings | Sensor makers | EMIS |
| Heavy-equipment and drilling parts: casing sockets, drill rods, yokes | Friction-welded drilling tools and heavy-equipment components | Drilling-equipment and heavy-equipment makers | EMIS; Morningstar |
| Ship engine parts | Friction-welded marine engine components | Marine engine makers | Saramin |
Die-casting (acquired 2023)
| Product family | Description | Status | Source |
|---|---|---|---|
| Aluminium high-pressure die-cast automotive parts | Die-cast parts with in-house rough and finish machining; about 80% domestic and 20% export by FY2025 die-casting revenue | 72–76% of revenue (FY2024–FY2025) | FnGuide; JobKorea |
Process services: contract friction-welding processing (임가공), which made up 11.96% of FY2022 revenue (FnGuide), and the integrated route of die-casting, rough machining, FSW and finish machining (2025 AGM notice).
Financial Narrative
Basis. Figures are standalone (A.F.W does not appear to publish consolidated statements; no subsidiary was identified). Revenue, operating profit and net profit come from DART-derived Alphasquare/Butler data, cross-checked against company press releases (FY2020–FY2021). Currency is KRW bn. Fiscal year runs January–December.
Income statement (FY2021–FY2025)
Sources: FY2021 from company disclosure (Asia Economy, 9 Feb 2022): revenue KRW 7.2 bn, operating loss KRW 2.5 bn, net loss KRW 4.3 bn. FY2022–FY2025 from Alphasquare/DART exact figures: FY2022 revenue KRW 4,437 M, OP −3,992 M, NI −3,369 M; FY2023 KRW 6,822 M, −4,083 M, −3,020 M; FY2024 KRW 15,744 M, −6,476 M, −5,613 M; FY2025 KRW 13,708 M, −9,521 M, −10,260 M. FY2021 growth uses FY2020 revenue of KRW 11.3 bn. EPS is derived as net profit ÷ 20,256,888 shares; Alphasquare reports FY2025 EPS of −KRW 506.5, which matches. No dividend has ever been paid (Simply Wall St).
Five-year revenue CAGR (FY2021→FY2025): +17.5% (derived). This is flattered by the 2023 die-casting acquisition and comes off a very depressed base. From the FY2018 peak (KRW 30.3 bn), FY2025 revenue is 55% lower.
Pre-loss era and current year (context)
Sources: FY2018 from Asia Economy (20 May 2019); FY2019 revenue and OP from Asia Economy (27 Jul 2021); FY2020 from the company press release (29 Jan 2021). FY2019 net profit is derived from the press release's statement that FY2020 net income of KRW 1.6 bn was down 72.0%. FY2018 net profit was not found in reviewed sources.
Source: Alphasquare (DART). H1 2026: revenue KRW 10.72 bn (derived), already 78% of FY2025's full-year revenue; operating loss KRW 4.66 bn; net loss KRW 4.63 bn.
Balance sheet (latest available)
Capital raising history. IPO gross primary proceeds were about KRW 46.4 bn (2,064,000 new shares × KRW 22,500, derived). A June 2024 commentary noted no rights issues or convertible bonds in the prior five years, low leverage and high liquidity (stock-catcher). The unchanged share count of 20,256,888 through October 2026 suggests no equity issuance since IPO (derived). Cumulative net losses for FY2021–H1 2026 total about KRW 31.2 bn (derived), which has absorbed a large part of the IPO capital.
Trend commentary
Revenue. The revenue path falls into three phases. (1) Boom, 2016–2018: about 52.5% CAGR on battery-terminal demand. (2) Collapse, 2019–2022: revenue fell 85% from peak to trough as the end customer redesigned its cells and stopped needing the friction-welded negative terminal (company press releases, 2020–2022). COVID-19 lowered utilisation further in 2020; the Geumsan plant ran at 31.6% utilisation in Q1 2021 against 63.9% a year earlier (Asia Economy, July 2021). (3) Inorganic rebound, 2023–2024: the die-casting acquisition lifted revenue 54% in 2023 and 131% in 2024. FY2025 fell back 12.9%. In H1 2026 quarterly revenue rose for two consecutive quarters (+30% and +51% QoQ), coinciding with the start of LG Innotek / SeAH Mechanics deliveries.
Profitability. Losses have grown even as revenue rose. Operating loss went from KRW 4.1 bn (FY2023) to KRW 6.5 bn (FY2024) and KRW 9.5 bn (FY2025). This shows that the die-casting business, at the current scale and utilisation, is loss-making or at best adds no contribution after fixed costs. Fixed costs from the expanded plant footprint, FSW equipment depreciation and R&D headcount are spread over low volumes. FY2025 net loss (KRW 10.3 bn) exceeded operating loss by KRW 0.7 bn, which points to non-operating charges. The FY2021 press release had flagged one-off costs, and Q4 2025 net loss exceeded operating loss by KRW 0.6 bn. The nature of the FY2025 charges is not disclosed in reviewed sources.
Run-rate. H1 2026 operating loss (KRW 4.66 bn) annualises to about KRW 9.3 bn, roughly flat against FY2025 despite higher revenue. Operating margin improved from −69% (FY2025) to about −43% (H1 2026, derived) as revenue scaled. On H1 2026 cost structure, quarterly revenue of roughly KRW 10–12 bn might be needed to break even (an analyst estimate, not company guidance).
Balance sheet. With equity of about KRW 42 bn against FY2025 net losses of KRW 10.3 bn, the company is not near capital impairment. The debt-to-equity ratio (43%) remains moderate. However, cash and borrowings are not visible in the sources reviewed, so liquidity runway cannot be confirmed.
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansFinancial Detail
Product Lines
| Product line (% of revenue) | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|
Die-casting | — | 21.87 | 75.62 | 72 |
Negative-electrode friction-welded terminals | 61.54 | 44.14 | 12.74 | 7 |
Friction-welded metal parts / processing | 11.96 | 14.12 | 4.43 | — |
Other metal-processed products | 14.83 | 7.55 | 1.23 | — |
FSW products | — | — | — | 5 |
Goods (merchandise) | 6.56 | 4.35 | 0 | — |
Other sales | 5.11 | 7.97 | 5.99 | 16 |
Product line revenue (KRW Bn, derived)
| Product line revenue (KRW Bn, derived) | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|
Die-casting | — | 1.49 | 11.91 | 9.87 |
Negative-electrode friction-welded terminals | 2.73 | 3.01 | 2.01 | 0.96 |
Friction-welded metal parts / processing | 0.53 | 0.96 | 0.70 | — |
Other metal-processed products | 0.66 | 0.52 | 0.19 | — |
FSW products | — | — | — | 0.69 |
Goods (merchandise) | 0.29 | 0.30 | 0 | — |
Other sales | 0.23 | 0.54 | 0.94 | 2.19 |
Total revenue | 4.44 | 6.82 | 15.74 | 13.71 |
Income Statement and Margin Analysis (%)
| Metric | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
Revenue (KRW Bn) | 7.2 | 4.44 | 6.82 | 15.74 | 13.71 |
Revenue growth YoY (%) | -36.3 | -38.1 | 53.7 | 130.8 | -12.9 |
Operating profit (KRW Bn) | -2.5 | -3.99 | -4.08 | -6.48 | -9.52 |
Net profit (KRW Bn) | -4.3 | -3.37 | -3.02 | -5.61 | -10.26 |
Operating margin (%) | -34.7 | -90.0 | -59.8 | -41.1 | -69.5 |
Net margin (%) | -59.7 | -75.9 | -44.3 | -35.7 | -74.8 |
Basic EPS (KRW, derived) | -212 | -166 | -149 | -277 | -507 |
Dividend per share (KRW) | 0 | 0 | 0 | 0 | 0 |
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansIncome Statement and Margin Analysis (%) (FY2018–FY2020)
| Metric | FY2018 | FY2019 | FY2020 |
|---|---|---|---|
Revenue (KRW Bn) | 30.3 | 26.0 | 11.3 |
Operating profit (KRW Bn) | 10.4 | 7.2 | 0.5 |
Operating margin (%) | 33.4 | 27.7 | 4.4 |
Net profit (KRW Bn) | — | 5.7 | 1.6 |
Income Statement
| Quarterly metric (KRW Bn) | Q3 2025 | Q4 2025 | Q1 2026 | Q2 2026 |
|---|---|---|---|---|
Revenue | 3.30 | 3.28 | 4.27 | 6.45 |
Operating profit | -2.48 | -2.60 | -2.02 | -2.63 |
Net profit | -2.42 | -3.21 | -2.02 | -2.61 |
Financial Analysis
| Item | Value | Basis / source |
|---|---|---|
Total assets | KRW 65.99 bn | Alphasquare, latest reported period (likely 30 Jun 2026) |
Liabilities as % of total assets | 35.70% | Alphasquare |
Equity as % of total assets | 64.30% | Alphasquare |
Total liabilities (derived) | ≈KRW 23.6 bn | 65.99 × 35.7% |
Total equity (derived) | ≈KRW 42.4 bn | 65.99 × 64.3% |
Debt-to-equity (liabilities/equity), FY2025 | 43.2% | Alphasquare sector comparison |
Book value per share (derived) | ≈KRW 2,050–2,090 | Equity ÷ shares; consistent with P/B of 0.018 at KRW 37 |
Share capital | KRW 10.12 bn | JobKorea (31 Dec 2025) |
Cash and equivalents | Not publicly disclosed in reviewed sources | — |
Short-term / long-term borrowings | Not publicly disclosed in reviewed sources | — |
Financial Analysis — Operating cash flow
| Item | Status |
|---|---|
Operating cash flow (5 yrs) | Not publicly disclosed in reviewed sources |
Capex (5 yrs) | Not publicly disclosed. Qualitatively high in 2019–2025: 4th (Guji) plant, FSW equipment (2021), medium/large FSW and 5-axis machining (by 2025) |
Dividends paid | Nil (no dividend record) |
Buybacks | None identified |
Financial Analysis — ROE
| Ratio | Value | Basis |
|---|---|---|
ROE (trailing 4 quarters) | -19.7% | Alphasquare sector table |
ROE (latest, alternative) | -23.8% | Butler |
ROA (FY2025, approx.) | ≈-15.5% | Derived: FY2025 NI ÷ latest total assets |
Operating margin FY2025 | -69.5% | Alphasquare (sector table shows -69.455%) |
Net margin FY2025 | -74.8% | Alphasquare (sector table shows -74.849%) |
Debt-to-equity FY2025 | 43.2% | Alphasquare |
Asset turnover FY2025 (approx.) | ≈0.21x | Derived: 13.71 ÷ 65.99 |
Net debt / EBITDA | Not meaningful (EBITDA negative / not disclosed) | — |
Interest coverage | Not meaningful (operating loss) | — |
EBITDA | Not publicly disclosed (D&A not available) | — |
Die-casting revenue split (%)
| Die-casting revenue split (%) | FY2025 |
|---|---|
Domestic (Korea) | 80.2 |
Export | 19.8 |
Geographic Metric Details
| Geographic metric | Status |
|---|---|
Total revenue by region (Americas / EMEA / APAC), 3 years | Not publicly disclosed in reviewed sources |
Share Price History
| Date | Price (KRW) | Market cap (KRW Bn) | Source |
|---|---|---|---|
1 Jul 2019 (IPO offer) | 22,500 | 228.0 | Hantoo small-cap note |
4 Jun 2024 | 1,844 | 37.4 | stock-catcher |
Dec 2025 | 1,420 | 28.8 | Simply Wall St |
24 Jul 2026 | 387 | 7.84 | Google Finance |
9 Sep 2026 | 206 | 4.17 (derived) | Alphasquare |
23 Sep 2026 (first liquidation day) | 106 | 2.15 (derived) | Alphasquare |
2 Oct 2026 (last trade) | 37 | 0.75 (derived) | Alphasquare |
Change by Period
| Period | Change | Basis |
|---|---|---|
Since IPO offer (Jul 2019) | -99.8% | KRW 22,500 → 37 |
~10 months (Dec 2025 → Oct 2026) | -97.4% | KRW 1,420 → 37 |
~28 months (Jun 2024 → Oct 2026) | -98.0% | KRW 1,844 → 37 |
52-week range | KRW 33 – 1,851 | Alphasquare |
Valuation Multiples
| Multiple | At KRW 37 (2 Oct 2026) | At KRW 387 (24 Jul 2026) | Basis |
|---|---|---|---|
P/E | Not meaningful (loss); Alphasquare shows -0.073x trailing | Not meaningful | Alphasquare |
P/B | 0.018x | ≈0.19x (derived) | Alphasquare; derived from equity of about KRW 42 bn |
EV/Sales | Not computable (cash and debt not disclosed) | Not computable | — |
EV/EBITDA | Not meaningful (EBITDA negative / not disclosed) | — | — |
Price / Sales (FY2025) | 0.05x (derived) | 0.57x (derived) | Market cap ÷ FY2025 revenue |
Peer multiples | Electrical-equipment sector averages: P/E 17.66x, P/B 2.58x | — | Alphasquare sector table |
Capital Markets
| Item | Status |
|---|---|
Analyst consensus | None. Coverage ended after 2019 IPO-era notes (SK, NH, IBK, Hana, Eugene); no estimates submitted (Simply Wall St) |
Dividend history and policy | No dividend has ever been paid (Simply Wall St) |
Buyback authorisations | None identified |
Short interest | Zero short balance; minimal short volume (Alphasquare, Sep–Oct 2026) |
Trading flows during liquidation | Retail net buyers and foreign net sellers in late Sep–early Oct 2026; cumulative foreign net selling of about 200,700 shares (Alphasquare) |
Analyst Conclusions
Management guidance and consensus
Management guidance: none publicly disclosed.
Consensus: none; no sell-side coverage.
Bull case
-
Revenue inflection is real. Q2 2026 revenue (KRW 6.45 bn) is nearly double Q4 2025 (KRW 3.28 bn). H1 2026 revenue (KRW 10.72 bn) is already 78% of full-year FY2025, driven by new LG Innotek / SeAH Mechanics programmes. If H2 holds at the Q2 run-rate, FY2026 revenue could approach KRW 23–24 bn (analyst extrapolation, not guidance).
-
Deep asset discount. At the last trade, the company was valued at about 2% of book equity (P/B 0.018), with moderate leverage (liabilities/equity 43%). A reinstatement, a voluntary tender, or a sale of the plants and IP could crystallise value far above KRW 37.
-
Legal tailwind. The court found the market-cap delisting provisions and their accelerated timing invalid as disproportionate. KRX has already deferred further delistings and amended rules to extend relief to non-litigants. If KRX's objection fails, companies frozen mid-liquidation such as A.F.W have an argument for reinstatement.
Bear case
-
Structural losses. Operating losses have widened for four straight years, reaching KRW 9.5 bn in FY2025, with no evidence yet that higher revenue brings operating breakeven. The H1 2026 operating loss still annualises to about KRW 9.3 bn.
-
Double delisting exposure. Even if the market-cap decision is overturned, the separate KRW 1,000 minimum-price rule continues. A.F.W's last price was KRW 37, and KRX says no delisted company has ever been restored through litigation.
-
Strategy credibility. The flagship busbar initiative announced at the 2019 IPO has not produced a disclosed revenue line in six years. The company's revenue now depends on commodity die-casting, a process in which it lacks scale against SeAH Mechanics and global casters.
Catalysts and monitorables (next 12 months)
| Catalyst / monitorable | Why it matters |
|---|---|
| Outcome of KRX objection to the 2 Oct 2026 injunctions and the main lawsuits | Decides whether A.F.W's delisting resumes or is reversed |
| Any KRX decision on the eight already-decided companies | A.F.W's trading status |
| Application of the KRW 1,000 minimum-price rule to A.F.W | Independent delisting route |
| Q3 2026 report (by mid-Nov 2026) and FY2026 audit opinion (Mar 2027) | Revenue trajectory; possible going-concern emphasis |
| Volume ramp at LG Innotek and SeAH Mechanics programmes | Test of the FSW/xEV thesis |
| Any equity raise, reverse split, asset sale or change of control | Survival and liquidity options |
| Disclosure of cash position and borrowings | Liquidity runway |
Analyst verdict
A.F.W is a case study in how quickly a niche component supplier's position can change. In FY2018 it was a high-margin specialist earning a 33% operating margin on copper–aluminium battery terminals. It came to the KOSDAQ market in July 2019 at a valuation of about KRW 228 bn, positioned to grow from battery terminals into EV busbars. Within twelve months, a single design change at its end customer removed most of its core revenue. The six years since have been a series of pivots: busbars that produced no disclosed revenue line, FSW-based EV housings that are only now reaching commercial deliveries, and a 2023 die-casting acquisition that more than doubled revenue while deepening losses.
The operating evidence is mixed. The positive signal is real: H1 2026 revenue rose sharply on new LG-group channels, and FSW products now make up close to a tenth of sales. Against that, the company has lost money at the operating line for five consecutive years, losses grew through FY2025, and no break-even path has been disclosed. Low leverage and book equity of about KRW 42 bn give it some cushion, but cash and debt detail is not visible in the sources reviewed.
The equity question now sits largely outside the business. A.F.W was in the middle of liquidation trading when a court ruling against KRX's accelerated market-cap rule froze the process. It remains suspended, and it faces a second delisting route under the KRW 1,000 minimum-price rule. For investors, the shares are effectively an illiquid legal option on reinstatement rather than an operating investment. For industrial counterparties, the company's dissimilar-metal joining know-how and integrated die-cast/FSW route are useful but sub-scale assets. Conclusion: high-risk, special-situation only; outcome hinges on litigation, not fundamentals, over the next 12 months.
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansExecutive Leadership
Executive Leadership Team
| Name | Title | Tenure | Background | Source |
|---|---|---|---|---|
Kim Myeong-hun (김명훈) | CEO / Representative Director | — | — | 2025 AGM notice; FnGuide; Simply Wall St |
Kim Jun-young (김준영) | Director; Head of Management Planning HQ (경영기획본부장); author responsible for AGM notice | At A.F.W since Jun 2022; nominated inside director at Mar 2025 AGM | Senior researcher, Hyundai Robotics (Sep 2018–Sep 2021) | 2025 AGM notice |
Jin Jeong-a (진정아) | Former CEO / Representative Director | CEO at IPO (2019) through at least May 2021 | — | 2019–2021 press releases |
Kim Ji-hyun (김지현) | Manager, Management Planning HQ (at IPO) | 2,019 | Presented products at the IPO press event | The Fact, Jun 2019 |
Directors' Remuneration
| Item | Status |
|---|---|
Full C-suite (CFO, COO, CTO) | Not publicly disclosed in reviewed sources |
Board size and independence | Not publicly disclosed in reviewed sources. KOSDAQ rules generally require at least 25% outside directors |
Committee structure | Not publicly disclosed. As a sub-KRW 2 trn asset company, an audit committee is not mandatory; a statutory auditor (감사) is typical |
Executive compensation | Not publicly disclosed. Korean rules require individual disclosure only for pay of KRW 500 M or more |
Ownership character | Described in 2024 commentary as a typical family company, with the largest shareholder's family in management (stock-catcher, June 2024) |
Top 10 institutional holders | Not publicly disclosed; institutional ownership negligible |
Foreign ownership | 1.44% of shares (Alphasquare, Oct 2026) |
IPO lock-up | 63% of shares under lock-up at IPO (Hantoo, 2019) |
Board & Management Changes
| Date | Change | Context |
|---|---|---|
Jun 2022 | Kim Jun-young joins as head of Management Planning | Hire from robotics industry during the FSW/xEV pivot |
2021–2025 (n/d) | CEO changes from Jin Jeong-a to Kim Myeong-hun | — |
Mar 2025 | Kim Jun-young nominated as inside director | 2025 AGM |
Competitive Landscape
Competitors by Segment
| Business line | Competitor | Type | Relative positioning vs A.F.W |
|---|---|---|---|
Al die-casting (automotive / electronics) | SeAH Mechanics (KOSDAQ: 396300) | Listed Korean die-caster, founded 1999; high-vacuum, high-pressure die-casting; customers LG Electronics and LG Energy Solution | Larger and better connected; also a channel partner for A.F.W (both partner and competitor) |
Al die-casting (EV battery housings) | Samkee Corp. (Korea) | Listed Korean die-caster | Much larger scale in EV structural castings |
Al die-casting (global) | Nemak (Mexico) | Global leader in lightweight castings | Global scale; not a direct domestic rival |
Al die-casting (global) | Ryobi Ltd. (Japan) | Major die-caster | Global scale |
Battery cap assemblies / terminals | Shinheung SEC (Korea) | Cap-assembly maker for Samsung SDI | Former key customer; vertical integration risk |
Battery cap assemblies / cans | Sangsin EDP (Korea) | Cap assemblies and cans for Li-ion cells | Competes for cell-maker component spend |
Friction welding (parts and machines) | Thompson Friction Welding (UK) | Friction-welding machines and services | Global technology leader |
Friction welding (machines) | Manufacturing Technology Inc. (MTI, US) | Friction-welding machines and services | Global technology leader |
Friction welding (machines) | KUKA (Germany) | Industrial friction-welding systems | Equipment supplier rather than parts competitor |
FSW EV housings / battery trays | Global and Korean battery-tray / housing makers (e.g., Tier-1 casters) | Integrated casting + FSW | A.F.W is sub-scale; its niche is small-batch integrated die-cast + FSW parts |
EV busbars | Copper and laminated-busbar makers (e.g., Amphenol, Rogers, Methode and Korean cable makers) | Busbar suppliers | A.F.W's CAF/CCA busbars have no disclosed commercial volume |
Competitor Detail
| Metric | A.F.W (FY2025) |
|---|---|
Revenue | KRW 13.71 bn |
Revenue growth | -12.9% |
Operating margin | -69.5% |



