Aaron Industries Limited Overview
Aaron Industries is a Surat-based micro-cap manufacturer of elevator cabins, automatic door systems, cabin safety frames and fire-rated landing doors. It sells B2B to India's large population of regional elevator installers and OEMs. Its distinguishing feature is vertical integration into stainless-steel processing: an in-house division polishes, embosses and PVD-colours stainless coil into decorative sheets. Most of that output is consumed internally, and the surplus is sold externally under the STELIX brand to other elevator makers and interior-design users.
In FY2025 the company commissioned an automated Salvagnini S4+P4 panel-bending line at its third plant. This lifted installed capacity to more than 5,000 auto-door systems and 400+ cabins per month, against utilisation of roughly 45–50%. That gives operating leverage without further capex.
The company is moving down the value chain into complete products through EVOQ360, a pit-less smart home lift launched in February 2026. FY2026 revenue was ₹92.0 Cr. Promoters hold about 73%.
What the company does
Aaron Industries designs and manufactures the car (cabin) and door sub-systems of passenger and goods elevators. It sells them to elevator companies, which integrate them with traction machines, guide rails, ropes, controllers and electrical panels sourced elsewhere, then install the lift at site.
Management stated on the Q1FY27 call that all mechanical parts of a lift are now made in-house. Rails, steel wire ropes, electrical cables and electronic control panels are deliberately outside scope "at present". The company says 40–50% of the components that go into an elevator are produced in-house (Q1FY27 call, referencing the investor presentation).
Earlier company descriptions listed traction machines / gearless machines as part of the range. Examples include the Q3FY25 press release (February 2025), the FY2025 presentation, and Morningstar/Simply Wall St profiles. The August 2026 presentation no longer features traction machines as a standalone product, so their current revenue significance is not publicly disclosed.
The two reporting segments
Elevator Division: (FY2026 revenue ₹68.99 Cr; 75.0% of total). Products:
-
Automatic door systems (telescopic, centre-opening)
-
Auto centre-swing doors
-
Manual and swing doors
-
Fire-resistant (fire-rated) doors
-
Elevator cabins in stainless and mild steel, for passenger, commercial, hospital, goods and car lifts
-
Cabin safety frames
-
The EVOQ360 home lift
-
New, from October 2026: fire-rated steel doors for commercial and industrial buildings
Steel Polishing Division: (FY2026 external revenue ₹23.01 Cr; 25.0%). Activities:
-
Matt and mirror polishing
-
Embossing
-
PVD colour coating (gold, rose-gold, black and other finishes)
-
Decorative stainless sheets
-
Press-mould plates
-
Job-work polishing for third parties Most output is transferred internally to the Elevator Division "on a challan basis". These inter-segment transfers are not measured or reported as inter-segment revenue (FY2026 audited results notes). As a result, the division reports a segment loss even though management describes it as profitable on an integrated basis (Q1FY27 call).
Revenue model
| Revenue type | Approx. share | Basis |
|---|---|---|
| Manufactured elevator components (doors, cabins, frames) | Majority of the 75% Elevator segment | FY2026 segment data |
| Complete home-lift kits (EVOQ360) | ~5–7% of Q1FY27 revenue | Management estimate, Q1FY27 call |
| Stainless-steel sheets sold externally (polished/embossed/PVD/designer) | 25% of FY2026 revenue | Segment data. Embossed and designer sheets alone ≈ 10–15% of Q1FY27 sales (management estimate). |
| Job-work services | — | — |
| Services / subscriptions / licensing | Nil | — |
Revenue is almost entirely product sales: manufactured components and, since 2026, complete home-lift kits. Job-work polishing income is small and not separately disclosed. There is no subscription, licensing or recurring service revenue. The company does not install lifts; installation is done by its customers or EVOQ360 territory partners.
Value-chain position
Aaron sits at the tier-1 component / sub-assembly level. The upstream chain runs from stainless-steel mills (raw coil) to Aaron's processing and polishing. Aaron then fabricates the components and sells them to elevator OEMs and installers, which integrate and install for developers and homeowners.
Its integration gives it a processing margin on the sheet it consumes plus a second margin on sheet sold externally (company presentation, August 2026). Pricing behaviour differs by division. Steel-division orders are re-priced with steel market movements. Elevator components carry a fixed price band, and changes are passed on only when input costs move by more than roughly 10–15%, typically within a month (Q1FY27 call).
Customer types and end-markets
Customers: - 750+ customers buying regularly, of which more than 80% are consistent repeat buyers (Q1FY27 call). The August 2026 presentation cites "more than 700".
-
The May 2025 presentation cited "1,500+ customers", "40+ orders daily" and "7,000+ projects completed".
-
Customer types are predominantly small and mid-sized regional elevator companies. National players named as sheet buyers include Techno and Omega. Fujitec (Japanese MNC) places regular sheet orders. KONE/Johnson and Wittur vendor registrations are in process (Q1FY27 call).
End-markets: Residential buildings (dominant), commercial buildings, hospitals, goods lifts and car lifts. Through EVOQ360, the company also serves bungalows and villas of up to G+3 floors, targeting Tier-2 and Tier-3 cities. STELIX sheets also go to interior décor and industrial applications.
Geography: Present in all Indian states per management. The company cites 60+ cities served and exports to 2+ countries (Kenya and Nepal currently; Uganda historically).
Company's own description (paraphrased from the FY2025 presentation and FY2026 press releases)
The company describes itself as a trusted name in the elevator industry. It says it provides a comprehensive range of elevator products, components, the EVOQ360 home lift and stainless-steel polishing services. It emphasises end-to-end cabin and door solutions that blend design and functionality. It explains the stainless-steel polishing facility as a vertical-integration move to secure supply-chain efficiency and in-house quality control.
Independent characterisation
Aaron is best understood as a design-led sheet-metal fabricator riding India's residential elevator boom. It has three strategic assets:
-
A cost and quality edge from captive decorative stainless processing (embossing and PVD are capital-intensive and not common among small competitors).
-
Newly automated door capacity that is only half-utilised.
-
A broad, fragmented customer base of local installers that MNC component makers serve poorly.
Its key weaknesses follow from scale. Revenue was ₹92 Cr in FY2026. Working capital is heavy, with inventory rising to ₹24.4 Cr. Customers are fragmented and price-sensitive. The company also depends on construction-cycle timing. EVOQ360 is an attempt to capture more value per project, but about 40% of its cost is imported Chinese components (Q1FY27 call).
Strategy
Stated strategy (themes from company presentations and AGM, paraphrased)
FY2025 presentation, "Growth Strategy":
-
Strengthen domestic presence: market penetration in high-construction urban centres, long-term contracts with leading elevator companies, and region-specific customisation.
-
Expand export reach: target emerging and developed markets, forge alliances with international distributors, and showcase at global trade fairs.
-
Drive innovation: R&D for energy-efficient, customisable solutions, eco-friendly products, and tracking technology trends.
-
Three cultural "pillars" benchmarked to Indian icons:
-
Trust (Tata)
-
Professional management (L&T)
-
Shareholder wealth creation (Infosys)
-
August 2026 presentation, "Growth Drivers":
-
Marketing (print plus digital)
-
Strategic tie-ups with leading elevator manufacturers as SS-sheet supplier and contract manufacturer
-
Distribution expansion across both divisions
-
Event and exhibition participation
The company frames the core challenge as distribution reach, brand recall and short-term customer relationships.
13th AGM chairman's address (FY2026): Four focus themes:
-
Unit 3 operationalisation
-
EVOQ360 innovation
-
Embossed finish range traction with national elevator makers
-
Wider market presence via exhibitions
Strategic initiatives (last 24 months)
| Initiative | Date | Description | Status / target |
|---|---|---|---|
| Unit 3 / Salvagnini automation | Commissioned Apr 2025 | Fully automatic panel line lifts door capacity to 5,000+/month; reduces manual processes | Utilisation ~45–50%; target 3,500 doors/month "in coming quarters" / 1–2 years |
| ESOP 2024 | Approved Sep 2024 | Employee stock option plan | Grant status not publicly disclosed |
| 1:1 bonus issue | Aug 2025 | Liquidity and shareholder reward | Completed |
| STELIX brand | 2025–26 | Separate brand for external SS sheet sales; trader appointments | Ongoing |
| EVOQ360 home lift | Launched Feb 2026 | Complete pit-less home-lift kit with in-house lithium BMS; exclusive territory partners | 25+ projects; target ~150 units in FY2027; 4–5 exclusive state partners signed |
| EVOQ360 China distributorship | Aug 2026 | All-India distributor for EVOQ360 components of a Chinese manufacturer | Secured. R&D working to reduce the ~40% import content. |
| "Aaron: Be Creative" app | 2,026 | Direct digital channel and visualiser | Live |
| MNC OEM vendor registration | 2025–26 | Samples and vendor registration with KONE/Johnson and Wittur; regular sheet orders from Fujitec | In progress; management hopes for business "next quarter" |
| Railways vendor application | 2025–26 | Applied for railway vendor registration (steel) | No orders yet |
| North India sales push | FY2027 | Senior sales hires for Punjab, Haryana and UP; traders | Costs already in Q1FY27 run-rate |
| Fire-rated steel doors | 15 Oct 2026 | Entry into commercial and industrial fire-door market | Just launched |
| Africa exports | 2024–26 | Exhibitions in Kenya and Tanzania | Stalled by local conditions |
ESG and sustainability commitments
The company states general aims around eco-friendly, energy-efficient products. No quantified emissions targets are publicly disclosed.
Cost programmes
No formal cost programme with targets has been disclosed. Automation (Unit 3) is the de facto productivity programme.
Management guidance and medium-term targets
| Item | Guidance | Source |
|---|---|---|
| FY2027 revenue growth | 25–30% YoY | Q1FY27 call (17 Aug 2026) |
| EBITDA margin | Sustain 18–20%, with an aim to improve | Q1FY27 call; 13th AGM |
| Door output | 3,500 auto-door systems per month over 1–2 years (from ~50% utilisation) | Presentations May 2025 and Aug 2026; Q1FY27 call |
| EVOQ360 volume | ~150 home-lift units by end-FY2027 | Q1FY27 call |
| Order book | ₹10–12 Cr per month run-rate | 13th AGM |
| Capex | No major capex needed for the capacity headroom | Aug 2026 presentation |
| Funding | Internal accruals for now; fund-raise or debt possible if working capital constrains growth | Q1FY27 call; 13th AGM |
Missed guidance: management admitted it did not deliver the ~25% growth expected for FY2026; actual growth was 18.1% (Q1FY27 call).
Products & Services
Elevator Division
| Product | Description / capabilities | Target customer | Launch / latest | Pricing model | Notes |
|---|---|---|---|---|---|
| Automatic Door Systems for Lifts | Synchronised landing and car auto doors (telescopic and centre-opening types); door operators. Production is automated on the Salvagnini S4+P4 line at Unit 3. | Elevator OEMs/installers; residential and commercial projects | Core product since inception; capacity expanded to 5,000+/month in April 2025 | Per-unit B2B price; fixed price band with periodic revisions | Flagship volume product. Utilisation target is 3,500/month within 1–2 years. |
| Auto Centre Swing Door | Smooth centre-swing elevator door system | Residential and premium lifts | Listed in FY2025 and August 2026 presentations | Per unit | — |
| Fire-Resistant (Fire-Rated) Elevator Door | Certified, fire-rated safety elevator doors | High-rise and commercial buildings needing fire compliance | Listed in FY2025 presentation | Per unit | Certification body not publicly disclosed |
| Manual / Swing Doors | Manually operated landing doors | Low-cost and goods lifts | Legacy product (Morningstar profile) | Per unit | — |
| Elevator Cabins | Durable stainless and mild-steel cabins: passenger, commercial, hospital, goods and car lifts. Designer finishes include rose-gold, gold, black PVD and embossed. | Elevator OEMs; premium residential and commercial | Since 2013 (founding product); 400+ cabins/month capacity | Per cabin, design-dependent | "Modern & Luxury Cabin Collections" showcased in app |
| Cabin Safety Frame | Structural frame ensuring cabin integrity and safety | Elevator OEMs | Listed in FY2025 and 2026 presentations | Per unit | — |
| Traction / Gearless Machines | Previously listed as part of the end-to-end range | Elevator OEMs | Mentioned in Feb 2025 press release and FY2025 presentation | — | Not featured in the Aug 2026 presentation; current status not disclosed |
| EVOQ360 Smart Pit-less Home Lift | Complete home-lift component kit for G+3 maximum. Pit-less installation, silent motors, advanced safety sensors, premium customisable finishes. Proprietary lithium battery management system allows ~100 cycles without mains power, developed in-house over ~1 year of R&D. About 40% of cost is imported Chinese components. | Bungalow and villa owners via exclusive territory partners; Tier-2/3 cities | Launched Feb 2026; 25+ projects executed by Aug 2026; target ~150 units in FY2027 | Components ~₹6–6.5 lakh average (range ₹6–9 lakh); installed end-price ~₹8–9.5 lakh vs competitors' ₹10–12 lakh (management) | Margin ~20–25% (management). Exclusive tie-ups with 4–5 state partners. All-India component distributorship secured (Aug 2026). |
| Fire-Rated Steel Doors (commercial/industrial) | Fire-rated steel doors for commercial, industrial and allied buildings | Commercial and industrial developers | Announced 15 Oct 2026 | — | First non-elevator door product; uses existing sheet-metal capacity |
Steel Polishing Division (STELIX brand)
| Product / service | Description | Target customer | Launch | Pricing |
|---|---|---|---|---|
| Matt & Mirror Polishing | Finishes including 2-way mirror polishing | Internal elevator division; external elevator makers | 2019 (Unit 2) | Pass-through of steel price plus processing margin |
| Decorative / Designer SS Sheets | Customised surface designs; digital and screen printing; sand blasting | Elevator makers, interior designers, architects | 2,020 | Steel-linked |
| Embossed Sheets | 3D textured / raised-pattern sheets | National elevator makers (Techno, Omega, Fujitec) | 2,023 | Steel-linked; premium |
| PVD Colour Coating | Gold, rose-gold, black and other colour finishes | Elevator cabins, façades, interiors | 2,022 | Premium |
| Press Plates (Press-Mould Plates) | Large design library in multiple finishes | Industrial users | 2,021 | Steel-linked |
| Job-work polishing | Polishing and finishing of third-party sheets | External clients | Since 2019 | Job-work rates (not disclosed) |
| STELIX (brand) | Branding for externally sold SS sheets, created so elevator customers can resell sheets without Aaron's elevator branding. It is a brand, not a separate plant (Q1FY27 call). | Elevator market and interior-décor segment; traders | 2025–26 (exact date not publicly disclosed) | — |
Certifications: BIS certificate for stainless steel plate, sheet and strip. ISO certificate for design, development and manufacture of elevator cabins and manual and auto door systems (FY2025 presentation).
Digital / service tools
| Tool | Description | Launch |
|---|---|---|
| "Aaron: Be Creative" app | Proprietary visualisation and configuration app for cabins, doors, designer sheets and EVOQ360. Lets elevator dealers show homeowners real-time finishes instead of printed catalogues. Management says it is shortening sales cycles. | 2026 (exact date not publicly disclosed; featured in Aug 2026 presentation) |
In-house equipment base (enabling capabilities)
Salvagnini S4+P4 automatic line, laser cutting, CNC punching and bending, multiple polishing machines, two-way mirror polishing, embossing machine, PVD machine, powder-coating line, digital printing, screen printing, and sand blasting (FY2025 and August 2026 presentations).
Financial Narrative
Standalone, Ind AS, INR Cr unless stated: Sources:
-
FY2022–FY2023: Capital Market/Business Standard results summaries and audited-results newspaper extracts.
-
FY2024–FY2025: Company investor presentation (19 May 2025), with figures converted from lakh.
-
FY2026: Audited results (16 May 2026) and investor presentation (14 August 2026).
Income statement
Notes: 1. Gross profit is from the Stockopedia/Refinitiv-style income statement (₹115m, 169m, 204m, 262m, 336m). FY2026 cost of materials consumed alone was ₹63.71 Cr, so gross-profit definitions differ by inventory-change treatment. Treat gross profit as indicative.
-
EBITDA for FY2022–FY2023 is operating profit before other income (Screener/Capital Market). FY2024–FY2026 EBITDA is company-reported and includes other income: ₹0.14 Cr in FY2024, ₹0.22 Cr in FY2025, ₹0.20 Cr in FY2026.
-
FY2022–FY2023 finance cost is not separately disclosed in the sources reviewed.
-
FY2022–FY2023 tax is derived as PBT − PAT.
-
FY2024 and FY2025 EPS restated are company figures; pre-bonus figures were ₹6.00 and ₹7.86.
-
FY2025 DPS = ₹1.20 pre-bonus (12% final dividend), equal to ₹0.60 adjusted. FY2026 DPS = ₹0.50 (5% final dividend).
Margin profile
Growth rates:
-
Revenue CAGR FY2022–FY2026 (4 years): 25.0%.
-
PAT CAGR over the same period: 16.4%.
-
Revenue CAGR FY2021–FY2026 (5 years, FY2021 revenue ₹24.96 Cr): 29.8%.
Commentary — income statement.
FY2022–FY2023, rapid scaling: Revenue rose ~48–51% per year as the post-COVID housing recovery coincided with the new designer-sheet and PVD offerings.
FY2024, sharp deceleration: Growth slowed to 13%, while EBITDA margin expanded to 17.8% on product mix.
FY2025, record year: Revenue grew 23% and EBITDA margin reached 19.3%. Q4FY25 hit 21.1%, the best quarterly print.
FY2026, the inflection year: Revenue still grew 18%, but PAT fell 17.5%. Three drivers explain the drop:
-
(i) Depreciation more than doubled, from ₹1.81 Cr to ₹3.88 Cr, as ₹32.5 Cr of CWIP (Unit 3 / Salvagnini) was capitalised.
-
(ii) Finance costs nearly doubled, from ₹1.36 Cr to ₹2.59 Cr, as interest on project debt moved from capitalisation to the P&L.
-
(iii) The effective tax rate jumped to 40.5%; Q1FY26 alone was 49%. The cause is not explained in the sources reviewed and was possibly deferred tax.
Q1FY27 recovery: Revenue grew 27% YoY to ₹24.44 Cr, EBITDA margin rose to 20.2%, interest fell 23% and the tax rate normalised to 26%. PAT rose 142% to ₹2.56 Cr.
Management targets 18–20% EBITDA margins and 25–30% revenue growth in FY2027.
Quarterly trajectory (last 5 quarters)
Sources: Company presentation (August 2026) for Q1FY26 and Q1FY27; Equitymaster/Accord consolidated quarterly series for Q2–Q4 EBITDA (gross profit ₹41m, 48m, 51m); audited results for Q3–Q4 PAT.
Discrepancy: The August 2026 presentation shows Q1FY26 EPS as ₹1.01, apparently a pre-bonus figure, whereas restated EPS is ≈₹0.51.
Balance sheet (INR Cr, as at 31 March)
Notes: - Goodwill and intangibles: none disclosed (no acquisitions).
-
FY2026 total borrowings are not disclosed in the summary reviewed. Long-term debt fell by ₹6.23 Cr on repayment. Management noted on the Q1FY27 call that short-term debt has been rising YoY. Total liabilities stood at ₹42.57 Cr.
-
Reserves fell in FY2026 because ₹10.47 Cr was capitalised for the bonus issue.
-
Working capital: inventory plus receivables rose from ₹21.21 Cr (FY2025) to ₹31.43 Cr (FY2026), +48% against revenue +18%. Trade payables are not disclosed in the sources reviewed.
Cash flow (INR Cr)
Notes: - They are indicative only.
-
FY2026 operating, investing and financing cash flows are from the audited cash flow statement as summarised by ScanX. Those figures appeared in a mislabelled "FY25" column but reconcile exactly to the FY2026 net change of −₹11.94 lakh.
-
FY2026 dividends paid is estimated as the FY2025 final dividend of ₹1.20 × 1.047 Cr pre-bonus shares.
-
No buybacks have been disclosed.
Commentary — balance sheet and cash flow.
FY2024–FY2025, capex super-cycle: The company spent roughly ₹40 Cr on Unit 3 and the Salvagnini line, about 1.5× FY2023 total assets. It funded this with borrowings (₹11.4 Cr → ₹31.6 Cr) and an equity issuance. Debt/equity peaked at ~0.88× (FY2024) and fell to 0.74× (FY2025, company-stated).
FY2026: Capex dropped to ~₹1.7 Cr. Operating cash flow of ₹7.7 Cr funded long-term debt repayment and dividends, despite the ₹8.4 Cr inventory build.
Liquidity: Cash is negligible (₹1.15 lakh at year-end). Liquidity relies on bank working-capital lines.
Funding outlook: Management concedes growth beyond ₹100 Cr will need incremental working capital, possibly via fund-raising or debt (Q1FY27 call; 13th AGM).
Ratios
Notes: - FY2022 ROA uses closing assets. FY2022 ROE uses opening equity of ₹12.17 Cr (FY2021, IIFL).
-
The company's own FY2025 ROE figure is 19.16% on a closing-equity basis.
-
Current ratio upper bound = (total assets − PPE − CWIP) ÷ current liabilities. A precise figure is not publicly disclosed.
-
ROIC and the cash conversion cycle cannot be computed precisely because payables are not disclosed in the sources reviewed.
Ratio commentary. Returns have compressed steadily, from ROE of ~30% in FY2023 to ~15% in FY2026. This reflects the denominator effect of the Unit 3 investment, which is half-idle, and the step-up in depreciation and interest.
Inventory days lengthening from ~75 to ~97 is the most important negative trend. Management attributes it to customers deferring pick-up of ready orders amid geopolitical and real-estate slowdowns (13th AGM). It says it is now aligning production to demand to avoid blocking working capital (Q1FY27 call).
If utilisation rises from ~50% toward the 70% target (3,500 of 5,000 doors) on a now-fixed depreciation base, operating leverage should push ROE back toward 20%.
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansFinancial Detail
Segment Overview
| Segment | Contents | Key products / services |
|---|---|---|
Elevator Division | Manufacture and sale of elevator sub-systems and complete home lifts | Auto door systems, auto centre-swing doors, manual/swing doors, fire-resistant doors, elevator cabins, cabin safety frames, EVOQ360 home lift, fire-rated steel doors (from Oct 2026) |
Steel Polishing Division | Stainless-steel coil processing and finishing; external sheet sales under the STELIX brand; job work | Matt and mirror polishing, embossing, PVD colour coating, decorative SS sheets, press plates |
Unallocated | Corporate items | — |
Revenue by Segment
| Segment | FY2024 | FY2025 | FY2026 |
|---|---|---|---|
Elevator Division revenue (INR Cr) | — | 62.00 | 68.99 |
Steel Polishing Division revenue (INR Cr) | — | 15.93 | 23.01 |
Total revenue from operations (INR Cr) | 63.23 | 77.93 | 92.01 |
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansResults by Segment
| Segment | FY2025 | FY2026 |
|---|---|---|
Elevator Division result (INR Cr) | 30.13 | 29.19 |
Steel Polishing Division result (INR Cr) | -15.06 | -14.27 |
Unallocated (INR Cr) | -2.42 | -2.51 |
Total segment result (INR Cr) | 12.65 | 12.40 |
Revenue by Segment (%) and Segment Margins & Growth (%)
| Metric | FY2025 | FY2026 |
|---|---|---|
Elevator share of revenue (%) | 79.6 | 75.0 |
Steel share of revenue (%) | 20.4 | 25.0 |
Elevator segment margin (%) | 48.6 | 42.3 |
Steel segment margin (%) | -94.5 | -62.0 |
Elevator revenue growth YoY (%) | — | 11.3 |
Steel revenue growth YoY (%) | — | 44.5 |
Segment Overview — Elevator Division
| Segment | Assets | Liabilities | Capital employed |
|---|---|---|---|
Elevator Division | 54.17 | 18.72 | 35.45 |
Steel Polishing Division | 34.31 | 7.10 | 27.21 |
Unallocated | 2.70 | 16.74 (balance, incl. borrowings) | — |
Total | 91.18 | 42.57 | 48.61 |
Income Statement and Margin Analysis (%)
| Metric | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|---|
Revenue from operations (INR Cr) | 37.74 | 55.85 | 63.23 | 77.93 | 92.01 |
Revenue growth YoY (%) | 51.2 | 48.0 | 13.2 | 23.3 | 18.1 |
Gross profit (INR Cr, aggregator-derived) | 11.5 | 16.9 | 20.4 | 26.2 | 33.6 |
EBITDA (INR Cr, company basis) | 5.86 | 9.54 | 11.27 | 15.03 | 17.89 |
Depreciation (INR Cr) | 0.85 | 1.15 | 1.42 | 1.81 | 3.88 |
EBIT (INR Cr) | — | — | 9.84 | 13.23 | 14.01 |
Finance cost (INR Cr) | — | — | 1.34 | 1.36 | 2.59 |
Profit before tax (INR Cr) | 4.86 | 7.43 | 8.50 | 11.86 | 11.42 |
Tax (INR Cr) | 1.15 | 2.03 | 2.17 | 3.62 | 4.62 |
Net income / PAT (INR Cr) | 3.71 | 5.40 | 6.33 | 8.24 | 6.80 |
EPS basic, bonus-adjusted (INR) | 1.85 | 2.69 | 3.00 | 3.93 | 3.27 |
EPS diluted, bonus-adjusted (INR) | 1.85 | 2.69 | 3.00 | 3.93 | 3.27 |
Dividend per share, bonus-adjusted (INR) | — | — | — | 0.60 | 0.50 |
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansMargin Analysis (%)
| Metric | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|---|
Gross margin (%) | 30.5 | 30.3 | 32.3 | 33.6 | 36.5 |
EBITDA margin (%) | 15.5 | 17.1 | 17.8 | 19.3 | 19.2 |
EBIT margin (%) | — | — | 15.6 | 17.0 | 15.2 |
PBT margin (%) | 12.9 | 13.3 | 13.4 | 15.2 | 12.4 |
Net margin (%) | 9.8 | 9.7 | 10.0 | 10.6 | 7.4 |
Effective tax rate (%) | 23.7 | 27.3 | 25.5 | 30.5 | 40.5 |
Income Statement and Margin Analysis (%) (Quarterly)
| Metric | Q1FY26 | Q2FY26 | Q3FY26 | Q4FY26 | Q1FY27 |
|---|---|---|---|---|---|
Revenue (INR Cr) | 19.24 | 22.20 | 23.20 | 27.33 | 24.44 |
EBITDA (INR Cr) | 3.70 | 4.10 | 4.80 | 5.10 | 4.99 |
EBITDA margin (%) | 19.0 | 18.5 | 20.8 | 18.6 | 20.2 |
PAT (INR Cr) | 1.06 | 1.40 | 2.02 | 2.32 | 2.56 |
EPS adjusted (INR) | 0.51 | 0.67 | 0.97 | 1.13 | 1.22 |
Balance Sheet
| Metric | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|---|
Total assets (INR Cr) | 29.70 | 38.76 | 74.66 | 82.82 | 91.18 |
Share capital (INR Cr) | 10.04 | 10.04 | 10.47 | 10.47 | 20.95 |
Reserves (INR Cr) | 5.85 | 10.44 | 25.37 | 32.56 | 27.66 |
Total equity (INR Cr) | 15.89 | 20.48 | 35.84 | 43.03 | 48.61 |
Total borrowings (INR Cr) | 9.15 | 11.37 | 31.56 | 31.86 | — |
Long-term borrowings (INR Cr) | — | — | — | 18.08 | 11.85 |
Short-term borrowings (INR Cr) | — | — | — | 13.78 | — |
Cash & equivalents (INR Cr) | — | — | — | 0.13 | 0.01 |
Net debt (INR Cr) | — | — | — | 31.73 | — |
Fixed assets / PPE (INR Cr) | 14.83 | 18.83 | 24.28 | 24.82 | 55.28 |
Capital work-in-progress (INR Cr) | 0.76 | 0.41 | 26.90 | 32.52 | 0.00 |
Inventories (INR Cr) | — | — | — | 15.99 | 24.42 |
Trade receivables (INR Cr) | — | — | — | 5.22 | 7.01 |
Current liabilities (INR Cr) | — | — | — | 19.69 | 25.94 |
Non-current liabilities (INR Cr) | — | — | — | 20.11 | 16.62 |
Goodwill & intangibles (INR Cr) | 0 | 0 | 0 | 0 | 0 |
Cash Flow
| Metric | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|---|
Operating cash flow (INR Cr) | — | — | — | — | 7.67 |
Investing cash flow (INR Cr) | — | — | — | — | -1.72 |
Financing cash flow (INR Cr) | — | — | — | — | -6.07 |
Net change in cash (INR Cr) | 0.01 | 0.01 | 0.04 | 0.04 | -0.12 |
Capex proxy (INR Cr) | 0.95 | 4.55 | 32.84 | 7.46 | 1.72 |
Free cash flow (INR Cr, OCF − capex proxy) | — | — | — | — | 5.95 |
Dividends paid (INR Cr) | — | — | — | — | 1.26 |
Buybacks (INR Cr) | 0 | 0 | 0 | 0 | 0 |
Returns & Leverage Ratios (%) and Financial Ratios (x)
| Metric | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|---|
ROE on average equity (%) | 26.4 | 29.7 | 22.5 | 20.9 | 14.8 |
ROA on average assets (%) | 12.5 | 15.8 | 11.2 | 10.5 | 7.8 |
ROCE, EBIT ÷ (equity + debt), closing (%) | — | — | 14.6 | 17.7 | — |
Debt/equity (x) | 0.58 | 0.56 | 0.88 | 0.74 | — |
Net debt/EBITDA (x) | — | — | — | 2.11 | — |
Interest coverage, EBIT ÷ interest (x) | — | — | 7.3 | 9.7 | 5.4 |
Asset turnover (x) | 1.27 | 1.63 | 1.11 | 0.99 | 1.06 |
Inventory days on revenue | — | — | — | 75 | 97 |
Receivable days on revenue | — | — | — | 24 | 28 |
Current ratio (x, upper-bound estimate) | — | — | — | 1.29 | 1.38 |
Region Overview
| Region | Presence | Momentum |
|---|---|---|
West (Gujarat, Maharashtra, Rajasthan) | Home market. Warehouses/branches in Surat, Ahmedabad and Mumbai; traders in Rajkot, Jodhpur, Nashik and Pune. Many large clients in Gujarat. | Core, mature |
East (West Bengal, Bihar) | Kolkata warehouse/branch (2024); Patna trader | Expanding |
Central (MP, Chhattisgarh) | Indore trader; Raipur recently started, with an EVOQ360 showcase event held there | New growth focus |
South (Telangana, AP, Karnataka) | Tie-up in Hyderabad; traders in Bengaluru and Belgaum (presence described as "very good") | Expanding |
North (Punjab, Haryana, UP) | Senior sales hire to drive these states; traders being appointed | Earliest stage; key expansion focus |
International | Nepal (growing), Kenya/Tanzania (stalled), Uganda (historic) | Small |
Share Price & Returns
| Period | Return | Source / basis |
|---|---|---|
1-year | -29.1% to -37.8% | ScanX (Oct 2026); Anand Rathi (18 Sep 2026) |
3-year | -2.2% | Anand Rathi (Sep 2026) |
5-year | ≈ +270% | Dossier estimate: May 2021 market cap ₹68 Cr ≈ ₹33.9 per bonus-adjusted share vs ≈ ₹126 now |
Since IPO (2018, ₹38 pre-bonus) | Not precisely computable without the full corporate-action history | — |
52-week high / low | ₹258.00 (25 Aug 2025) / ₹106.80 (mid-2026) | Broker data |
Share Price and Market Valuation
| Metric | Aug-2025 | Jan-2026 | Apr-2026 | Jul-2026 | Sep-2026 | Oct-2026 |
|---|---|---|---|---|---|---|
Share price (INR) | 216 | 164 | 140 | 117 | 124 | 126 |
Market cap (INR Cr) | 453 | 344 | 295 | 246 | 261 | 264 |
Valuation Snapshot
| Multiple | Value | Basis |
|---|---|---|
P/E (TTM, Q2FY26–Q1FY27 PAT ₹8.30 Cr; EPS ₹3.96) | ≈ 31.9x | Aggregators: 31.5x (Anand Rathi, Sep 2026); 32.1x |
P/E (FY2026 EPS ₹3.27) | ≈ 38.6x | — |
P/B (FY2026 equity ₹48.61 Cr) | ≈ 5.4x | Aggregators: 5.37x |
EV/EBITDA (TTM EBITDA ≈ ₹19.2 Cr) | ≥ 14.4x | EV floor uses market cap plus long-term debt ₹11.85 Cr only; short-term debt not disclosed |
EV/Sales (TTM revenue ≈ ₹97.2 Cr) | ≥ 2.8x | Same EV floor |
Dividend yield (₹0.50) | ≈ 0.4% | — |
Per-Share Data and Returns & Leverage Ratios (%)
| Metric | FY2025 | FY2026 |
|---|---|---|
Dividend per share, bonus-adjusted (INR) | 0.60 | 0.50 |
Payout ratio (%) | 15.3 | 15.3 |
Capital Markets
| Item | Detail |
|---|---|
Bonus issues | 1:1 (record date 25 Aug 2025) |
Credit ratings (Moody's / S&P / Fitch) | Not rated. Domestic bank-loan ratings (CRISIL / CARE / ICRA / Acuité) are not publicly disclosed in the sources reviewed. |
Debt maturity profile | Not publicly disclosed. Long-term borrowings were ₹11.85 Cr at 31 Mar 2026, down from ₹18.08 Cr. Short-term working-capital debt is rising per management. |
Free float | ~26.9% |
Shareholder count | 11,985 (Jun 2026) |
Index membership | None of note |
Analyst Conclusions
Management guidance (FY2027)
-
Revenue growth of 25–30%, implying ₹115–120 Cr.
-
EBITDA margin of 18–20%.
-
Door output of 3,500 per month in coming quarters.
-
~150 EVOQ360 units.
-
No major capex.
-
Funding from internal accruals, with a fund-raise or debt held as an option.
Consensus
No sell-side consensus exists.
Dossier base-case arithmetic (illustrative, not a forecast):
-
Revenue: ₹115 Cr (+25%).
-
EBITDA: ₹22 Cr at 19%.
-
Depreciation: ~₹4.2 Cr.
-
Interest: ~₹2.2 Cr.
-
PBT: ~₹15.6 Cr.
-
Tax at ~26%: PAT ~₹11.5 Cr, EPS ~₹5.5.
On these assumptions the current price is ~23x forward earnings.
Bull case
-
Operating leverage is real and largely funded. Depreciation is now a fixed ~₹3.9 Cr and utilisation is ~50%. Each incremental ₹10 Cr of revenue at ~20% EBITDA drops roughly ₹2 Cr to PBT. Q1FY27 already showed PBT +67% on revenue +27%.
-
Mix shift to higher-value products. EVOQ360 kits sell at ₹6–9 lakh each with 20–25% margins. Embossed and PVD sheets are being adopted by national OEMs (Techno, Omega, Fujitec). Fire-rated steel doors open new non-elevator demand.
-
MNC OEM validation as a re-rating trigger. A first order from KONE/Johnson or Wittur, or a Fujitec contract-manufacturing deal, would validate quality and could bring institutional investors to a stock with 0% institutional ownership.
Bear case
-
Working capital is eating the growth. Inventory rose 53% in FY2026 while cash fell to near zero. Growth beyond ₹100 Cr likely requires dilution or more debt, which erodes the operating-leverage benefit.
-
Execution and guidance slippage. FY2026 missed the ~25% growth expectation and PAT fell 17.5%. Utilisation has stayed ~50% a year after Unit 3. The real-estate and geopolitical drag could persist.
-
Valuation and quality of disclosure. About 32x TTM P/E and 5.4x book for a ₹92 Cr company with ROE ~15% leave little margin of safety. Segment data are unreliable and the FY2026 tax rate is unexplained. Liquidity is thin, with no coverage or ratings.
Catalysts and monitorables (next 12 months)
| Monitorable | Why it matters | Timing |
|---|---|---|
| Q2FY27 results | Test of 25–30% growth guidance and 20% margin sustainability | ~mid-Nov 2026 |
| Monthly door output vs 3,500 target | Operating-leverage proof | Quarterly calls |
| Inventory days and short-term debt | Working-capital discipline | Half-yearly balance sheet (Sep 2026) |
| First MNC OEM orders (KONE/Johnson, Wittur) | Customer-quality step-change | Management hoped for "next quarter" |
| EVOQ360 units and exclusive partners (management promised to publish counts) | New growth engine | Ongoing |
| Fire-rated steel door orders | Diversification | FY2027 |
| Fund-raise announcement (QIP / preferential / rights) | Dilution vs growth capital | Any time |
| Effective tax rate normalisation (~25–26%) | EPS quality | Quarterly |
| Steel price trajectory | Margin and sheet volumes | Continuous |
| Promoter intra-group transfers | Succession signals | Ongoing |
Analyst verdict
Aaron Industries is a well-run, founder-controlled micro-cap that has compounded revenue at about 25% a year for four years. It has kept EBITDA margins in a narrow 18–20% band, a creditable record given stainless-steel volatility and a fragmented, price-sensitive customer base. Its strategic logic is coherent:
-
Captive decorative-steel processing gives it a cost and design edge.
-
The FY2024–FY2025 automation capex has created capacity roughly double current output.
-
EVOQ360 and fire-rated doors extend the portfolio into higher-value complete products without new plants.
FY2026 was a transition year rather than a structural deterioration. The 17.5% PAT decline came from the arithmetic of capitalisation (depreciation and interest moving into the P&L) and an anomalously high tax rate. Underlying revenue still grew 18%. Q1FY27's rebound (revenue +27%, PAT +142%, margin 20.2%) supports management's narrative that operating leverage is beginning to show.
Three issues temper conviction:
-
Working capital is the binding constraint. Inventory has swelled, cash is negligible, and management has openly flagged a possible fund-raise.
-
Disclosure quality lags the valuation. Segment results are distorted by unmeasured inter-segment transfers, there is no R&D, payables or export disclosure, and the tax spike is unexplained.
-
The stock still trades around 32x trailing earnings and 5.4x book, with no institutional holders and a ~27% free float. Any execution miss will be punished, as the ~30–38% one-year drawdown from the post-bonus peak shows.
Our synthesis: This is a credible operating story with real, already-paid-for leverage. Whether it becomes an investment story depends on two things through FY2027: delivering the guided 25–30% growth while bringing inventory days back below ~80, and securing at least one multinational OEM supply relationship. Until both are visible, we view the shares as a speculative, execution-dependent growth position. The next two quarterly prints (Q2 and Q3 FY2027) are the decisive checkpoints.
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansExecutive Leadership
Executive Leadership Team
| Name | Title | Tenure | Education | Experience / prior roles |
|---|---|---|---|---|
Amar Chinubhai Doshi | Promoter, Chairman & Managing Director | Founder (2013). CMD since Feb 2018; re-appointed 2024 and again at the 13th AGM (Aug 2026). | Diploma in Man-made Fibre Fabrics | 36+ years in sheet-metal fabrication; MOTI Group. Leads strategy, capacity expansion and business development; oversees the SS polishing division. |
Karan Amar Doshi | Promoter, Whole-Time Director (Production Head) | WTD since Feb 2018; re-appointed Feb 2024 and Aug 2026 | B.E. (University of Pune, 2009); M.S. Mechanical Engineering (University of Southern California, 2011) | 16+ years in industry; heads production processes and schedules |
Monish Amar Doshi | Promoter, Director & CFO | CFO since Feb 2018; retired by rotation and re-appointed Aug 2026 | BBA (University of Pune, 2009); MBA (Sikkim Manipal University, 2013) | 15+ years in sheet-metal fabrication and 14+ in elevators. Responsible for finance, risk, administration, and sales and marketing; leads investor calls. |
Paresh Naik | President | — | — | Leads commercial and international discussions (Q1FY27 call) |
Nitinkumar Maniya | Company Secretary & Compliance Officer | — | Company Secretary | — |
“—” = not publicly disclosed.
Board of Directors
| Director | Category | Committee roles |
|---|---|---|
Amar C. Doshi | Executive, Promoter, Chairman & MD | — |
Karan A. Doshi | Executive, Promoter, WTD | — |
Monish A. Doshi | Executive, Promoter, Director & CFO | — |
Pradeepkumar Choksi | Independent | Chair of Audit Committee; Chair of Nomination & Remuneration Committee; member of Stakeholders Relationship Committee |
Shrungi Desai | Independent (woman director) | Member of Audit and NRC; Chair of Stakeholders Relationship Committee |
Hetal Mehta | Independent | Member of Audit, NRC and SRC |
Board & Management Changes
| Date | Change |
|---|---|
Feb 2024 | Re-appointment of CMD and WTD |
| 2025 | M/s Dhirren R. Dave & Co. appointed Secretarial Auditor for FY2026–FY2030 |
19 Aug 2026 | Re-appointment of CMD Amar Doshi and WTD Karan Doshi; remuneration revisions; Monish Doshi re-appointed on rotation |
FY2027 | Senior sales staff hired for Punjab, Haryana and UP (Q1FY27 presentation) |
Shareholding Trend
| Holder category | Sep 2024 | Mar 2025 | Sep 2025 | Mar 2026 | Jun 2026 |
|---|---|---|---|---|---|
Promoters & promoter group (%) | 73.06 | 73.06 | 73.00 | 73.07 | 73.07 |
Domestic institutions (%) | 0.52 | 0.52 | 0.00 | 0.00 | 0.00 |
Foreign institutions (%) | 0.00 | 0.00 | 0.00 | 0.00 | 0.00 |
Public / retail (%) | 26.43 | 26.43 | 27.00 | 26.93 | 26.93 |
Number of shareholders | 11,516 | 11,473 | 13,721 | 12,387 | 11,985 |
Competitive Landscape
Competitors by Segment
| Segment | Competitor | Type | Relative positioning vs Aaron |
|---|---|---|---|
Elevator OEM (potential customers and indirect competitors) | Otis Elevator Company (India) | MNC subsidiary (US parent) | Full-line OEM. Sources doors and cabins largely in-house or globally. Aaron supplies the fragmented local OEMs that compete with it. |
| — | KONE Elevator India | MNC subsidiary (Finland) | Same; Aaron is in vendor registration (management) |
| — | Schindler India | MNC subsidiary (Switzerland) | Same; samples taken (management) |
| — | TK Elevator India | MNC subsidiary (Germany) | Full-line OEM |
| — | Johnson Lifts | Large Indian private OEM | Vendor registration with Aaron in process (management) |
| — | Mitsubishi Elevator India; Hitachi | MNC subsidiaries (Japan) | Premium segment |
| — | Fujitec India | MNC subsidiary (Japan) | Customer for Aaron's SS sheets |
Door systems / components | Wittur (incl. Sematic) | Global door-system specialist with Indian operations | Direct competitor in auto-door systems with far larger scale; also a prospective customer (vendor registration) |
| — | Unorganised Surat/Ahmedabad/Pune door and cabin fabricators | Local SMEs | Price competitors; Aaron differentiates on automation, design and captive SS |
Home lifts | Nibav Lifts | Indian private (vacuum/pneumatic home lifts) | Named by management as a direct competitor |
| — | Elite Elevators | Indian private (home lifts) | Named by management |
| — | LT Elevator (partnership with Ricardo, per management) | Indian | New home-lift entrant with a different design |
| — | Aritco | Swedish home-lift maker | Premium imports via dealers |
Decorative stainless sheets | Unorganised SS polishing and PVD units; mill-finish suppliers | Mixed | Aaron claims wide variant and customisation range |
Market Share by Competitor
| Company | Latest revenue | Basis | Market share in India |
|---|---|---|---|
Aaron Industries | ₹92.0 Cr (≈US$11M) | FY2026 audited standalone | Not publicly disclosed (very small) |
Otis Worldwide (group) | ≈US$14bn | — | India share not publicly disclosed |
KONE (group) | ≈€11bn | — | — |
Schindler (group) | ≈CHF 11bn | — | — |
TK Elevator (group) | ≈€9bn | — | — |
“—” = not publicly disclosed.
Peer Comparison FY2026
| Metric | Aaron (FY2026) | Otis group (FY2024, approx.) | KONE group (FY2024, approx.) | Schindler group (FY2024, approx.) |
|---|---|---|---|---|
Revenue | ₹92 Cr | ~US$14bn | ~€11bn | ~CHF 11bn |
Revenue growth | +18.1% | Low single-digit (approx.) | Low single-digit (approx.) | Low single-digit (approx.) |
EBITDA / operating margin | 19.2% EBITDA | Mid-to-high teens operating (approx.) | ~12% adjusted EBIT (approx.) | ~12% EBIT (approx.) |
R&D intensity | — | ~1–2% (approx.) | ~2% (approx.) | ~2% (approx.) |
“—” = not publicly disclosed.
Recent Developments
*Upcoming: Q2FY27 results are expected around mid-November 2026, based on the prior-year pattern (13 November 2025).



