Ador Welding Limited Overview
| Field | Detail |
|---|---|
| Legal name | Ador Welding Limited |
| Former names | Advani-Oerlikon Limited (incorporated 22 Oct 1951; renamed Ador Welding Limited on 16 Oct 2003) |
| Founding / incorporation | 22 October 1951, as a joint venture of J. B. Advani & Co. and the Oerlikon-Bührle Group (Switzerland) |
| Incorporation jurisdiction | Maharashtra, India (CIN: L70100MH1951PLC008647) |
| Registered & corporate office | Ador House, 6 K. Dubash Marg, Fort, Mumbai 400 001, Maharashtra, India |
| Promoter / parent | J. B. Advani & Company Pvt. Ltd. (Ador Group holding company, est. 1908) — 45.23% (Sep 2025) |
| Stock exchanges & tickers | NSE: ADOR (formerly ADORWELD); BSE: 517041 |
| ISIN | INE045A01017 |
| CUSIP | Not applicable (no US listing) |
| Fiscal year end | 31 March |
| Shares outstanding | 17,402,815 equity shares of ₹10 face value (Dec 2025 shareholding filing) |
| Employees | 862 (31 Mar 2025, per AR FY2024-25 as cited); "650+" (AR FY2023-24, pre-merger presentation) |
| Statutory auditor | Walker Chandiok & Co. LLP (per AR FY2023-24). The 72nd AGM notice (Jul 2025) included a statutory auditor appointment resolution |
| Internal auditor | Kirtane & Pandit LLP, Pune (AR FY2023-24) |
| Registrar & transfer agent | Sharex Dynamic (India) Pvt. Ltd., Mumbai |
| Credit rating | CARE A+ (Stable) long-term / CARE A1+ short-term, reaffirmed 2 Jan 2026 |
| Market capitalisation (current) | ~₹2,612 cr at ₹1,501 close on 16 Oct 2026 (Screener.in) |
| 52-week range | ₹848 – ₹1,766 |
| Website | www.adorwelding.com |
| Subsidiaries | 3D Future Technologies Pvt. Ltd. (100%, from 25 Sep 2024) |
The entity profiled is the same listed company identified in the request. One identifier has changed: the NSE trading symbol is now ADOR (formerly ADORWELD). Exchange correspondence from mid-2025 onward (e.g., AGM notice dated 23 June 2025, board outcome dated 30 July 2026) uses "Company Symbol: ADOR", while filings up to late 2024 used "ADORWELD". The Yahoo-style ticker supplied (ADORWELD.NS) is therefore likely outdated; the current equivalent is ADOR.NS.
| Metric | FY2024 | FY2025 | FY2026 |
|---|---|---|---|
| Employees (count, standalone, as disclosed) | 650 | 862 | — |
FY2024 figure is the "650+" marketing figure from AR FY2023-24 (pre-merger company); the FY2025 increase largely reflects absorption of ADFL employees.
Ador Welding is India's oldest organised welding company and, after absorbing sister company Ador Fontech in September 2024, a ₹1,140 cr (FY2026) single-segment welding solutions platform spanning consumables (electrodes, solid and flux-cored wires, submerged-arc wires and fluxes), arc-welding and cutting equipment, gas-cutting products, welding automation and robotics, and maintenance-and-reclamation services. It is a debt-free, CARE A+ rated, promoter-controlled small-cap (₹2.6k cr market cap) with ~90,000 MT of annual consumables output, ~30,000 equipment units a year, five manufacturing facilities and a 400+ distributor network. Its competitive identity is "Make-in-India breadth plus brand trust", now being upgraded through technology alliances with ITW/Miller, Hypertherm and Liburdi Dimetrics, and home-grown innovations such as the battery-powered Rhino E welder. Having exited large turnkey flare projects that eroded FY2025–FY2026 earnings, the company is repositioning toward higher-margin automation, cobots and specialised consumables for shipbuilding, nuclear, defence and infrastructure.
What the company does
Ador Welding manufactures and sells products used to join and cut metal, and provides related services. The portfolio, as described by CARE Ratings (Jan 2026) and company filings, covers:
Welding consumables: over 200 types of electrodes, fluxes, flux-cored wires and specially customised electrodes; solid wires and submerged-arc (SAW) wires.
Welding and cutting equipment: manual metal arc (MMA), MIG/MAG, TIG, SAW and air-plasma machines, including battery-powered welders.
-
Gas cutting products and accessories, and personal protective equipment (PPE).
-
Welding automation products and systems (WAPS) — robotic systems, cobots, columns and booms, positioners, rotators, special-purpose machines, CNC cutting machines, CNC bevel cutting, laser welding robotics.
Maintenance & Reclamation (M&R): "life enhancement of industrial components", the erstwhile Ador Fontech business (reclamation, hardfacing, alloys).
Flares & Process Equipment (F&P): design, manufacture, erection and commissioning of flare systems, incinerators, furnaces and process packages for refineries, oil & gas, petrochemicals, fertilisers, steel, pharma and water. From FY2027 this has been realigned toward smaller product lines and folded into the single welding segment.
Skill development / training: via the former Ador Welding Academy (merged into the company effective 16 Mar 2023, appointed date 1 Apr 2021).
Company's own description
The company's investor-facing description (latest filings and press releases) presents itself as India's leading welding and cutting solutions company offering consumables, equipment and automation solutions, under the tagline "Creating the best welding experience". Screener's extraction of the annual report describes it as a leading player in welding products, technologies and services that also provides customised solutions for multi-disciplinary projects in refineries, oil and gas and petrochemicals.
Business model and revenue model
| Revenue stream | Model | Characterisation |
|---|---|---|
| Consumables | Product sale, repeat/consumable | Largest share (industry consumables ≈70% of welding market); recurring, volume-linked to steel consumption and fabrication activity; sold through distributors and directly to large OEM/project customers |
| Equipment | Product sale (capital goods) | Cyclical with industrial capex; aftermarket spares |
| Automation & robotics | Project/solution sale | Engineered-to-order systems; higher ticket and margin, longer cycle |
| Agency/traded products | Resale/distribution | Partner technologies (Miller via ITW, Hypertherm) sold through Ador network |
| M&R services | Service fees | Reclamation and component life extension for process industries |
| F&P projects | Contract revenue (percentage of completion) | Lumpy, historically loss-making since FY2023; now de-emphasised |
| Training | Service | Minor |
There is no subscription or licensing revenue of note. The mix is predominantly product revenue; the precise product/service split is not separately disclosed after the FY2027 move to a single reporting segment.
Value chain position
Ador sits in the mid-stream of the steel-fabrication value chain: it procures steel wire rod, flux minerals, electronic components and gases inputs (steel procured domestically from multiple suppliers per CARE), converts them into consumables and equipment, and sells to fabricators, OEMs, EPC contractors and maintenance teams. It does not hedge commodity prices; it passes through steel price changes with a lag (CARE, Jan 2026).
Customer types and end-markets
Customer types: distributors/dealers (400+), large OEMs, EPC contractors, PSU and private process-industry plants, shipyards, fabricators and MSMEs, export distributors (UAE a key market).
End-markets: infrastructure and construction (pre-engineered buildings), power (thermal, nuclear, renewables/wind), oil & gas and petrochemicals, railways, automotive and transport, heavy fabrication, shipbuilding and defence (newer), steel plants.
- Management highlighted railways and power as demand verticals and shipbuilding, nuclear and defence as emerging verticals (IDBI Capital notes, Oct 2025 & Jan 2026). The company received approvals for nuclear, thermal and defence welding products (IDBI Capital, May 2025).
Independent characterisation
Ador is best understood as a domestic consumables franchise with an option on automation. Its earnings power is dominated by consumables (high volume, moderate margin, distributor-led), while its narrative upside is in automation, cobots, laser and orbital welding, where it increasingly acts as a localiser and channel for global technology (Miller, Hypertherm, Liburdi) rather than as a primary IP owner. The F&P project business has been a value destroyer (cumulative losses of ₹61.26 cr FY2023–H1 FY2026 per CARE), and its restructuring is the single largest driver of the FY2027 earnings rebound.
Strategy
Stated strategic themes (paraphrased from company communications)
-
Focus on the core welding business — exit large turnkey projects; F&P realigned to smaller, profitable product lines (Q4 FY2026 analyst meet).
-
Move up the technology curve — automation, robotics, cobots, laser welding, orbital welding, CNC bevel and H2 cutting.
-
Technology partnerships to localise global products — ITW/Miller, Hypertherm, Liburdi Dimetrics.
-
Margin-accretive new products — battery welders (Rhino E), data mapping/reading solutions, improved fluxes.
-
New end-markets — shipbuilding, nuclear, defence, railways, power, renewables.
-
International expansion — US and Australia entry; UAE stronghold.
-
Operational efficiency and price discipline — mix improvement over volume.
-
Post-merger restructuring into Products and Services verticals (Oct 2024), subsequently simplified to a single Welding segment (FY2027).
Strategic initiatives (last 24 months)
| Initiative | Date | Description / targets |
|---|---|---|
| ADFL merger completion | 25 Sep 2024 | Consolidate Ador Group welding assets; synergies in distribution, sales force, manufacturing |
| Head of Corporate Strategy hire | 3 Jun 2024 | Strategy function created; now combined with CFO role (Aug 2026) |
| Revenue doubling ambition | May 2025 | Management aspiration to 2x revenue in ~4 years (IDBI Capital, May 2025) |
| ESOP 2025 | Jul 2025 | Employee stock option plan; second grant of 36,800 options to 75 employees |
| New product launches | FY2026 | Data mapping product, electric battery welders, improved fluxes |
| ONGC project closure | FY2026 | ~90% complete by Jan 2026; full loss provided in H1 FY2026 |
| ITW Welding / Miller collaboration | 19 Feb 2026 | Advanced SAW, multi-wire SAW and high-amp MIG for power, wind, shipbuilding, PEB, transport |
| Liburdi Dimetrics MoU | 2,026 | Orbital welding for power, nuclear, oil & gas, shipbuilding |
| Hypertherm collaboration | Not dated | Plasma cutting systems |
| Robotics/cobot/laser portfolio | 2025–2026 | Robotic welding systems, cobots, laser welding robotics, CNC bevel and H2 cutting |
| Single-segment reporting | FY2027 | Simplified structure |
| CFO + strategy combination | 15 Aug 2026 | Signals focus on strategic execution and potentially M&A capability (new CFO's profile includes M&A) |
Sustainability commitments
Solar installations (633 KWP total across Raipur and Silvassa), recyclable paper packaging for SAW flux, ~15% energy saving in equipment testing. No quantified net-zero or emissions target was found.
Medium-term financial targets / guidance
-
Management declines to give explicit revenue guidance given supply-chain and macro uncertainty, but aims to outperform India's industrial production growth (Q4 FY2026 call).
-
Aspiration (May 2025) to double revenue over four years — implying ~19% CAGR from FY2025's ₹1,123 cr to ~₹2,250 cr by ~FY2029. FY2026's 1.5% growth puts this materially behind schedule.
-
Process-equipment vertical expected to sustain ₹25–30 cr annual revenue (IDBI Capital, Jan 2026).
-
Q1 FY2027: management said the year began strongly, reflecting healthy domestic and export order inflows.
Products & Services
Ador does not publish a priced catalogue; pricing models below are inferred from business type, and specifications are limited to what is publicly disclosed. Launch years are given only where verified.
Welding Consumables (Welding segment)
| Product line | Description / capabilities | Target customer | Launch / latest | Notes |
|---|---|---|---|---|
| Manual metal arc (stick) electrodes | 200+ grades across mild steel, low-hydrogen, low-alloy, stainless, cast iron, hardfacing and special customised electrodes | Fabricators, construction, maintenance, OEMs | Legacy core line | Largest volume product; distributor-led |
| Ni-Cr and high-alloy consumables | Nickel-chromium consumables for high-impact and strategic applications | Power, petrochemical, defence, nuclear | Approvals for nuclear/thermal/defence obtained (2025) | Higher-margin specialty |
| Solid wires (MIG/MAG) | Copper-coated and other solid wires for semi-automatic and robotic welding | Auto, transport, heavy fabrication | Ongoing | Benefits from automation trend |
| Flux-cored wires (FCW) | Gas-shielded and self-shielded FCW | Shipbuilding, structural, heavy fabrication | New Silvassa FCW facility 2024 | Subject of Oct 2026 BIS compliance matter |
| Submerged-arc (SAW) wires and fluxes | Wires and agglomerated/fused fluxes, including "improved fluxes" launched recently | Pipe mills, wind towers, pressure vessels, PEB | Improved fluxes cited by CARE (Jan 2026) | Packaging moved to recyclable paper bags |
| TIG filler rods | Filler rods for GTAW | Process piping, fabrication | — | — |
Capacity: ~90,000 MT per year welding consumables output (CARE, Jan 2026; Trade Brains, Jul 2026). An older disclosure cites installed capacity of 1,07,800 tpa for electrodes, continuous wires and fluxes (IIFL company summary).
Welding & Cutting Equipment (Welding segment)
| Product line | Description | Target customer | Launch / latest | Flagship |
|---|---|---|---|---|
| MMA inverter welders | Portable stick welders | Fabricators, maintenance, MSMEs | Ongoing | "Champ" series (Wright Research description) |
| MIG/MAG synergic machines | Advanced multipurpose synergic GMAW | Auto, fabrication | Ongoing | — |
| TIG machines | GTAW power sources | Process piping, stainless fabrication | Ongoing | — |
| SAW machines | Submerged arc power sources and tractors | Heavy fabrication, wind, pipes | Augmented by Miller via ITW (Feb 2026) | — |
| Battery-powered welder | Welding equipment using battery as main power source | Remote sites, infrastructure, field maintenance | Recognised in CII Top 100 innovative companies (FY2026) | Rhino E — described as India's first battery-powered electric welder |
| Air plasma cutting | Plasma cutters | Fabrication | Augmented by Hypertherm collaboration | — |
| Data mapping / weld data reading solutions | Equipment/data products for higher efficiency and lower loss | Industrial users | Introduced FY2026 | Gaining traction (CARE) |
Capacity: ~30,000 equipment units per year (CARE; Trade Brains).
Cutting Products, Gas Equipment & PPE
| Product line | Description | Launch |
|---|---|---|
| Gas cutting torches, regulators, accessories | Oxy-fuel cutting and welding accessories | "King Series" launched 2012 |
| CNC cutting machines | Profile cutting machines | Ongoing |
| CNC bevel cutting | Bevel cutting solutions | Recently introduced (2026) |
| H2 cutting solutions | Hydrogen-based cutting | Recently introduced (2026) |
| Personal protective equipment | Helmets, gloves and welding safety gear | King Series 2012 onward |
Welding Automation Products & Systems (WAPS)
| Product line | Description | Target customer | Status |
|---|---|---|---|
| Robotic welding systems | Integrated robot cells | Auto, transport, heavy fabrication | Recently introduced/expanded |
| Cobots | Collaborative robots for standardised welding tasks | MSMEs, job shops | Recently introduced |
| Laser welding robotics | Customised laser welding solutions | Precision manufacturing | Recently introduced |
| Columns & booms, positioners, rotators | Heavy fabrication handling equipment | Pressure vessels, wind towers | Legacy line |
| Special-purpose machines | Custom automation | OEMs | Legacy line |
| Orbital welding systems | Via Liburdi Dimetrics MoU | Power, nuclear, oil & gas, shipbuilding | New (2026) |
Partner/Agency Technologies
| Partner | Products distributed/localised | Date |
|---|---|---|
| ITW Welding India (Miller brand) | SAW and multi-wire SAW systems; high-amperage MIG for heavy fabrication and transport | Announced 19 Feb 2026 |
| Hypertherm | Plasma cutting systems | — |
| Liburdi Dimetrics | Orbital welding and advanced automated welding | MoU, 2026 |
Maintenance & Reclamation (erstwhile Ador Fontech)
Ador Fontech's business was described in the 2022 merger disclosure as "Life Enhancement of Industrial Components" — reclamation and protection of worn industrial parts through hardfacing, specialised alloys and coatings, sold mainly to process industries (cement, steel, power, mining).
3D Future Technologies Pvt. Ltd. (subsidiary)
Wholly owned subsidiary since 25 Sep 2024 (previously ADFL's subsidiary; ADFL had invested ₹1,725 lakh in its equity). Its name indicates additive manufacturing/3D technologies; its specific offerings and revenues are not publicly disclosed in the sources reviewed. It is immaterial to consolidated revenue (consolidated vs standalone revenue differ by <₹1 cr per quarter).
Flares & Process Equipment (being wound down to small product lines)
Flare systems, incinerators, furnaces and process packages; design, engineering, procurement, erection and commissioning. Management states it will pursue only smaller, profitable projects, with ₹25–30 cr per year of process-equipment revenue considered sustainable (IDBI Capital, Jan 2026).
Training
Ador Welding Academy (merged March 2023) trains welders in SMAW, oxy-fuel and resistance spot welding, among others.
Financial Narrative
Source for annual series: Screener.in (C-MOTS), consolidated for FY2022, FY2024–FY2026; standalone for FY2023 (no restated consolidated FY2023 available). FY2024 restated to include ADFL. All INR cr unless stated.
Income statement
Notes:
-
EPS diluted: ESOP 2025 dilution is immaterial (two grants, the second of 36,800 options); diluted EPS not separately compiled.
-
FY2024 vendor EPS (63.58) is computed on the pre-allotment share base of ~13.6 mn; on the post-merger 17.40 mn base it equals ~₹49.7.
-
Gross profit: annual gross profit is not compiled in the sources reviewed; Q1 FY2027 gross profit was ₹113 cr (36.5% margin, down 240 bps YoY) per the Q1 FY2027 investor presentation summary.
-
FY2025 ₹20 and FY2026 ₹23 per MarketScreener and company filings.
-
CARE's consolidated figures differ slightly: total operating income ₹1,079.46 cr (FY2024 restated) and ₹1,130.10 cr (FY2025); PBILDT ₹125.09 cr and ₹113.05 cr; PAT ₹86.46 cr and ₹60.05 cr. The variance arises from CARE including certain operating income items.
-
FY2026 consolidated revenue: Screener ₹1,140 cr; analyst-meet summary cites ₹1,135 cr sales (likely standalone, which Screener shows as ₹1,135 cr); MarketScreener ₹1,140 cr.
Margins and growth
Revenue CAGR FY2022–FY2026: ~14.6% (heavily inorganic due to ADFL merger). Organic post-merger CAGR FY2024–FY2026: ~3.0%. FY2022 growth is off the COVID-depressed FY2021 base (₹448 cr).
Quarterly trajectory (most recent five quarters)
Sources: company releases via JM Financial/Capital Market (Q1 FY2027), HDFC Sky (Q2 FY2026), Kotak Neo (Q3, Q4 FY2026), Screener.in. Q3 FY2026 revenue: Screener shows ₹288 cr while a ScanX summary cites ₹286.95 cr — a minor source discrepancy (likely consolidated vs standalone).
TTM to Q1 FY2027: revenue ~₹1,198 cr; EBITDA ~₹161 cr (13.4%); PAT ~₹114 cr; EPS ~₹65.2 (Screener).
Balance sheet
Cash & liquid investments: ₹101 cr at 31 Mar 2025; ₹85.66 cr at 30 Sep 2025 (CARE).
Debt split: The company has no long-term borrowings (CARE); all debt is short-term working capital. Overall gearing 0.04x at 31 Mar 2025 per CARE (CARE's definition includes lease and non-fund items).
Net debt: FY2025 ≈ –₹99 cr (net cash: ₹2 cr borrowings less ₹101 cr cash/liquid investments).
Goodwill & intangibles: not separately disclosed in sources reviewed; merger was accounted for as a common-control combination, so material goodwill is not expected.
Working capital: Working capital days 54 (FY2022), 65 (FY2023 standalone), 56 (FY2024), 58 (FY2025), 53 (FY2026).
- Other equity at 31 Mar 2026: ₹53,705 lakh (Q1 FY2027 release).
Cash flow
Capex: Implied capex (CFO less FCF) ₹42 cr (FY2024), ₹39 cr (FY2025), ₹22 cr (FY2026). Segment capex reported to MarketScreener: Products ₹48.5 cr (FY2025), Welding ₹23.9 cr (FY2026). CARE noted an FY2026 capex plan of ~₹40 cr funded from internal accruals; actual spend appears lower. FY2026 investing outflow of ₹66 cr was larger than capex, implying deployment into investments.
Dividends paid: FY2026 cash dividend for FY2025 at ₹20 × 17.40 mn shares ≈ ₹34.8 cr. FY2027 payout for FY2026 at ₹23 ≈ ₹40.0 cr (paid 22 Aug 2026).
Buybacks: None.
- FY2025 financing outflow of ₹94 cr reflects repayment of ~₹43 cr of working-capital debt plus dividends.
Ratios
-
FY2022–FY2024 average-based ROE/ROA not computed because FY2023 restated consolidated equity is unavailable. Screener's latest ROE: 15.8% (consolidated), 3-year average 16%.
-
ROIC: not separately disclosed; ROCE is the closest proxy.
-
Current ratio: not compiled from sources reviewed.
-
Net debt/EBITDA: negative (net cash) throughout FY2025–FY2026.
-
CARE's interest coverage (PBILDT/interest): 22.58x (FY2024 restated), 18.26x (FY2025), 20.65x (H1 FY2026); CARE's narrative also cites ~33x in FY2025 on a different basis.
Commentary on trends, inflections and drivers
Revenue. The headline 14.6% FY2022–FY2026 CAGR is flattering: the FY2024 step-up from ₹777 cr to ₹1,074 cr is mostly the ADFL merger restatement. Organic growth since then has been anaemic — 4.6% in FY2025 and 1.5% in FY2026 — because (i) welding volumes were flat amid a slowdown in private capex and falling steel prices in Q2–Q3 FY2025 (CARE), (ii) management chose price discipline over volume in H1 FY2026 (CARE: H1 FY2026 TOI +2.2% "despite stagnant volumes"), and (iii) F&P revenue fell from ₹84 cr to ₹57 cr as the ONGC project wound down. The Q1 FY2027 print (+22.9% YoY) is the first meaningful inflection, though it is flattered by a weak Q1 FY2026 base that included F&P disruption.
Margins. EBITDA margin troughed at 9.3% in FY2025 on F&P losses and recovered to 10.8% in FY2026 despite a negative Q1 (–1.8%). Excluding Q1 FY2026, the H2 FY2026 run-rate was ~15%, the best in the company's recorded history. Q1 FY2027 at 13.8% reflects lower gross margin (36.5%, –240 bps YoY) partly offset by operating leverage; gross margin compression suggests input-cost inflation not yet fully passed through. CARE's upgrade trigger is a sustained operating margin above 13%; the company is now operating near that threshold.
Earnings. FY2025 net income fell 30% (₹86 cr → ₹60 cr) due to F&P losses and merger-related costs (exceptional VRS-type charge for M&R employees in Q2 FY2025, and a Q2 FY2025 standalone other-income loss of ₹36 cr associated with merger accounting). FY2026 net income rose 36.5% to ₹82 cr even after absorbing ~₹27.9 cr of ONGC provisions and a ₹5.9 cr labour-code exceptional, helped by ₹8.44 cr recovery of Kuwait receivables booked in other income. The standalone FY2026 PAT growth of ~90% headlined by some media reflects the depressed FY2025 standalone base (₹43 cr).
Balance sheet and cash. The company is effectively debt-free and cash-generative: operating cash flow of ₹253 cr over FY2025–FY2026 against capex of ~₹61 cr. Working capital improved sharply in FY2026 as payables days rose to 100 (from 63), though debtor and inventory days both lengthened — the CCC improvement is supplier-funded and may partly reverse.
Returns. ROCE of 23% (FY2026) is healthy for an Indian industrial small-cap but below the 27–28% achieved pre-merger by the standalone business, reflecting dilution from the merged M&R business and F&P losses. CARE's positive trigger is ROCE >25% sustained.
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansFinancial Detail
Reported Segments by Period
| Period | Reported segments | Notes |
|---|---|---|
FY2017–FY2019 | Consumables; Equipment & Project Engineering Business (incl. flares) | Consumables revenue ₹536 cr (FY2017), ₹615 cr (FY2018), ₹679 cr (FY2019) per MarketScreener segment history |
FY2020–FY2023 | Consumables; Equipment & Automation; Flares & Process Equipment | F&P carved out as separate segment |
FY2025 (post-merger) | Products; (M&R / Services from erstwhile ADFL); Flares & Process Equipment | Company announced a two-vertical structure (Products and Services) at merger completion (Oct 2024); MarketScreener lists Product, Services and M&R segments |
FY2026 | Welding; Flares & Process Equipment | Products and services consolidated into "Welding" |
FY2027 onward | Single segment (Welding) | Per IDBI Capital (May 2026), no segment reporting from FY2027 as all segments merged into core welding |
Revenue by Segment
| Segment | FY2024 | FY2025 | FY2026 |
|---|---|---|---|
Welding / Products (INR Cr) | — | 900 | 1,079 |
Flares & Process Equipment (INR Cr) | 35 | 84 | 57 |
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansRevenue by Segment and Segment Margins & Growth (%)
| Segment metric | FY2025 | FY2026 |
|---|---|---|
Welding/Products segment EBT (INR Cr) | 116 | 164 |
Welding/Products segment EBT margin (%) | 12.9 | 15.2 |
Revenue by Segment and Segment Margins & Growth (%) (Quarterly)
| Segment metric | Q3FY2025 | Q2FY2026 | Q3FY2026 |
|---|---|---|---|
Welding segment revenue (INR Cr) | 259.3 | 270.9 | 265.5 |
Welding segment EBIT margin (%) | 12.8 | 16.2 | 14.6 |
Income Statement and Margin Analysis (%)
| Metric | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|---|
Revenue from operations (INR Cr) | 661 | 777 | 1,074 | 1,123 | 1,140 |
Operating expenses (INR Cr) | 601 | 688 | 955 | 1,019 | 1,017 |
EBITDA excl. other income (INR Cr) | 61 | 89 | 119 | 104 | 123 |
Other income (INR Cr) | 14 | 6 | 19 | 7 | 15 |
Depreciation (INR Cr) | 11 | 12 | 16 | 18 | 19 |
EBIT excl. other income (INR Cr) | 50 | 77 | 103 | 86 | 104 |
Interest (INR Cr) | 6 | 4 | 6 | 6 | 4 |
Pre-tax income (INR Cr) | 58 | 79 | 117 | 87 | 115 |
Tax rate (%) | 22 | 25 | 26 | 31 | 29 |
Net income (INR Cr) | 45 | 59 | 86 | 60 | 82 |
EPS basic as reported by data vendor (INR) | 33.21 | 43.60 | 63.58 | 34.51 | 47.11 |
EPS on post-merger 17.40 mn shares (INR) | — | — | 49.7 | 34.5 | 47.1 |
Dividend per share (INR) | — | — | — | 20 | 23 |
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansMargin Analysis (%)
| Metric | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|---|
EBITDA margin (%) | 9.2 | 11.5 | 11.1 | 9.3 | 10.8 |
EBIT margin (%) | 7.6 | 9.9 | 9.6 | 7.7 | 9.1 |
Pre-tax margin (%) | 8.8 | 10.2 | 10.9 | 7.7 | 10.1 |
Net margin (%) | 6.8 | 7.6 | 8.0 | 5.3 | 7.2 |
Revenue growth YoY (%) | 47.5 | 17.5 | 38.2 | 4.6 | 1.5 |
Income Statement and Margin Analysis (%) (Quarterly)
| Metric | Q1FY2026 | Q2FY2026 | Q3FY2026 | Q4FY2026 | Q1FY2027 |
|---|---|---|---|---|---|
Revenue from operations (INR Cr) | 251.84 | 281.09 | 288 | 318.97 | 309.46 |
EBITDA excl. other income (INR Cr) | -4 | 35 | 44 | 47 | 42.73 |
EBITDA margin (%) | -1.8 | 12.4 | 15.3 | 14.7 | 13.8 |
Pre-tax income (INR Cr) | -5.04 | 33.67 | 36.05 | 50.32 | 36.93 |
Net income (INR Cr) | -3.95 | 25.01 | 26.72 | 34.20 | 27.60 |
EPS (INR) | -2.27 | 14.37 | 15.35 | 19.65 | 15.86 |
Balance Sheet
| Metric | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|---|
Total assets (INR Cr) | 393 | 452 | 681 | 694 | 832 |
Net fixed assets (INR Cr) | 117 | 123 | 157 | 197 | 204 |
Capital work in progress (INR Cr) | 7 | 2 | 25 | 4 | 3 |
Investments (INR Cr) | 20 | 20 | 39 | 32 | 47 |
Total borrowings (INR Cr) | 2 | 17 | 45 | 2 | 3 |
Shareholders' equity (INR Cr) | 282 | 324 | 473 | 507 | 554 |
Other liabilities incl. payables (INR Cr) | 109 | 111 | 163 | 184 | 274 |
Cash Flow and Margin Analysis (%)
| Metric | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|---|
Operating cash flow (INR Cr) | 26 | 14 | 58 | 137 | 116 |
Investing cash flow (INR Cr) | -5 | -10 | -44 | -17 | -66 |
Financing cash flow (INR Cr) | -31 | -5 | -19 | -94 | -38 |
Free cash flow per data vendor (INR Cr) | 28 | 0 | 16 | 98 | 94 |
CFO to EBITDA (%) | 67 | 36 | 77 | 155 | 122 |
Returns & Leverage Ratios (%) and Financial Ratios (x)
| Ratio | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|---|
ROE on average equity (%) | — | — | — | 12.2 | 15.5 |
ROA on average assets (%) | — | — | — | 8.7 | 10.7 |
ROCE per data vendor (%) | 20 | 27 | 28 | 20 | 23 |
Debt to equity (x) | 0.01 | 0.05 | 0.10 | 0.004 | 0.005 |
Interest coverage EBIT incl OI to interest (x) | 10.7 | 20.8 | 20.5 | 15.5 | 29.8 |
Asset turnover on average assets (x) | — | — | — | 1.63 | 1.49 |
Debtor days | 51 | 59 | 61 | 63 | 74 |
Inventory days | 70 | 81 | 77 | 64 | 78 |
Payable days | 60 | 51 | 45 | 63 | 100 |
Cash conversion cycle (days) | 61 | 89 | 93 | 64 | 53 |
Region Overview
| Region | FY2025 |
|---|---|
Export revenue (INR Cr) | 153 |
Domestic revenue derived (INR Cr) | 970 |
Valuation Snapshot
| Metric | Value | Source |
|---|---|---|
Last close | ₹1,501 (16 Oct 2026) | Screener |
52-week high / low | ₹1,766 / ₹848 | Screener |
YTD change (from ~₹1,064 on 1 Jan 2026) | ~+41% | Derived from MarketScreener YTD data |
1-year return | ~+30% | Screener |
3-year price CAGR | ~7% | Screener |
5-year price CAGR | ~16% | Screener |
10-year price CAGR | ~19% | Screener |
Valuation Multiples
| Multiple | Ador Welding | Basis |
|---|---|---|
P/E (TTM) | 22.6x | Screener, consolidated TTM EPS ~₹65 |
P/E FY2027E | ~23x | ₹1,501 / consensus EPS ₹64.5 |
P/E FY2028E | ~18x | ₹1,501 / consensus EPS ₹81.9 |
P/B | ~4.7x | Book value ₹319/share |
EV/EBITDA (TTM) | ~16x | Market cap ₹2,612 cr / TTM EBITDA ₹161 cr (before net cash adjustment) |
EV/Sales (TTM) | ~2.2x | Market cap / TTM revenue ₹1,198 cr (before net cash adjustment) |
Dividend yield | ~1.5% | ₹23 / ₹1,501 |
Income Statement and Per-Share Data
| Metric | FY2026A | FY2027E | FY2028E |
|---|---|---|---|
Net sales (INR Cr) | 1,140 | 1,300 | 1,488 |
EBITDA (INR Cr) | 121 | 163 | 201 |
Net income (INR Cr) | 82 | 112 | 143 |
EPS (INR) | 47.06 | 64.5 | 81.9 |
DPS (INR) | 23 | 21 | 22.1 |
Per-Share Data and Returns & Leverage Ratios (%)
| Metric | FY2025 | FY2026 |
|---|---|---|
Dividend per share (INR) | 20 | 23 |
Payout ratio (%) | 58 | 49 |
Credit Ratings
| Agency | Facility | Rating | Outlook | Date |
|---|---|---|---|---|
CARE Ratings | Long-term bank facilities (₹62.50 cr) | CARE A+ | Stable | 2 Jan 2026 |
CARE Ratings | LT/ST bank facilities (₹113.00 cr) | CARE A+ / CARE A1+ | Stable | 2 Jan 2026 |
CARE Ratings | Short-term bank facilities (₹56.00 cr) | CARE A1+ | — | 2 Jan 2026 |
CRISIL | Bank facilities | — | — | 14 May 2024 |
Analyst Conclusions
Management guidance
No numerical guidance. Management aims to outperform industrial production growth, cites healthy domestic and export order inflows at the start of FY2027, and has signalled that F&P will no longer drag results. The aspirational May 2025 target of doubling revenue in four years remains unrestated and appears out of reach on the current trajectory.
Consensus expectations
FY2027E: revenue +14% to ~₹1,300 cr, EBITDA +34% to ~₹163 cr (12.5% margin), PAT +37% to ~₹112 cr. FY2028E: revenue +14.5%, PAT +27%.
Bull case
-
Earnings normalisation is mechanical: F&P losses (₹27.9 cr provision in H1 FY2026 alone) disappear, and the H2 FY2026 run-rate (EBITDA margin ~15%, quarterly PAT ₹27–34 cr) annualises to PAT of ₹110–130 cr — a 35–60% uplift on FY2026's ₹82 cr.
-
Growth is re-accelerating: Q1 FY2027 revenue +22.9% with domestic and export order strength; automation, Miller-SAW, orbital welding and strategic-sector approvals expand the addressable market beyond commodity electrodes.
-
Balance sheet optionality: debt-free with ₹100 cr-scale liquidity and ~₹100 cr annual FCF (FY2025–FY2026), enabling higher payouts (interim dividend under consideration), capacity investment or bolt-on M&A under a CFO with M&A credentials.
Bear case
-
The organic engine is weak: post-merger revenue grew only ~3% CAGR (FY2024–FY2026) with flat volumes; Q1 FY2027 growth is flattered by an easy base.
-
Margins face input pressure: Q1 FY2027 gross margin fell 240 bps YoY to 36.5%; steel volatility is unhedged and the CCC improvement relied on stretched payables (100 days).
-
Valuation leaves little room: at ~23x FY2027E EPS and ~4.7x book after a ~41% YTD rally, the stock trades above the most recent published broker target (₹1,251); any Q2 disappointment or partner/leadership hiccup could de-rate it.
Key catalysts and monitorables (next 12 months)
| Catalyst | Timing | What to watch |
|---|---|---|
| Q2 FY2027 results and interim dividend decision | 21 Oct 2026 | Revenue growth vs +23% in Q1; gross margin trend; interim dividend initiation |
| ONGC/turnkey project closure | H2 FY2027 | Final completion; no further provisions |
| Miller/ITW, Liburdi, Hypertherm traction | FY2027 | Disclosure of automation/partner revenue share |
| CFO transition | Ongoing | Capital allocation framework, M&A signals |
| Working capital | Q2–Q4 FY2027 | Debtor and inventory days normalisation |
| Export momentum | FY2027 | US/Australia traction; UAE |
| CARE rating review | ~Jan 2027 | Potential upgrade if margins >13% and ROCE >25% sustained |
| BIS/compliance | Ongoing | Any further quality-certification issues |
| Q3/Q4 FY2027 results and FY2027 dividend | Jan & Apr 2027 | Delivery vs ₹112 cr PAT consensus |
Concluding analyst verdict
Ador Welding enters the second half of FY2027 in better shape than at any point since the Ador Fontech merger was conceived in 2022. The company has done the hard, unglamorous work: it absorbed its sister company, simplified to a single welding segment, took the full hit on a disastrous ONGC flares contract, recovered stranded Kuwait receivables, and kept the balance sheet virtually debt-free while paying a record dividend. The core welding franchise, stripped of project noise, demonstrated 15–16% segment EBIT margins in FY2026 — evidence that the underlying consumables-and-equipment business is healthier than headline numbers suggested. Q1 FY2027's 23% revenue growth and ₹27.6 cr profit indicate that the earnings recovery is real, not just accounting.
The investment debate, however, has shifted from "will earnings recover?" to "can Ador grow?" Here the evidence is thinner. Post-merger organic growth has averaged roughly 3%, the company owns minimal proprietary IP, its premium-technology push depends on partners who could eventually go direct, and its growth ambitions (doubling revenue in four years) are already behind schedule. Leadership churn — in automation, F&P and now finance — adds execution risk precisely when the strategy demands new capabilities.
At ~₹1,500, the market already discounts consensus FY2027 earnings of ~₹112 cr at about 23x, a fair but not cheap multiple for a business with ~23% ROCE and ~14% expected growth, and a meaningful discount to ESAB India that is justified by the quality gap. Our synthesis is constructive on fundamentals but neutral on near-term risk-reward: the stock is a quality, cash-generative small-cap whose next leg of re-rating requires proof of sustained double-digit organic growth and stable gross margins over the next two to three quarters. Investors should treat the 21 October 2026 results and any interim-dividend initiation as the first test, with gross margin and working capital as the key tells.
SOURCE INDEX (principal)
-
BSE/NSE filings: merger effectiveness (25 Sep 2024), subsidiary status (26 Sep 2024), allotment (3 Oct 2024), Q2 FY2025 results notes (13 Nov 2024), fractional-share reports (27 Dec 2024), board outcome CFO change (30 Jul 2026), senior management change (1 Apr 2026), governance iXBRL (Apr 2026), board meeting intimation (12 Oct 2026), BIS disclosure (15 Oct 2026).
-
CARE Ratings press release, Ador Welding Limited, 2 January 2026.
-
IDBI Capital result reviews: Q4 FY2025 (13 May 2025), Q1 FY2026 (Aug 2025), Q2 FY2026 (17 Oct 2025), Q3 FY2026 (20 Jan 2026), Q4 FY2026 (4 May 2026).
-
Screener.in consolidated and standalone financials (accessed Oct 2026); MarketScreener financials, segments, consensus and governance pages (Aug–Sep 2026).
-
Company results via JM Financial/Capital Market, Equitybulls, FilingReader, HDFC Sky, Kotak Neo, Trade Brains, ScanX (Jul 2025 – Oct 2026).
-
Trade press: Industrial Automation India and The Machine Maker (ITW/Miller, Feb 2026); Maritime Gateway (Liburdi MoU, 2026); Indian Cement Review (merger completion, Oct 2024); Sahi/CXO Digital Pulse (CFO appointment, Jul–Aug 2026).
-
ICICI Direct research note on merger terms (Jun 2022); IIFL company summary; Emkay Global shareholding data; Fyers peer table; Patsnap; Simply Wall St (compensation).
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansExecutive Leadership
Executive Leadership Team
| Name | Title | In role since | Background | Compensation (latest available) |
|---|---|---|---|---|
Aditya T. Malkani | Managing Director | Sep 2020 (re-appointed by special resolution, AGM 23 Jul 2026) | Promoter family; BA (Economics), MBA; earlier Non-Executive Director of AWL, Chairman of Ador Fontech; Independent Director of Batliboi Ltd | ~₹1.71 cr total (90.6% salary, 9.4% bonus) per Simply Wall St |
Ninotchka Malkani Nagpal | Executive Chairman | 19 Nov 2019 | Promoter family; ~26+ years in financial management of Ador Welding and Ador Group; former Chairman of Ador Fontech; Chairman of J. B. Advani & Co. | ~₹1.78 cr; holds ~1.65% |
Krishnamurthy Suryanarayan | CFO & Head – Strategy (KMP) | 15 Aug 2026 (joined as Head – Corporate Strategy, 3 Jun 2024) | 25+ years; previously CFO of Astec LifeSciences; roles at Parag Milk Foods, CEAT, Godrej Consumer Products | — |
Surya Kant Sethia | CFO (outgoing) | ~2015/2020 – 14 Aug 2026 | 11-year tenure; resigned for personal reasons | — |
Lajpat Yadav | COO – India Welding Business | 6 Jan 2025 | Leads domestic welding; spokesperson for ITW/Miller tie-up | — |
Vinit Mangrulkar | Vice President – Sales | 9 Jul 2026 | Background in bearings and power transmission sectors | — |
Pradnya Nitin Iyer | Head – HR | 13 Aug 2026 | — | — |
V. M. (Vinayak Manohar) Bhide | Company Secretary & Compliance Officer | Long-serving | — | — |
“—” = not publicly disclosed.
Board of Directors
| Name | Category | Since | Notes |
|---|---|---|---|
Ninotchka Malkani Nagpal | Executive Chairman (promoter) | Director 1997; Chair 2019 | — |
Aditya T. Malkani | Managing Director (promoter) | Director 2007 | — |
Ravin A. Mirchandani | Non-Executive, Non-Independent (promoter group) | 2006 | Re-appointed on rotation at 2026 AGM; Chairperson of Ador Powertron Ltd and Ador Digatron |
Deep A. Lalvani | Non-Executive, Non-Independent (promoter group) | 2007 | MD of J. B. Advani & Co.; director of Ador Powertron and Ador Green Energy |
Tanya H. Advani | Non-Executive, Non-Independent (promoter group) | 2019 | — |
Nita Dempo Mirchandani | Independent | 2020 | — |
Navroze S. Marshall | Independent | 2022 | Committee chairperson (from 11 Aug 2023 per governance filing) |
Jitendra Panjabi | Independent | 28 Jul 2024 | Committee member |
Mihir Jayaraman | Independent | 2024 | — |
Santosh Janakiram Iyer | Independent | 7 May 2025 | Committee member |
Board & Management Changes
| Date | Change | Context |
|---|---|---|
27–28 Jul 2024 | Three independent directors retire (second terms complete) | Board refresh; Panjabi and others appointed |
Sep 2024 | Ajay Gorasia resigns as Head – F&P | Precedes F&P losses deepening |
Nov 2024 | Gaurav M. Lalwani ceases as independent director | — |
6 Jan 2025 | Lajpat Yadav appointed COO – India Welding | Post-merger integration |
7 May 2025 | Santosh J. Iyer appointed independent director | — |
10 Sep 2025 | Sujit Barde resigns as Head – Welding & Cutting Automation | Leadership gap in a growth area |
1 Apr 2026 | Senior management retirement and redesignation | — |
9 Jul 2026 | Vinit Mangrulkar appointed VP – Sales | Distribution expansion |
23 Jul 2026 | MD Aditya Malkani re-appointed; Ravin Mirchandani re-appointed | AGM |
30 Jul 2026 | CFO S. K. Sethia resigns; K. Suryanarayan named CFO & Head – Strategy from 15 Aug | Combination of finance and strategy roles |
13 Aug 2026 | Pradnya N. Iyer appointed Head – HR; redesignations | Senior management reshuffle |
Shareholding Trend
| Holder category | Jun2025 | Sep2025 | Dec2025 | Mar2026 | Jun2026 |
|---|---|---|---|---|---|
Promoters (%) | 53.71 | 53.73 | 53.74 | 53.76 | 53.76 |
FIIs (%) | 0.07 | 0.09 | 0.14 | 0.37 | 1.05 |
DIIs (%) | 11.85 | 12.44 | 12.56 | 12.63 | 10.47 |
Public/retail (%) | 34.37 | 33.76 | 33.57 | 33.26 | 34.72 |
Competitive Landscape
Key Competitors
| Competitor | Type | Segments competed | Positioning vs Ador |
|---|---|---|---|
ESAB India Ltd (subsidiary of ESAB Corp, US) | Listed MNC (NSE: ESABINDIA) | Consumables, equipment, cutting, automation | Closest listed peer; stronger margins and valuation; global technology |
Lincoln Electric (incl. Indian operations) | Global MNC | Consumables, equipment, automation | Global leader; strong in automation |
ITW Welding (Miller, Hobart) | Global MNC | Equipment, consumables | Now also an Ador partner for selected Miller products — "co-opetition" |
Kobe Steel (Kobelco welding) | Global | Consumables (FCW, SAW) | Premium consumables, Japanese OEM ties |
Fronius | Global (Austria, private) | Equipment, automation | Premium equipment |
Kemppi | Global (Finland, private) | Equipment | Premium equipment |
Panasonic / OTC Daihen | Global | Robotic welding | Automation |
D&H Sécheron Electrodes | Indian (unlisted) | Consumables | Major domestic consumables rival |
Mangalam/ Royal Arc Electrodes (NSE SME: ROYALARC) | Indian SME | Electrodes | Small, price-competitive |
Classic Electrodes (NSE SME) | Indian SME | Electrodes | Small |
Chinese equipment brands (e.g., Jasic, Riland) | Importers | Inverter equipment | Low-cost inverter competition |
Unorganised sector | Many local players | Electrodes | 45–50% of market (CARE) |
Hypertherm | Global | Plasma cutting | Partner rather than competitor in plasma |
Peer Comparison FY2026
| Company | Market cap (INR Cr) | PAT TTM (INR Cr) | P/E (x) | Source/date |
|---|---|---|---|---|
Ador Welding | 2,612 | 114 | 22.6 | Screener, 16 Oct 2026 |
ESAB India | 8,641 | 207 | 38.9 | Fyers peer table, ~Aug 2026 |
Royal Arc Electrodes (SME) | 178 | 10 | 17.7 | Fyers peer table, ~Aug 2026 |



