Arfin India Limited Overview
Arfin India is a Gujarat-based, promoter-controlled secondary-aluminium and alloys processor. It converts aluminium scrap and primary metal into intermediate products for three industrial end-markets: steelmaking, automotive and power transmission. For steel it supplies aluminium deoxidisers (deox notch bars, cubes and shots), calcium-silicon and other cored wires, and ferro-titanium. For automotive and foundry users it makes secondary aluminium alloy ingots. For power utilities and EPC contractors it supplies aluminium wire rod and bare overhead conductors (AAC/AAAC/ACSR, including AL-59), and it is expanding into covered and Extra High Voltage conductors. Capacity is about 71,000 tonnes a year. The business runs at low single-digit net margins, so earnings depend heavily on volume and working capital. It has three distinguishing features: a recycling-based, low-carbon feedstock model; a strategic partnership with Japan's JFE Shoji, which owns 5.81% and acts as exclusive distributor for deox and wire rod; and a new specialty-alloys subsidiary (ATSAL) being developed with Japanese technical support. Revenue in FY2026 was INR 618 crore and net profit INR 15.5 crore (consolidated), against a market value of roughly 100x trailing earnings.
Company's own description
The CMOTS-maintained company record, which reproduces the company's annual report language, says Arfin manufactures, trades and sells non-ferrous metal products from facilities at Chhatral, Dhanot and Vadaswami in Gujarat. It cites installed capacity of 71,000 metric tonnes per annum and lists the main products as aluminium wire rod, aluminium deox, cored wire, aluminium alloy ingots, ferro titanium, and conductors and cables. It describes customers in the steel, automobile and power sectors, in India and overseas. The FY2022 Annual Report ("enVISION more") describes the company as consistently investing in products and technologies for rapid growth and as delivering customised products. The 2014 Annual Report called Arfin one of India's key manufacturers of aluminium wire rod and deox and among India's best-known aluminium recycling plants.
In its financial results Arfin reports a single operating segment: manufacturing and trading of ferrous and non-ferrous metals (NSE iXBRL Q2 FY2026; FY2026 audited results).
Independent characterisation
Arfin is best understood as a metal converter with a cost-plus, volume-driven model, not a commodity producer. It buys aluminium scrap (domestic and imported), primary ingot and ferro-alloy inputs. It melts, alloys, casts, rolls and draws them into intermediate products and sells at prices linked to LME/domestic aluminium benchmarks plus a conversion premium. Three economic features follow.
-
Thin margins. Gross margin is about 15–16% and EBITDA margin about 5–7%. Consolidated net margin was 1.5–2.5% across FY2022–FY2026 (Stockanalysis, consolidated). Small changes in conversion spread or interest cost move earnings sharply, which explains PAT up 69% in FY2026 on flat revenue.
-
Working-capital intensity. Inventory days were about 151 and the cash conversion cycle about 129 days in FY2026 (standalone ratios, Tapetide/Screener format). Growth is therefore funded largely by bank working-capital lines: cash credit of INR 82.7 crore plus overdraft rated by CRISIL.
-
Order-backed visibility. Since FY2023 the company has increasingly disclosed large, multi-month supply contracts: SABIC deox (INR 350 crore over four years), JFE Shoji (INR 180 crore and INR 300 crore), Diamond Power (INR 321 crore) and DGVCL (INR 85.59 crore). Revenue visibility is better than for a pure spot seller, but it is concentrated in a few counterparties.
Revenue model mix
| Revenue type | Estimated share | Comment |
|---|---|---|
| Product sales (manufactured) | Majority (exact % not publicly disclosed) | Deox, cored wire, alloy ingots, wire rod, conductors, ferro-titanium |
| Trading of metals | — | The reported segment explicitly includes "trading"; aggregators note the company "manufactures and trades" metals |
| Services / subscription / licensing | Nil | None disclosed |
| Export sales | Not publicly disclosed as a % | Exports confirmed (e.g., SABIC, Saudi Arabia, December 2022 order) |
Value-chain position
Arfin sits in the mid-stream of the aluminium value chain. Upstream it buys scrap and primary metal from recyclers, traders and primary producers (Hindalco, NALCO and Vedanta are the domestic primary suppliers of the industry). Downstream it supplies integrated steel mills, foundries and auto-component makers, and cable and conductor EPC contractors and distribution utilities. In conductors it is partly a supplier to larger cable and EPC companies (Diamond Power Infrastructure) and partly a direct supplier to state distribution utilities (Dakshin Gujarat Vij Company Ltd).
Customer types and end-markets
| End-market | Products | Named customers / channels (public) |
|---|---|---|
| Steel (deoxidation, ladle metallurgy, alloying) | Aluminium deox (notch bars, cubes, shots), cored wire, ferro-titanium | ArcelorMittal Nippon Steel India, JSW Steel, Tata Steel (Machinist.in); SABIC, Saudi Arabia (export); JFE Shoji India as exclusive distributor for deox and wire rod since 1 April 2024 |
| Automotive / foundry | Aluminium alloy ingots (secondary alloys such as ADC12/LM-series) | Auto-component foundries (names not disclosed) |
| Power transmission & distribution | Aluminium wire rod (EC grade/alloy), AAC/AAAC/ACSR conductors, MV covered conductors, EHV conductors (HTLS/ACSS/AL-59) under development | Diamond Power Infrastructure Ltd; Dakshin Gujarat Vij Company Ltd (Government of Gujarat) |
| Specialty alloys (new) | Titanium and specialty alloys via ATSAL | MoU with Toyo Denka Kogyo, JFE Shoji Corporation and JFE Shoji India (June 2026) |
Strategy
Stated strategic themes
Arfin does not publish a formal strategy document or hold investor days. Its annual reports and disclosures repeat four themes, paraphrased here.
-
Value-added diversification across three industrial end-markets. This means moving from basic recycled aluminium into higher-specification products for steel, automotive and power. The FY2022 Annual Report frames this as continuous investment in products and technologies for rapid growth.
-
Power T&D upgrading. Arfin is moving up the conductor ladder from AAC/AAAC/ACSR to MVCC and EHV conductors (HTLS/ACSS/AL-59), targeting the demand created by "large-scale transmission infrastructure projects" (January 2026 disclosure).
-
Strategic alignment with Japanese partners. JFE Shoji has been an equity investor and exclusive distributor since 2024. Toyo Denka Kogyo is now a technology partner for specialty alloys through ATSAL.
-
Sustainability through recycling and captive renewables. This covers scrap-based deox with lower embodied CO2 and solar plants to cut power costs.
Initiatives announced in the last 24 months (Oct 2024 – Oct 2026)
| Initiative | Date | Description | Targets / economics |
|---|---|---|---|
| ATSAL incorporation | 14 Jan 2025 | New 100% subsidiary for titanium and specialty alloys | Capital of INR 7.5 crore in rights equity (Mar 2026) plus initial capital |
| Solar power plants | Feb 2025 | Two captive solar plants including 1.2 MW in Gujarat | ≈INR 125 lakh a year in electricity savings |
| NSE direct listing | Approved 30 May 2025; listed 22 Jul 2025 | Wider investor access and liquidity, no fund-raise | — |
| Resumed dividends | Nov 2025; Sep 2026 | Interim INR 0.11 (FY2026) and INR 0.12 (FY2027) | Payout ≈12–14% of PAT |
| MVCC product line | 2,025 | Medium Voltage Covered Conductor in the Conductor & Cable Division | ≈INR 100 crore of additional revenue over three years (management) |
| EHV conductor entry | Jan 2026 | Rigid multi-stranding machine for HTLS/ACSS/AL-59 | Investment and capacity not disclosed |
| Double-wire RBD machine | 2,026 | High-capacity wire-drawing; trial production commenced | — |
| Ageing-cum-annealing furnace | 2025–2026 | Heat treatment for alloy wire and conductors; inaugurated with JFE Shoji | — |
| ATSAL–Toyo Denka–JFE Shoji MoU | 17 Jun 2026 | ATSAL to manufacture in India with Toyo Denka technical support; JFE Shoji handles distribution | One-year collaboration framework; no financial targets disclosed |
| Large supply contracts | Sep 2025 – Jun 2026 | JFE Shoji INR 180 crore and INR 300 crore; Diamond Power INR 321 crore; DGVCL INR 85.59 crore | ≈INR 886 crore in disclosed orders over about 12 months (analyst sum, values partly incl./excl. GST) |
Medium-term targets and guidance
Arfin has not published formal medium-term financial targets (revenue, margin or ROCE) in the sources retrieved. The only quantitative forward guidance found is the ≈INR 100 crore three-year incremental revenue from MVCC and the monthly run-rates implied by orders (≈INR 29 crore a month from Diamond Power; ≈INR 12 crore a month from DGVCL including GST, analyst calculation of 85.59/7).
Products & Services
Arfin's public material does not include detailed specifications or pricing. The catalog below combines the company's stated product lines with disclosed order details. Technical descriptions reflect standard industry definitions of these products and are not company-specific claims. Pricing in all lines is linked to aluminium prices (LME/domestic) plus a conversion premium, and orders are typically subject to price variation (e.g., the DGVCL order is "subject to variation in accordance with prevailing market rates").
Steel-sector consumables
Aluminium deoxidisers (deox). Aluminium is added to molten steel in the ladle to remove dissolved oxygen (killing) and control inclusions. Arfin makes deox in notch-bar, cube/shot and similar forms from recycled scrap, which uses less energy and emits less CO2 than primary metal (Argus, March 2024, citing JFE Shoji's rationale). Target customers are integrated steel producers in India (ArcelorMittal Nippon Steel India, JSW, Tata Steel) and the Middle East (SABIC). Capacity is 20,000 t/yr (2024). Flagship contracts are SABIC (18,000 MT, ≈INR 350 crore, from December 2022 over four years), an ≈INR 25.98 crore deox order for steel mills in the western zone, and the INR 300 crore / 7,400 MT JFE Shoji India order of June 2026. Since 1 April 2024 JFE Shoji India has been the exclusive distributor and agent for this line.
Cored wire. Steel sheaths filled with alloying or treatment powders (typically calcium-silicon, calcium-iron, carbon or ferro-alloys), injected into the ladle for inclusion modification and precise alloying. The mill was commissioned in March 2015. Product grades and capacity are not publicly disclosed. Target customers are secondary-metallurgy users at steel mills.
Ferro-titanium (ferro alloys). An alloy of iron and titanium used for deoxidation, nitrogen fixing and grain refinement in special steels and stainless steel. The plant was set up in FY2017. Volumes are not disclosed. This line is the technical basis for the new titanium and specialty-alloys subsidiary.
Automotive / foundry
Aluminium alloy ingots. Secondary aluminium casting alloys re-melted from sorted scrap, supplied to die-casters and foundries for auto components. Specific alloy grades are not publicly disclosed. Capacity is 21,000 t/yr after the second Dhanot plant (December 2020, +12,000 MTPA). Ingots were part of the INR 180 crore JFE Shoji India order (September 2025).
Aluminium cubes/shots. Small cast forms used as alloying additions or deox. Included in the September 2025 JFE Shoji order.
Power transmission & distribution
Aluminium wire rod. Continuously cast-and-rolled EC-grade or alloy rod used as feedstock for conductor and cable manufacturing. Capacity is 15,000 MTPA (2024). It is sold externally (e.g., a 500 MT order worth ≈INR 15.43 crore) and used captively for conductors. JFE Shoji India has been exclusive distributor since April 2024.
Bare overhead conductors (AAC / AAAC / ACSR / "aluminium sector conductor"). Stranded aluminium or aluminium-alloy conductors for transmission and distribution lines. The conductor plant was commissioned in FY2018. Flagship orders are Diamond Power Infrastructure (an initial 1,000 MT at ≈INR 29.2 crore, then a repeat 11,000 MT at ≈INR 321 crore for Jan–Nov 2026) and DGVCL (20,400 km of AAAC, ≈INR 85.59 crore incl. GST, May–Nov 2026).
Medium Voltage Covered Conductor (MVCC / PVC-covered conductor). A new line in the Conductor & Cable Division, which the company describes as a niche category. Management guided additional revenue of about INR 100 crore over three years (Capital Market via Enrichmoney). Target customers are distribution utilities seeking reliability and safety in vegetation-dense or urban corridors.
Extra High Voltage (EHV) conductors – HTLS / ACSS / AL-59 (under development). In January 2026 the board approved a rigid multi-stranding machine to enter the EHV conductor market, which is driven by large transmission projects. HTLS (high-temperature low-sag) and ACSS (aluminium conductor steel supported) carry more current on existing corridors; AL-59 is a high-conductivity aluminium alloy conductor. The investment amount and commissioning date are not publicly disclosed.
Double-wire RBD (rod breakdown) machine. A high-capacity drawing machine installed at the manufacturing facility in 2026. Trial production has begun and commercial production was expected shortly (Capital Market via Enrichmoney). It raises wire-drawing throughput for conductors.
Specialty alloys (ATSAL)
Titanium and specialty alloys. ATSAL proposes to make "Products and Trade Products" in India with technical support from Toyo Denka Kogyo. JFE Shoji entities would coordinate commercial distribution and the supply chain (MoU of June 2026, described as a one-year collaboration framework). Toyo Denka Kogyo's products are typically metal-hydride and ferro-alloy additives, but the specific products covered by the MoU are not publicly disclosed. Capacity and pricing are not disclosed.
Brand
Products are marketed under the "Arfin" brand (CRISIL rationale, June 2026). Arfin is a member of the Aluminium Association of India, the Bureau of International Recycling (BIR) and the Metal Recycling Association of India (MRAI).
Financial Narrative
Basis. Income-statement data are consolidated where available (Stockanalysis, from filings; FY2026 audited consolidated results). Balance-sheet, cash-flow and working-capital data come from the Screener/Tapetide-format dataset. For FY2026 that dataset is on a standalone basis (it shows FY2026 sales of INR 625 crore, matching standalone revenue of INR 624.9 crore, against consolidated INR 618.0 crore). Group and standalone balance sheets differ only marginally because ATSAL is small: the parent's investment in ATSAL was ≈INR 7.5 crore plus initial capital. Figures are in INR crore unless stated.
Income statement (consolidated)
Sources: revenue, gross profit, finance cost and net income from Stockanalysis (consolidated, INR million converted to crore). FY2026 PBT INR 2,370.63 lakh, PAT INR 1,545.13 lakh and EPS INR 0.92 from audited consolidated results (5paisa/FilingReader, May 2026); FY2025 PBT INR 1,437.93 lakh. EBITDA, depreciation and FY2022–FY2024 PBT from the Screener/Tapetide dataset (rounded). FY2026 EBITDA in that dataset is standalone (INR 43 crore); MarketsMojo reports consolidated FY2026 EBITDA growth of 27%, and ScanX reports +23.07%. Dividend for FY2026 is the interim of 11 November 2025.
Margin profile
Sources: gross margin is analyst calculation from Stockanalysis; EBITDA margin and tax rate from the Screener/Tapetide dataset; net margin from Stockanalysis.
Revenue CAGR FY2022–FY2026 (consolidated): ≈4.1% a year (analyst calculation: 618.0/526.1 over four years). The 10-year sales CAGR shown by Fyers is not meaningful because of base effects. The 5-year CAGR from FY2021 (INR 303 crore) is ≈15.3% (analyst calculation; FY2021 was a COVID-depressed base).
Commentary. Revenue has been range-bound at INR 526–618 crore for five years because realisations tracked aluminium prices and capacity was largely full. The margin story is better: EBITDA margin rose from 4.6% (FY2022) to 7.0% (FY2026) and reached a record 8.45% consolidated in Q4 FY2026 (MarketsMojo). Drivers were a richer mix of conductors and value-added wire and better absorption of fixed costs. Two lines held back earnings until FY2026. Finance cost rose from INR 10.4 crore to ≈INR 18–19 crore as working capital expanded, and the effective tax rate normalised from about 6% (FY2022–FY2023, likely due to brought-forward losses from FY2020) to about 36%. That explains why FY2025 net income barely moved despite 15% revenue growth. In FY2026, flat revenue combined with a higher EBITDA margin and slightly lower interest produced a 69% jump in PAT.
Quarterly trajectory (consolidated, INR crore)
Sources: Fyers; Business Standard (Q2); Kotak Neo (Q3); 5paisa/MarketsMojo (Q4); Sahi/Fyers/ScanX (Q1 FY2027). Q2 and Q3 margins are standalone OPM (Tapetide). Univest reported Q1 FY2027 revenue as "INR 240 crore" in one article; this appears to include GST or other income and is inconsistent with the filed INR 212.77 crore, which is used here.
Inflection. Quarterly revenue nearly doubled between Q1 FY2026 and Q1 FY2027 as the Diamond Power conductor contract (≈INR 29 crore a month from January 2026), the JFE Shoji supply contracts and the DGVCL order (from May 2026) ramped up. Q1 FY2027 margin fell to 4.77%, which points to a lower-margin mix (high-volume conductor or traded metal) and possibly aluminium price movements. Q1 FY2027 also had a low tax rate (PBT INR 4.64 crore, tax INR 0.57 crore).
Balance sheet (Screener/Tapetide-format dataset; FY2026 standalone basis)
Items not separately disclosed in available sources: cash and equivalents (net cash flow in the dataset is close to zero in most years, implying small balances); the exact short-term/long-term split of debt; goodwill and intangibles (none apparent, since the business is organic); and working capital in absolute terms.
Debt composition (rated bank facilities, CRISIL, July 2026). These are facility limits, not outstanding balances. Cash credit: YES Bank INR 39 crore, SBI INR 30 crore, Standard Chartered INR 13.7 crore. Overdraft: IDBI Bank INR 2 crore. Term loans: YES Bank INR 11 crore, Shinhan Bank INR 8 crore, SBI INR 1.81 crore, Standard Chartered INR 1.42 crore. Bank guarantee: SBI INR 4.5 crore. Total rated INR 129.21 crore. This implies the debt is predominantly short-term working-capital: about INR 85 crore of fund-based working-capital lines against about INR 22 crore of term loans.
Equity inflection FY2025. Equity rose by ≈INR 61 crore in FY2025. Most of this was the preferential issue to JFE Shoji India (9,798,432 shares × INR 53.58 ≈ INR 52.5 crore, analyst calculation), plus retained earnings. Debt/equity fell from about 1.25x to 0.75x as a result.
Cash flow (INR crore)
Sources: Screener/Tapetide dataset. Implied capex is analyst calculation (CFO minus FCF). FY2026 dividends paid is analyst calculation (INR 0.11 × 168.72 million shares, paid December 2025). FY2026 investing outflow includes ≈INR 7.5–8 crore of ATSAL equity, which nets out at group level, and capex on the RBD machine and furnace.
Commentary. Operating cash flow is erratic and depends on working capital. FY2025 CFO turned negative (−INR 21 crore) as inventory days rose to 130 and working-capital days to 66; the JFE Shoji equity infusion funded it (financing +INR 30 crore). FY2026 CFO recovered to INR 30 crore (CFO/EBITDA ≈76%) as debtor days fell to 19. Capex remains modest at INR 3–11 crore a year, roughly 1–2% of revenue. That is consistent with a converter that adds equipment rather than greenfield plants. The proposed EHV line and ATSAL scale-up are the main capex unknowns.
Ratios
Sources: ROCE and working-capital days from the Screener/Tapetide dataset. ROE, ROA, D/E, net debt/EBITDA, interest coverage and asset turnover are analyst calculations from the tables above (ROE on average equity; net debt approximated by gross borrowings because cash is not disclosed and appears minimal). ROIC is not computed separately; ROCE of ≈14% pre-tax is the closest proxy, implying after-tax ROIC of about 9–10%. Current ratio is not publicly disclosed in the sources retrieved. Simply Wall St flags the company as "taking some risk with its debt," and Screener flags a "low interest coverage ratio."
Trend synthesis. Leverage has improved structurally, mainly because of the 2024 equity raise. Return metrics, however, remain mediocre: ROE of 7–10% and ROCE of about 14%, on a three-year average ROE of 8.1% (Tapetide). The working-capital trend is the most important negative. Inventory days rose from 84 to 151 between FY2022 and FY2026, which partly offsets the gain from faster debtor collection (51 to 19 days, likely helped by JFE Shoji acting as distributor). For a company at 9–10x book value, this capital-intensity profile is the key inconsistency with its valuation.
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansFinancial Detail
Segment Overview
| Segment | Contents | Products |
|---|---|---|
Ferrous & non-ferrous metals (single segment) | All manufacturing and trading operations of Arfin India Ltd and ATSAL | Aluminium deox, cored wire, ferro-titanium, aluminium alloy ingots, aluminium wire rod, conductors and cables, aluminium cubes/shots, specialty alloys (ATSAL, early stage) |
Revenue by Segment and Segment Margins & Growth (%)
| Metric | FY2024 | FY2025 | FY2026 |
|---|---|---|---|
Segment revenue – consolidated (INR Cr) | 535.2 | 615.8 | 618.0 |
Segment YoY growth (%) | -1.6 | 15.1 | 0.4 |
Contribution to total revenue (%) | 100 | 100 | 100 |
Product Division Details
| Product division | Primary plant(s) | Capacity disclosed | Key end-market |
|---|---|---|---|
Aluminium deoxidisers | Chhatral | 20,000 t/yr (Argus, March 2024) | Steel |
Aluminium alloy ingots | Chhatral and Dhanot (second plant Dec 2020, +12,000 MTPA) | 21,000 t/yr (Argus, March 2024) | Automotive/foundry |
Aluminium wire rod | Chhatral | 15,000 MTPA (2024) | Power/cables, captive conductor feed |
Cored wire | Chhatral (mill commissioned March 2015) | — | Steel |
Ferro-titanium / ferro alloys | Plant set up FY2017 (site not specified) | — | Steel |
Conductors & cables (AAC/AAAC/ACSR, MVCC; EHV planned) | Conductor plant commissioned FY2018; double-wire rod breakdown (RBD) machine added 2026 | — | Power T&D |
Specialty alloys (ATSAL) | Chhatral, Gandhinagar (ATSAL registered office) | Not disclosed; operations had not started in FY2025 | Advanced industrial applications |
Total group | — | 71,000 MTPA | — |
“—” = not publicly disclosed.
Group Entities
| Entity | Relationship | Status | Source |
|---|---|---|---|
Arfin India Limited | Listed parent | Operating | — |
Arfin Titanium & Speciality Alloys Limited (ATSAL) | 100% subsidiary; incorporated 14 Jan 2025; registered at Billeshwarpura, Chhatral, Kalol, Gandhinagar | Operations had not commenced in FY2025; INR 7.5 crore of rights equity subscribed in March 2026; MoU with Toyo Denka/JFE Shoji June 2026 | FY2025 Directors' Report; NSE filings |
Krish Ferro Industries Private Limited | Group (promoter) company, not a subsidiary | Related party | FY2025 Directors' Report |
Income Statement and Margin Analysis (%)
| Metric | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|---|
Revenue from operations (INR Cr) | 526.1 | 544.1 | 535.2 | 615.8 | 618.0 |
Revenue growth YoY (%) | 73.4 | 3.4 | -1.6 | 15.1 | 0.4 |
Gross profit (INR Cr) | 81.3 | 79.8 | 88.9 | 99.0 | 96.3 |
EBITDA / operating profit (INR Cr) | 24 | 26 | 30 | 36 | 43 |
Depreciation (INR Cr) | 3 | 4 | 4 | 4 | 5 |
Finance cost (INR Cr) | 10.4 | 12.5 | 17.2 | 18.4 | 18.7 |
Pre-tax income (INR Cr) | 10 | 11 | 10 | 14.4 | 23.7 |
Net income (INR Cr) | 9.2 | 10.3 | 8.2 | 9.1 | 15.5 |
EPS basic and diluted (INR) | 0.58 | 0.65 | 0.52 | 0.54 | 0.92 |
Dividend per share (INR) | 0 | 0 | 0 | 0 | 0.11 |
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansMargin Analysis (%)
| Metric | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|---|
Gross margin (%) | 15.5 | 14.7 | 16.6 | 16.1 | 15.6 |
EBITDA margin (%) | 4.6 | 4.9 | 6.0 | 6.0 | 7.0 |
Net margin (%) | 1.75 | 1.90 | 1.54 | 1.49 | 2.50 |
Effective tax rate (%) | 6 | 6 | 15 | 36 | 36 |
Income Statement and Per-Share Data
| Metric | Q1FY2026 | Q2FY2026 | Q3FY2026 | Q4FY2026 | Q1FY2027 |
|---|---|---|---|---|---|
Revenue from operations (INR Cr) | 108.86 | 127.94 | 187.96 | 193.24 | 212.77 |
Net profit (INR Cr) | 1.08 | 2.45 | 5.09 | 6.82 | 4.07 |
EPS (INR) | 0.06 | 0.15 | 0.30 | 0.40 | 0.24 |
Operating margin excl. other income (%) | 6.06 | 6.9 | 6.9 | 8.45 | 4.77 |
Balance Sheet
| Metric | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|---|
Total assets (INR Cr) | 247 | 267 | 285 | 344 | 369 |
Net fixed assets (INR Cr) | 62 | 65 | 66 | 64 | 74 |
Capital work-in-progress (INR Cr) | 0 | 1 | 0 | 4 | 0 |
Investments (INR Cr) | 0 | 0 | 0 | 0 | 8 |
Total borrowings (INR Cr) | 112 | 112 | 120 | 117 | 129 |
Shareholders' equity (INR Cr) | 78 | 88 | 96 | 157 | 169 |
Equity share capital (INR Cr) | 16 | 16 | 16 | 17 | 17 |
Other liabilities incl. payables (INR Cr) | 58 | 67 | 69 | 71 | 71 |
Cash Flow
| Metric | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|---|
Cash from operations (INR Cr) | 11 | 29 | 5 | -21 | 30 |
Cash from investing (INR Cr) | -3 | -8 | -4 | -9 | -22 |
Cash from financing (INR Cr) | -8 | -14 | -8 | 30 | -8 |
Free cash flow (INR Cr) | 8 | 21 | 1 | -27 | 19 |
Implied capex (INR Cr) | 3 | 8 | 4 | 6 | 11 |
Dividends paid (INR Cr) | 0 | 0 | 0 | 0 | 1.9 |
Share buybacks (INR Cr) | 0 | 0 | 0 | 0 | 0 |
Returns & Leverage Ratios (%) and Financial Ratios (x)
| Metric | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|---|
ROE (%) | 12.6 | 12.4 | 8.9 | 7.2 | 9.5 |
ROA (%) | 3.7 | 3.9 | 2.9 | 2.7 | 4.2 |
ROCE (%) | 12 | 13 | 14 | 14 | 14 |
Debt to equity (x) | 1.44 | 1.27 | 1.25 | 0.75 | 0.76 |
Net debt to EBITDA (x) | 4.7 | 4.3 | 4.0 | 3.3 | 3.0 |
Interest coverage EBITDA/interest (x) | 2.3 | 2.1 | 1.7 | 2.0 | 2.3 |
Asset turnover (x) | 2.13 | 2.04 | 1.88 | 1.79 | 1.67 |
Debtor days | 51 | 38 | 36 | 31 | 19 |
Inventory days | 84 | 89 | 124 | 130 | 151 |
Payable days | 44 | 49 | 55 | 45 | 42 |
Cash conversion cycle (days) | 91 | 78 | 105 | 116 | 129 |
Region Overview
| Region | Evidence of activity |
|---|---|
India – Western zone (Gujarat, Maharashtra) | Plants in Gandhinagar; DGVCL (South Gujarat) AAAC order; deox for western-zone steel mills; Diamond Power (Vadodara-based) |
India – other states | Supplies to AM/NS India (Hazira, Gujarat), JSW (Karnataka/Maharashtra), Tata Steel (Jharkhand/Odisha) |
Middle East (Saudi Arabia) | SABIC export order, 18,000 MT of deox over four years from December 2022 (≈INR 350 crore, ≈INR 87 crore a year if evenly phased; analyst calculation) |
ASEAN | JFE Shoji stated it intends to sell Arfin's recycled deox in India and ASEAN (Argus, March 2024) |
Japan | JFE Shoji said it did not plan to import deox into Japan; Toyo Denka MoU is about manufacturing in India |
Valuation Snapshot
| Metric | Value | Source |
|---|---|---|
Price (19 Oct 2026) | INR 100.61 (NSE) | Tapetide |
Market cap | INR 1,697.5 crore | Tapetide |
52-week high / low | INR 113.83 / 50.11 | Tapetide |
1-year return | ≈ +84% (analyst calculation: INR 54.80 close at end-Oct 2025 to INR 100.61). Anand Rathi reported +93.8% as of 7 Oct 2026. | Arihant monthly prices; Anand Rathi |
3-year return | ≈ +141% | Anand Rathi (7 Oct 2026) |
5-year return | The split-adjusted 52-week low was INR 7.42 on 20 Dec 2021, which implies a gain of more than 10x from late-2021 levels | Business Today (Dec 2022) |
Beta | ≈0.4 (low correlation with the market) | Equentis |
Average weekly volatility | 6.4% | Simply Wall St |
Capital Markets Data (INR) and Market Valuation
| Metric | Jun2025 | Jul2025 | Aug2025 | Sep2025 | Oct2025 | Nov2025 | Dec2025 | Jan2026 | Feb2026 | Mar2026 |
|---|---|---|---|---|---|---|---|---|---|---|
Month-end close (INR) | 26.00 | 34.09 | 32.90 | 47.59 | 54.80 | 57.46 | 73.32 | 74.94 | 71.79 | 72.91 |
Month-end market cap (INR Cr) | 438.68 | 575.17 | 555.10 | 802.95 | 924.60 | 969.48 | 1,237.07 | 1,264.41 | 1,211.26 | 1,230.16 |
Valuation Multiples
| Multiple | Arfin India | Basis |
|---|---|---|
P/E (TTM) | 104.8x standalone EPS of INR 0.96 (Tapetide); ≈92x consolidated TTM EPS of INR 1.09 (analyst calculation: TTM PAT 15.45 + 4.07 − 1.08 = INR 18.44 crore) | Tapetide; analyst calculation |
P/B | 9.96x (book value INR 10.1/share) | Tapetide |
EV/EBITDA | ≈39x (EV ≈ INR 1,697.5 crore market cap + ≈INR 129 crore debt = ≈INR 1,827 crore; TTM EBITDA INR 47.1 crore) | Analyst calculation; Tapetide EBITDA |
EV/Sales | ≈2.5x on ≈INR 722 crore consolidated TTM revenue (analyst calculation: 618.0 + 212.77 − 108.86) | Analyst calculation |
Dividend yield | ≈0.12% | Tapetide |
Margin Analysis (%) (FY2016–FY2027)
| Metric | FY2016 | FY2017 | FY2018 | FY2019 | FY2020 | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 | FY2027 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Dividend rate on face value (%) | 15 | 20 | 20 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 11 | 12 |
Credit Ratings
| Agency | Rating | Outlook | Date | Facilities |
|---|---|---|---|---|
CRISIL | BBB (long-term) / A3+ (short-term) | Stable | Reaffirmed 26 Jun 2026; updated letter 29 Jul 2026 | INR 129.21 crore |
CARE Ratings | Previously rated (2022–2024) | — | Last update 21 Oct 2024 | — |
Moody's / S&P / Fitch | Not rated | — | — | — |
Analyst Conclusions
Management guidance and consensus
There is no formal revenue or earnings guidance and no sell-side consensus. Disclosed forward indicators are the contract run-rates (≈INR 29 crore a month from Diamond Power to November 2026; ≈INR 12 crore a month including GST from DGVCL, May–November 2026; and the INR 300 crore JFE deox order), MVCC revenue guidance of ≈INR 100 crore over three years, and the EHV and ATSAL initiatives. Q2 FY2027 results are expected in late October or November 2026; the trading window closed on 28 September 2026.
Bull case
-
Structural rerating from converter to engineered-products company. If EHV (HTLS/ACSS/AL-59) and MVCC conductors scale, mix could lift EBITDA margin sustainably above the FY2026 level of 7.0%. The Q4 FY2026 margin of 8.45% shows what is achievable.
-
The Japanese ecosystem deepens. JFE Shoji's equity, exclusive distribution and INR 480 crore of orders in nine months, plus Toyo Denka's technology for ATSAL, could make Arfin JFE's India platform for recycled steel additives and specialty alloys, with ASEAN exports as an option.
-
Operating leverage on a stronger balance sheet. Revenue grew 95% YoY in Q1 FY2027 while debt/equity is now 0.76x, down from 1.44x. A sustained INR 200 crore-plus quarterly run-rate implies annual revenue above INR 800 crore. Even at 5–6% EBITDA margins, interest coverage would improve and earnings growth would compound.
Bear case
-
Valuation leaves no margin of safety. At ≈92–105x P/E, ≈10x book and ≈39x EV/EBITDA, against an 8.1% three-year average ROE and 14% ROCE, the stock prices in years of flawless execution. Peers trade at 10–55x earnings.
-
Order cliff and concentration. The largest disclosed orders (Diamond Power INR 321 crore, DGVCL INR 85.59 crore, JFE INR 300 crore) are scheduled to finish between September and November 2026. Without visible renewals, H2 FY2027 revenue could fall back towards the INR 130–190 crore quarterly range of FY2026.
-
Low-quality growth and working-capital drag. Q1 FY2027 OPM fell to 4.77% (from 6.06%) despite record revenue, and inventory days rose to 151. Growth is consuming capital at thin margins, and a sharp move in aluminium prices could reverse earnings quickly, as FY2020's INR 22 crore loss showed.
Catalysts and monitorables (next 12 months)
| Catalyst / monitorable | Timing | What to watch |
|---|---|---|
| Q2 FY2027 results | Oct–Nov 2026 | Whether revenue holds above INR 200 crore; OPM recovery toward 6–7%; interest cost; tax rate |
| Interim dividend payment (INR 0.12) | By Oct 2026 | Dividend continuity |
| Renewal or replacement of Diamond Power, DGVCL and JFE orders | Q3–Q4 FY2027 | New Regulation 30 order disclosures |
| EHV conductor line commissioning and customer qualification | FY2027 | Disclosure of capacity, capex and first EHV orders |
| ATSAL commercial production; conversion of the Toyo Denka MoU into a definitive agreement | Within the MoU's one-year term (by Jun 2027) | Any JV equity, capex or product disclosure |
| Working capital | Each quarter | Inventory and debtor days; CFO versus EBITDA |
| CRISIL annual review | Mid-2027 | Upgrade path to BBB+ if leverage and coverage improve |
| Shareholding | Quarterly | JFE Shoji stake changes; institutional entry; promoter moves after the September 2026 family consolidation |
| FY2026 Annual Report details | Already filed | Product-wise volumes, export share, managerial remuneration, related-party transactions |
Analyst verdict
Arfin India has moved from a sleepy BSE-only recycler, trading near INR 23 in June 2025, to a ≈INR 1,700 crore NSE-listed company. The rerating rests on three real changes. First, a credible Japanese strategic partner, JFE Shoji, has put equity, distribution and large orders behind the business. Second, there is a visible push up the power-conductor value chain into MVCC and EHV. Third, profitability has improved: FY2026 consolidated PAT rose 69% to INR 15.45 crore and quarterly revenue reached INR 212.77 crore in Q1 FY2027. The balance sheet is also healthier than at any point in the past decade, with debt/equity at 0.76x and CRISIL BBB/Stable.
The financial profile underneath, however, is still that of a working-capital-heavy metal converter. Net margins are 1.5–2.5%, inventory days are about 150, interest coverage is about 2x, and ROE has not exceeded about 12.6% in five years. Revenue was essentially flat between FY2025 and FY2026; the step-up since late 2025 comes from a handful of concentrated contracts, most of which finish by November 2026. Q1 FY2027 also showed that higher volume can come with lower margin.
At roughly 90–105x trailing earnings and 10x book, the market is valuing Arfin less on what it is than on what EHV conductors and the ATSAL–Toyo Denka specialty-alloys venture might become. Neither has yet produced disclosed revenue, capex budgets or customer qualifications. For investors, the next two or three quarters are decisive. Sustained quarterly revenue above INR 200 crore, EBITDA margin back at 7% or more, new multi-quarter orders replacing the November 2026 expiries, and a concrete ATSAL business plan would justify a premium, though probably not the current one. Absent that evidence, the risk-reward is skewed to the downside.
Overall assessment: an improving, strategically well-connected small-cap industrial whose execution is promising but whose valuation has moved well ahead of its demonstrated economics. Monitor closely; position size should reflect high volatility (6.4% average weekly moves) and concentration risk.
Key sources consulted
BSE/NSE corporate filings (financial results Q1 FY2026–Q1 FY2027; Reg. 30 disclosures dated 18 Sep 2025, 29 Dec 2025, Jan 2026, 14 and 25 Mar 2026, 30 Mar 2026, 17 and 19 Jun 2026, 31 Aug 2026, 18 Sep 2026; AGM notice of 20 Aug 2026; credit rating letters of 29 Jun and 31 Jul 2026; NSE iXBRL integrated filings); FY2025 Directors' Report (33rd Annual Report); FY2022 Annual Report; 2014 Annual Report; CRISIL rating rationale (26 Jun 2026); CMOTS company records (via Arihant Capital, IIFL, Aditya Birla Capital); Stockanalysis.com (consolidated income statement); Tapetide/Screener-format financial dataset; MarketsMojo; Fyers; Business Standard/Capital Market; Reuters briefs (via Zerodha); FilingReader; ScanX; Argus Media (18 Mar 2024); Machinist.in; Wire & Cable India; Business Today (Dec 2022); HDFC Sky; MoneyWorks4Me; Sahi; Univest; Simply Wall St; Anand Rathi; DivvyDiary; Equitymaster; Choice India; Upstox.
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansExecutive Leadership
Board of Directors
| Name | Role | Category | Tenure / notes | Source |
|---|---|---|---|---|
Mahendrakumar Rikhavchand Shah | Chairman & Whole-time Director (listed by Tapetide as CEO) | Promoter, Executive | Founder-promoter; holds 20.96% after the September 2026 inter-se transfer (15.19% before); signs key Regulation 30 disclosures | CMOTS; FilingReader; ScanX |
Jatin Mahendrakumar Shah | Managing Director | Promoter, Executive | Son of the Chairman; Managing Director per CMOTS (2025); listed as company lead by Simply Wall St | CMOTS; Simply Wall St |
Pushpa Mahendra Shah | Executive Director | Promoter, Executive (woman director) | Spouse of the Chairman (relationship inferred from the shared name "Mahendra"; not formally verified) | CMOTS |
Mukesh Kumar Chowdhary | Independent Non-Executive Director | Independent | — | CMOTS |
Tarachand R. Jain (DIN 01248594) | Independent Non-Executive Director | Independent | Appointed Additional Independent Director when Jitendra Shah (DIN 08781998) stepped down | BSE filing |
Rucheeta (Ruchita) Rahulkumar Nahata (DIN 11020772) | Independent Non-Executive Director | Independent (woman) | Appointed 10 Apr 2025 for a term to 10 Apr 2030 | FilingReader |
Hardik S. Hundia | Independent Non-Executive Director | Independent | — | Choice India |
Natanya Kasaudhan | Company Secretary & Compliance Officer | KMP | — | Choice India |
Chief Financial Officer | Name not publicly disclosed in the sources retrieved | KMP | — | — |
Board & Management Changes
| Date | Change | Context |
|---|---|---|
| — | Jitendra Shankerlal Shah (Independent Director) resigned; Tarachand Jain appointed Additional Independent Director | BSE filing |
10 Apr 2025 | Rucheeta Nahata appointed Additional Independent Director; committees reconstituted | FilingReader |
2 Dec 2025 (reported 8 Jan 2026) | Chairman sold 29,626 shares on market (≈0.018%) at about INR 58.85 | Fyers insider-trading record; ScanX |
7 Sep 2026 onward | Inter-se gift of 9,747,250 shares (5.77%) from Pooja Mahendrabhai Shah (8,024,400) and Khushbu Mahendrabhai Shah (1,722,850) to the Chairman; promoter-group total unchanged | FilingReader; Fyers SAST record |
Shareholding Trend
| Holder category | Sep 2025 | Dec 2025 | Mar 2026 | Jun 2026 | Sep 2026 |
|---|---|---|---|---|---|
Promoter & promoter group (%) | 69.79 | 69.77 | 69.77 | 69.77 | 69.77 |
Foreign institutional investors (%) | 2.64 | 2.68 | 1.54 | 0.79 | 0.60 |
Domestic institutions incl. mutual funds (%) | 0 | 0 | 0 | 0 | 0 |
Government (%) | 0.04 | 0.04 | 0.04 | 0.04 | 0.04 |
Public – individuals (%) | 16.86 | 16.83 | 15.71 | 15.59 | 15.32 |
Others incl. bodies corporate and JFE Shoji (%) | 10.67 | 10.69 | 12.93 | 13.80 | 14.27 |
Number of shareholders | 9,868 | 11,014 | 11,976 | 13,548 | 13,608 |
Major Shareholders
| Rank | Holder | Shares | Stake (%) | Category | Source |
|---|---|---|---|---|---|
| 1 | Mahendrakumar Rikhavchand Shah | 35,375,874 (after transfer; analyst calculation 25,628,624 + 9,747,250) | 20.96 | Promoter | FilingReader; shareholding 31 Mar 2026 |
| 2 | JFE Shoji India Private Limited | 9,798,432 | 5.81 | Public (strategic, non-promoter) | Shareholding pattern 31 Dec 2025 and 31 Mar 2026 |
3–10 | Other promoter-group members (Jatin Shah, Pushpa Shah and others; 10 promoter entities in total) and public holders above 1% | — | Promoter group total 69.77% | Promoter | Shareholding 31 Mar 2026 |
Competitive Landscape
Competitors by Segment
| Product line | Named competitors (India unless stated) | Arfin's relative position |
|---|---|---|
Aluminium deox / steel additives | Captive deox units at steel majors; MMP Industries (aluminium paste/powder and deox); Baheti Recycling Industries; Jainik Industries; Rajasthan- and Gujarat-based private recyclers; imports | Mid-sized and well certified with large integrated mills (AM/NS, JSW, Tata); JFE Shoji distribution is a differentiator |
Cored wire | Private specialists (e.g., Minex Metallurgical, OCL-linked units, regional suppliers); not easily benchmarked | Small, bundled with deox offering |
Ferro-titanium | Imports; small specialty producers | Niche |
Secondary aluminium alloy ingots | Baheti Recycling, Jainik Industries, Century Extrusions (downstream), many unorganised recyclers; Hindalco (primary/alloys) | Fragmented market; Arfin is among organised mid-tier players |
Aluminium wire rod | Vedanta, NALCO, Hindalco (primary rod mills); Manaksia Aluminium; Maan Aluminium (trader/extruder) | Small next to primary producers' rod mills; mostly regional and captive |
Bare overhead conductors (AAC/AAAC/ACSR, AL-59) | APAR Industries, Diamond Power Infrastructure, Gupta Power, Cords Cable, KEI Industries (cables), Sterlite Electric | Sub-scale; growing through Diamond Power's volume and state utility orders |
HTLS/ACSS/EHV conductors (planned) | APAR Industries (leader), Sterlite Electric, KEC/others | New entrant without a track record |
Specialty alloys (ATSAL) | Imports; Japanese and European specialists | Pre-revenue |
Peer Comparison FY2027
| Company | Market cap (INR Cr) | P/E (x) | EV/EBITDA (x) | Annual PAT (INR Cr) |
|---|---|---|---|---|
Vedanta Aluminium-linked listed entity (VAML) | 170,356 | 11.87 | — | — |
National Aluminium Co. (NALCO) | 68,598 | 10.16 | 40.84 (as shown; likely data error) | 5,797 |
Arfin India | 1,502 | 81.45 | 41.38 | 15 |
MMP Industries | 1,006 | 20.07 | 24.32 | 31 |
Baheti Recycling Industries | 887 | 32.79 | 28.81 | 27 |
Maan Aluminium | 730 | 54.5 | 23.51 | 13 |
Eurobond Industries | 368 | 13.91 | 14.58 | 27 |
Jainik Industries | 293 | 20.93 | 10.47 | 14 |
Manaksia Aluminium | 245 | 27.66 | 2.88 (as shown) | 8 |
Century Extrusions | 171 | 13.82 | 2.39 (as shown) | 11 |
Peer Comparison FY2026
| Metric | Arfin India | MMP Industries | Baheti Recycling | Maan Aluminium |
|---|---|---|---|---|
Market cap (INR Cr, Fyers snapshot) | 1,502 | 1,006 | 887 | 730 |
PAT (INR Cr) | 15 | 31 | 27 | 13 |
P/E (x) | 81.45 | 20.07 | 32.79 | 54.5 |
Revenue, growth, margin, R&D intensity | Rev INR 618 crore; +0.4% FY2026; EBITDA ≈7%; R&D not disclosed | — | — | — |



