Capral Limited Overview
Capral Limited is Australia's largest aluminium extruder and distributor. It is a 90-year-old domestic manufacturer that converts primary aluminium billet into extruded profiles, finished building systems and distributed rolled products. It runs eight extrusion presses across six plants in Queensland, New South Wales, Victoria, South Australia and Western Australia, supported by a national network of distribution centres and Aluminium Trade Centres.
Revenue of A$686m in FY2025 came from about 65,000 tonnes, sold through two channels (direct mill sales and distribution) into three sectors: residential, commercial and industrial. The model passes LME-linked metal costs through to customers. Profitability therefore rests on conversion margin, plant utilisation and mix, not on the metal price itself.
Since a 2019 restructure, Capral has reset its cost base and earned A$34–41m of underlying EBIT a year through a weak housing cycle. It holds net cash and returns capital mainly through buy-backs. Its key exposures are Australian residential construction, import competition (mitigated by anti-dumping duties), and billet supply and LME volatility.
Company's own description
In every recent release, Capral describes itself as "Australia's largest extruder and distributor of aluminium products." The 1H26 presentation adds that it is "Australia's leading supplier of aluminium extrusion and rolled products." The statutory principal activity is "the manufacturing and distribution of fabricated and semi-fabricated aluminium related products" (FY2024 Directors' Report).
The segment note (1H26 Appendix 4D, Note 4) says Capral "produces a wide range of extruded aluminium products and systems. It distributes those manufactured products in addition to a small number of bought-in products through two distribution channels." It supplies three market sectors through each channel:
Residential: aluminium and other components for windows and doors, showers and wardrobes, and security products.
Commercial: aluminium and other components for windows and doors, internal fit-outs and other commercial building products.
Industrial: aluminium extrusions and rolled products for industrial uses.
Business model and value-chain position
| Revenue line | FY2023 (AUD Mn) | FY2024 (AUD Mn) |
|---|---|---|
| Sales of goods | 614.8 | 604.4 |
| Scrap and other revenue | 42.0 | 45.3 |
Capral sits in the midstream of the aluminium value chain. It buys primary aluminium billet from domestic and offshore smelters. Historically this has included Australian smelters (Tomago and Rio Tinto's Boyne smelter are referenced in scrap and recycling arrangements) and Middle Eastern smelters. Capral then extrudes the billet into profiles, and adds value through:
-
powder coating (including a paint line commissioned at Huntingwood NSW in Q1 2023, Capral's first powder-coating capability in NSW);
-
anodising;
-
cutting, punching and CNC machining.
It also distributes imported rolled products (sheet, plate and treadplate) that it does not manufacture. Downstream customers include window and door fabricators, commercial glaziers, builders, resellers and distributors, and industrial fabricators in transport, marine, infrastructure, defence and general manufacturing.
Channel mix: Direct mill sales were 52% of volume in the twelve months to June 2026 (1H26 presentation). The remaining 48% runs through Capral's distribution network, which includes Aluminium Trade Centres serving trade and small-fabricator customers.
Revenue model: Almost all revenue is product revenue, recognised at a point in time (FY2024 Note 3). There is no subscription or licensing income of significance. Revenue splits into:
Scrap revenue is material, at about 7% of revenue. Other income comprises sub-lease rentals (A$3.7m in FY2024) and interest.
Pricing mechanics: Selling prices are linked to the London Metal Exchange (LME) aluminium price and to regional premiums. Higher metal prices inflate revenue and working capital without necessarily lifting margin. Examples:
-
FY2022 revenue rose 17% while volume fell 6%.
-
FY2025 revenue rose 6% while volume fell 4%.
Capral's internal STIP metric, "Trading EBITDA," explicitly strips out "the volatility of global aluminium prices" (FY2024 Remuneration Report). This confirms that management treats metal as pass-through and conversion margin as the controllable driver.
Customer types and end-markets
Residential: about 40% of volume (FY2024 Chairman's Report). Customers are major window fabricators, resellers and builders. Demand lags dwelling commencements by about two quarters (1H26 presentation).
Commercial: commercial glazing systems (AGS Commercial, Narrowline, curtain wall), internal fit-outs, and partition systems (QRK, via Comsupply).
Industrial: marine (strong in 1H26), transport (trailers, tippers and tankers; Freighter Group is cited as a 20-year customer), infrastructure and energy (substations for Project EnergyConnect via PLP Australia), solar framing (Tindo Solar), data centres (an emerging opportunity in 1H26), defence and general fabrication.
Customer concentration: No customer exceeded 10% of revenue in 1H26 or 1H25 (1H26 Note 4).
Independent characterisation
Capral is a domestically protected, cyclically exposed, metal pass-through converter. It has unusually strong balance-sheet discipline for its size. The investment case rests on four factors:
-
Scale: it is the dominant domestic extruder, with national logistics.
-
Trade defence: anti-dumping measures on Chinese extrusions were extended for five years from October 2025, and measures on Malaysian and Vietnamese exports run until 2028.
-
Operating leverage: a permanently lowered post-2019 cost base gives leverage to a housing recovery.
-
Tax-advantaged capital returns: carried-forward tax losses mean statutory profit currently attracts no cash tax.
Earnings quality has been steady but structurally capped. Underlying EBIT has stayed in a A$34–41m band for five years while volume fell from 76,300 tonnes (FY2021) to 65,000 tonnes (FY2025). This shows margin and mix management offsetting volume loss, but no secular growth. The distribution-channel acquisition program, the low-carbon LocAl® brand and ASI certification are the main levers for differentiation.
Strategy
Stated corporate strategy (verbatim themes)
FY2022–FY2024 annual reports:
-
"Build on our strengths — product offer, scale, capability, and our people"
-
"Optimise what we do — continuous improvement in all aspects of our business"
-
"Grow for the future — develop innovative products, enhance our capability, expand our footprint"
2026 AGM (refreshed wording):
-
"Leveraging existing strengths in product range, scale, capability and people"
-
"Driving continuous improvement across operations"
-
"Investing selectively to support future growth and capability"
2H26 operating priorities (1H26 release): growth in the distribution channel, pricing management, cost control, and continued investment in extrusion-plant productivity.
Capital allocation priorities (2026 AGM): a balance between investment in operations and organic growth, growth through acquisitions, and "sustainable and consistent distributions through the cycle."
Strategic initiatives — last 24 months (Oct 2024 – Oct 2026)
| Initiative | Category | Timing | Details / targets |
|---|---|---|---|
| Penrith plant upgrade, stage 2 | Productivity capex | Completed 2025 | New billet furnace and saw "delivering productivity gains" |
| Smithfield equipment upgrades | Reliability capex | 2025–2026 | Improve reliability and productivity |
| FY2025 capex program | Investment | FY2025 | A$11.8m on plant reliability, automation and productivity |
| Distribution channel expansion | Growth / M&A | 2024–2026 | Integration of ATC (VIC) and Apple (QLD); Comsupply (WA) and Sydney bolt-on (2025); Geelong greenfield (2026) |
| Building Systems growth | Product / specification | 2025–2026 | New product ranges; national roll-out of QRK partitions; healthy commercial pipeline |
| Data centre and energy infrastructure | New end-markets | 2,026 | Data centres "emerging as a growth opportunity"; Project EnergyConnect substations; Tindo Solar frames |
| LocAl® low-carbon aluminium | ESG / product | Ongoing | EPDs now in place for LocAl and LocAl-SG (2026); LocAl volume up about 4x in 2024; demand "continued to increase" in 2025 |
| ASI certification | ESG | Maintained 2023–2026 | Only ASI-certified extruder in Australia (company claim) |
| Scrap recycling into billet | Circularity | Trials 2024 onward | Mill scrap remelt trial via Rio Tinto Boyne; Tomago scrap agreement (550 tpa) since 2022 |
| Emissions reduction | ESG target | To 2030 / 2050 | Scope 1+2 down 20% by 2030 versus 2022 baseline; net zero by 2050 |
| Climate reporting (AASB S2) | Compliance | FY2025 | First mandatory climate-related disclosure approved |
| Fair-trade advocacy | Regulatory strategy | Ongoing | China measures extended 5 years from Oct 2025; pushing to strengthen the anti-dumping system |
| Australian Made campaign | Marketing | 2,026 | Licensee of the Australian Made logo for extruded products |
| Middle East supply response | Supply chain resilience | 2,026 | Billet supply diversified away from Gulf smelters; freight and metal cost recovery |
| Capital allocation reset | Capital management | May 2026 | Distribution target revised from 40–80% to 40–60% of statutory NPAT |
| On-market buy-back | Capital management | 2 Mar 2026 onward | Up to 10% of issued shares (1,617,000); 307,173 bought in 1H26 at an average A$11.77 |
Medium-term targets and guidance
FY2026 earnings guidance: "broadly in line with the prior year depending on some recovery of the residential housing market" (24 Aug 2026).
No medium-term revenue, margin or EBIT targets are published: - Distribution policy: 40–60% of annual statutory NPAT, primarily via buy-backs, supplemented by unfranked dividends while tax losses remain.
Environmental: 20% reduction in Scope 1+2 emissions by 2030 (2022 baseline); net zero Scope 1+2 by 2050.
Products & Services
Capral does not publish product-level revenue, launch years for most systems, or list prices. Pricing is generally LME-linked plus conversion and finishing charges, negotiated by account; no list pricing is publicly disclosed. The catalogue below is organised by market sector, as Capral organises it.
Residential building systems
| Product / brand | Description and capabilities | Target customer | Launch / version | Notes |
|---|---|---|---|---|
| Artisan Architectural | Premium architectural residential window and door suite | Architects, high-end residential fabricators | — | Flagship premium residential range |
| Futureline Thermal | Thermally broken window and door frames for energy-efficient homes (NCC energy compliance) | Fabricators serving energy-rated housing | — | Featured with Schüco doors in project case studies (HY21 presentation) |
| Urban Plus Designer | Designer residential window/door range | Residential fabricators, builders | — | Cited in 1H26 project references |
| Urban Residential | Mainstream residential windows and doors | Volume builders, fabricators | — | Core volume range |
| Envy | Residential system (showers / wardrobes / interiors per brand listings) | Fabricators, renovators | — | Brand listed by data aggregators |
| Elegance | Residential system (shower and wardrobe category) | Fabricators, renovators | — | Brand listed by data aggregators |
| Amplimesh | Security screens, security doors and windows, bushfire-rated mesh | Security fabricators, homeowners in BAL zones | Long-established brand | Security products category |
| Juralco | Home improvement / DIY aluminium systems (e.g., fencing, screening, framing) | DIY and trade, home improvement | — | Home improvement category |
| Showers and wardrobes | Aluminium frames and components | Fabricators | — | Residential sector per Note 4 |
| Hardware and accessories | Window/door hardware, safety products | Fabricators | Expanded via a 2025 hardware bolt-on and Comsupply | One 2025 acquisition was "in the window and door hardware market" (AGM 2026) |
Commercial building systems
| Product / brand | Description and capabilities | Target customer | Launch / version | Notes |
|---|---|---|---|---|
| AGS Commercial (Architectural Glazing Systems) | Commercial window, door, shopfront and framing systems; curtain wall; sunshades and louvres | Commercial glaziers, façade contractors | — | Most-cited product in 1H26 project references |
| Narrowline Glazing System | Slim-profile commercial glazing | Commercial glaziers | — | Cited in FY20 presentation |
| Schüco (distributed) | German premium façade, window and door systems supplied/fabricated under arrangement | High-end commercial/residential | Long-standing | Third-party brand distributed by Capral |
| QRK partition systems | Patented aluminium partition systems for internal fit-outs | Office fit-out contractors | Acquired with Comsupply (Oct 2025) | Capral plans national roll-out via its specification capability |
| Thermal breaks, curtain walls, sunshades/louvres | Façade performance products | Façade engineers | — | Listed in product taxonomy |
| Accessibility and education solutions | Systems for compliance-driven building types | Schools, aged care, public buildings | — | Application-based solutions |
| Deco cladding / sheet façades | Aluminium sheet used in architectural façades | Façade contractors | — | Project references (HY21) |
Industrial products
| Product line | Description and capabilities | Target customer | Notes |
|---|---|---|---|
| Custom extrusions | Bespoke profiles in architectural and industrial alloys; eight presses nationally | OEMs, fabricators | Core manufactured product |
| Geometric shapes | Angles, channels, tee sections, flat bar, rectangular and square hollows, solids, tube, round bar, machine rod | Fabricators, distributors | Stock range through trade centres |
| Plate, sheet, treadplate | Rolled products (largely imported/bought-in), including marine-grade plate | Marine, transport, fabrication | Delayed rolled-product shipments inflated FY2022 inventory |
| Marine-grade plate and extrusion | Class-society-accreditable products (ABS, DNV, Lloyd's, Bureau Veritas, ClassNK historically cited) | Boatbuilders, defence | Marine demand "strong" in 1H26 |
| Transport extrusions | Trailer, tipper and tanker profiles | Trailer OEMs (e.g., Freighter Group, Lusty EMS) | Long-standing transport heritage via Hockney Alcan lineage |
| Qubelok | Modular aluminium tube-and-connector framing system | Shopfitters, display builders | Brand within industrial/extrusion range |
| Moulds and trims; signage extrusions | Decorative and signage profiles | Sign makers, interior fit-out | — |
| Fencing and screening posts; seating | Outdoor/urban products | Landscapers, councils, urban art | Urban art industry listed |
| Scaffold planks, toolboxes | Fabricated industrial products | Construction, transport | — |
| Energy infrastructure extrusions | Substation structures (Project EnergyConnect via PLP Australia: Buronga, Dinawan, Wagga Wagga) | Utilities' EPC contractors | 90th-anniversary communications |
| Solar framing extrusions | Frames for Australian-made solar panels | Tindo Solar | Supply partnership |
| Data centre applications | Extrusions for AI/data centre build-out | Data centre contractors | "Emerging growth opportunity" (1H26) |
Low-carbon and certified offerings
| Offering | Specification | Launch | Status |
|---|---|---|---|
| LocAl® Green | Lower-carbon primary aluminium, 8 kg CO2e/kg Al | Nov 2022 | EPD in place (2026) |
| LocAl® Super Green (LocAl-SG) | 4 kg CO2e/kg Al, up to 75% below global average primary aluminium | Nov 2022 | EPD in place (2026); volumes rose about 4x in 2024 |
| ASI-certified product | Aluminium Stewardship Initiative Performance and Chain of Custody | Certified 2023; maintained 2024–2026 | Capral states it is the only ASI-certified extruder in Australia |
| Australian Made logo | Licensee for locally extruded products | 2,026 | Marketing differentiation against imports |
Services
| Service | Detail |
|---|---|
| Powder coating | Wide colour range; NSW capability since the Huntingwood paint line (2023); also at other plants |
| Anodising | Including gold anodised finishes (project references) |
| Fabrication | Cutting, punching, CNC machining, routing, drilling on extrusion, sheet and plate |
| Testing | In-house NATA-approved laboratory for strength-of-materials testing (historical company description) |
| Logistics | National distribution network, new freight management software (2024), scrap skip-bin closed-loop collection from customers |
| Specification support | Architectural specification team for commercial and residential systems |
Financial Narrative
Source mapping:
-
FY2021–FY2022: FY2022 Appendix 4E / annual report.
-
FY2023–FY2024: FY2024 Appendix 4E / annual report.
-
FY2025 P&L: 2026 AGM addresses and FY2025 results call coverage.
-
FY2025 balance sheet: 31 December 2025 comparatives in the 1H26 Appendix 4D.
Income statement
Notes:
-
FY2025 D&A, finance costs and PBT are derived from reported EBITDA (A$61.9m), EBIT (A$38.1m), NPAT (A$35.6m) and the disclosed A$2.5m tax benefit.
-
FY2022 reported EBITDA is derived as PBT plus finance costs plus D&A.
1H26 diluted EPS was 97.65 cents (1H25: 89.40 cents).
Underlying (non-IFRS) earnings as reported by management
Notes:
-
FY2023 is omitted because underlying EBITDA and EBIT for FY2023 were not separately verified. Management said FY2023 underlying earnings were "on par with the prior year's record," and FY2023 underlying EPS was A$1.83 versus A$1.96 in FY2022.
-
FY2025 underlying EBITDA is derived as underlying EBIT (A$35.8m) plus D&A (A$23.8m).
-
Significant items comprise LME/FX revaluation, deferred tax asset recognition, property revaluation (FY2021 A$3.1m, through OCI), a FY2025 insurance claim recovery (about A$3.0m) and minor abnormal items.
Margins and growth
Notes:
- FY2021 revenue growth uses FY2020 revenue of A$432.0m.
Gross profit: not reported. As a proxy, revenue less raw materials and consumables (the "metal and materials spread") is shown below.
The 1H26 spread was 34.9% (A$130.2m on A$372.8m), compared with 35.8% in 1H25.
Revenue CAGR FY2021–FY2025: 3.7% a year (A$593.5m to A$686.0m). Volume CAGR: −3.9% a year (76,300 t to 65,000 t). Price and mix (largely LME) therefore explain all of the nominal revenue growth.
Balance sheet
30 June 2026: cash A$62.1m; total assets A$513.8m; equity A$251.5m; inventories A$171.9m; receivables A$118.5m; payables A$165.0m; lease liabilities A$71.3m; NTA per share A$13.43.
Banking facilities (30 June 2026): A$83.0m in total, comprising an ANZ A$50m multi-option facility, A$25m with other lenders, A$5m of other secured facilities and A$3m unsecured. Of this, A$53.5m is utilised, almost entirely trade finance (drawn letters of credit A$36.8m, open letters of credit A$12.3m) plus guarantees of A$4.3m.
Cash flow
FY2025 cash-flow notes:
OCF: is approximate ("just under A$44m," results call coverage).
Acquisition cash: for Comsupply and the Sydney bolt-on was not disclosed; the A$3.0m shown is a placeholder. Treat it as not publicly disclosed.
Dividends paid: of A$6.8m equal the FY2024 final dividend paid in March 2025 (A$6.751m per the 1H25 cash flow; no interim was paid in 2025).
Buy-backs: of about A$9.2m are derived from the movements in issued capital and the buy-back reserve.
Company-defined free cash flow (OCF less investing cash flows and lease payments, per the Remuneration Report): FY2021 A$17.2m; FY2022 −A$16.4m; FY2023 A$52.4m; FY2024 A$28.6m. 1H26 free cash flow after leases was A$10.3m (1H25: −A$4.6m).
Ratios
All ratios are derived from the statutory figures above. ROIC applies a notional 30% tax rate; Capral pays no cash income tax because of carried-forward losses, so cash ROIC is materially higher. Finance costs are almost entirely the interest component of leases (A$4.8m of A$5.6m in FY2024).
DSO is overstated because receivables include GST while revenue excludes it.
Commentary: trends, inflections and drivers
Revenue. Revenue tracks LME far more than volume. The FY2021–FY2022 surge (A$432m in FY2020 to A$692.5m in FY2022) reflected a post-COVID housing stimulus boom plus record aluminium prices: Capral's average LME cost rose about 30% in 2021 and a further 22% in 2022. Revenue then eased in FY2023–FY2024 as LME normalised and housing cooled. FY2025 revenue rose 6% on an LME increase of about 12% despite volume falling 4%. 1H26 revenue rose 14% on Middle East-driven LME and regional-premium spikes. Volume has fallen every year since FY2021, a cumulative 15%, reflecting:
-
the end of the stimulus-era pipeline;
-
the return of imports once supply chains normalised in 2H22;
-
weak detached-housing commencements (167,800 total starts in 2024, about 25% below 2021–2022 peaks);
-
softer transport, infrastructure and manufacturing demand in 2025.
Earnings resilience. The defining feature is stable earnings on falling volume. Underlying EBIT per tonne rose from A$474 (FY2021) to A$568 (FY2022), dipped to A$506 (FY2024) and recovered to A$551 (FY2025). The drivers are the 2019 Bremer Park restructure, shift reductions matched to demand, Smithfield and Penrith productivity upgrades, sales-mix improvement towards distribution and building systems, and acquisitions. The EBITDA margin has held in a tight 8.7–10.0% band.
Statutory versus underlying NPAT. Reported NPAT has been flattered by deferred tax asset recognition in four of the last five years: A$9.4m (FY2021), A$8.4m (FY2022), A$3.6m (FY2024) and A$2.5m (FY2025). FY2025 also included a roughly A$3.0m insurance claim recovery. Excluding these, FY2025 NPAT would be about A$30m. On a fully taxed basis (30% on PBT of A$33.1m), it would be about A$23m. 1H26 NPAT of A$15.9m included no tax benefit, which signals improving underlying quality, although it benefited from a A$1.5m LME revaluation gain.
Balance sheet. Net cash has ranged from A$25m to A$69m. The FY2022 trough (A$24.9m, with A$24.1m of trade loans drawn) shows working-capital sensitivity to LME: inventory rose to A$154.9m and payables fell. The same dynamic recurred in FY2025, when inventory rose to A$175.5m. Equity has grown 55% since FY2021 despite distributions. Lease liabilities have fallen from A$103.5m to A$73.2m as property leases amortise, which could reverse on renewal of major site leases.
Cash flow. Operating cash flow is volatile because of working capital: A$7.1m in FY2022 against A$75.0m in FY2023. Over five years, cumulative OCF of about A$220m funded about A$50m of capex, about A$80m of lease principal, about A$20m of acquisitions and about A$67m of distributions. Cash holdings still rose.
Returns. ROE has normalised from a stimulus-era 31% to about 15%, while ROIC (at a notional tax rate) has held at about 10–11%. This is respectable for a cyclical converter, and is earned with no financial leverage.
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansFinancial Detail
Results by Segment and Segment Margins & Growth (%)
| Metric | FY2023 | FY2024 | FY2025 |
|---|---|---|---|
Segment revenue (AUD Mn) | 656.9 | 649.7 | 686.0 |
Segment EBIT, reported (AUD Mn) | 38.5 | 34.5 | 38.1 |
Segment underlying EBIT (AUD Mn) | 38.5 | 34.3 | 35.8 |
Segment EBIT margin, reported (%) | 5.9 | 5.3 | 5.6 |
Sales volume (tonnes) | 71,100 | 67,800 | 65,000 |
Revenue YoY growth (%) | -5.1 | -1.1 | 5.6 |
Contribution to Group revenue (%) | 100 | 100 | 100 |
Dimension Details
| Dimension | Disclosure | Source |
|---|---|---|
Direct mill sales share of volume | 52% (12 months to June 2026) | 1H26 presentation |
Distribution channel share of volume | ~48% (derived) | 1H26 presentation |
Residential share of volume | ~40% | FY2024 Chairman's Report |
Industrial share of volume | Not publicly disclosed; industrial volume index trending above 2012 base | 1H26 presentation |
Segment Revenue
| Metric | 1H25 | 1H26 |
|---|---|---|
Revenue (AUD Mn) | 327.2 | 372.8 |
Volume (tonnes) | 31,250 | 32,500 |
Underlying EBITDA (AUD Mn) | 27.7 | 29.0 |
Underlying EBIT (AUD Mn) | 16.1 | 16.7 |
Underlying EBITDA margin (%) | 8.5 | 7.8 |
Underlying EBIT per tonne (AUD) | 515 | 514 |
Income Statement and Operating Metrics (tonnes)
| Metric | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
Revenue (AUD Mn) | 593.5 | 692.5 | 656.9 | 649.7 | 686.0 |
Sales revenue excl. scrap (AUD Mn) | 550.9 | 643.3 | 614.8 | 604.4 | 650.0 |
Sales volume (tonnes) | 76,300 | 71,800 | 71,100 | 67,800 | 65,000 |
Revenue per tonne (AUD) | 7,778 | 9,645 | 9,239 | 9,583 | 10,554 |
EBITDA, reported (AUD Mn) | 59.2 | 60.0 | 61.5 | 58.3 | 61.9 |
Depreciation and amortisation (AUD Mn) | 20.2 | 21.3 | 23.0 | 23.8 | 23.8 |
EBIT, reported (AUD Mn) | 39.0 | 38.7 | 38.5 | 34.5 | 38.1 |
Finance costs (AUD Mn) | 5.8 | 6.3 | 6.7 | 5.6 | 5.0 |
Profit before tax (AUD Mn) | 33.3 | 32.4 | 31.8 | 28.9 | 33.1 |
Income tax benefit (AUD Mn) | 9.4 | 8.4 | 0.0 | 3.6 | 2.5 |
Net profit after tax (AUD Mn) | 42.7 | 40.8 | 31.8 | 32.5 | 35.6 |
EPS basic (AUD) | 2.52 | 2.31 | 1.77 | 1.88 | 2.15 |
Dividends per share declared (A$ cents) | 70 | 70 | 55 | 40 | 30 |
Income Statement and Unit Economics (AUD/tonne)
| Metric | FY2021 | FY2022 | FY2024 | FY2025 |
|---|---|---|---|---|
Underlying EBITDA (AUD Mn) | 56.4 | 62.2 | 58.3 | 59.6 |
Underlying EBIT (AUD Mn) | 36.2 | 40.8 | 34.3 | 35.8 |
Underlying EBIT per tonne (AUD) | 474 | 568 | 506 | 551 |
Margin Analysis (%)
| Metric | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
EBITDA margin (%) | 10.0 | 8.7 | 9.4 | 9.0 | 9.0 |
EBIT margin (%) | 6.6 | 5.6 | 5.9 | 5.3 | 5.6 |
Pre-tax margin (%) | 5.6 | 4.7 | 4.8 | 4.4 | 4.8 |
Net margin (%) | 7.2 | 5.9 | 4.8 | 5.0 | 5.2 |
Revenue growth YoY (%) | 37.4 | 16.7 | -5.1 | -1.1 | 5.6 |
Volume growth YoY (%) | 0.0 | -5.9 | -1.0 | -4.6 | -4.1 |
Income Statement and Margin Analysis (%)
| Metric | FY2021 | FY2022 | FY2023 | FY2024 |
|---|---|---|---|---|
Raw materials and consumables (AUD Mn) | 376.4 | 468.7 | 423.2 | 410.4 |
Revenue less raw materials (AUD Mn) | 217.1 | 223.8 | 233.6 | 239.3 |
Spread as % of revenue (%) | 36.6 | 32.3 | 35.6 | 36.8 |
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansBalance Sheet and Per-Share Data
| Metric | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
Total assets (AUD Mn) | 425.3 | 446.8 | 425.2 | 472.4 | 482.9 |
Cash and equivalents (AUD Mn) | 50.1 | 49.0 | 59.5 | 68.9 | 60.5 |
Bank borrowings — short-term trade loans (AUD Mn) | 0.0 | 24.1 | 0.0 | 0.0 | 0.0 |
Bank borrowings — long-term (AUD Mn) | 0.0 | 0.0 | 0.0 | 0.0 | 0.0 |
Lease liabilities — current (AUD Mn) | 15.8 | 16.2 | 15.6 | 16.9 | 18.2 |
Lease liabilities — non-current (AUD Mn) | 87.7 | 77.9 | 73.3 | 66.0 | 55.0 |
Net cash excl. leases (AUD Mn) | 50.1 | 24.9 | 59.5 | 68.9 | 60.5 |
Net debt incl. leases (AUD Mn) | 53.4 | 69.1 | 29.3 | 14.0 | 12.7 |
Total equity (AUD Mn) | 157.1 | 189.7 | 204.7 | 225.1 | 243.8 |
Goodwill (AUD Mn) | 3.1 | 3.1 | 3.1 | 4.7 | 6.3 |
Other intangibles (AUD Mn) | 0.7 | 0.6 | 0.6 | 1.6 | 2.7 |
Deferred tax assets (AUD Mn) | 15.3 | 23.7 | 23.7 | 27.3 | 29.0 |
Trade and other receivables (AUD Mn) | 96.3 | 91.3 | 89.3 | 91.8 | 90.6 |
Inventories (AUD Mn) | 130.5 | 154.9 | 126.2 | 155.4 | 175.5 |
Trade and other payables (AUD Mn) | 139.0 | 112.7 | 107.0 | 141.4 | 139.4 |
Working capital, current assets less current liabilities (AUD Mn) | 103.8 | 124.2 | 138.0 | 147.4 | 152.8 |
Trade working capital, receivables + inventory − payables (AUD Mn) | 87.8 | 133.5 | 108.5 | 105.8 | 126.7 |
NTA per share (AUD) | 8.03 | 9.14 | 10.03 | 11.25 | 12.72 |
Shares on issue (millions) | 17.19 | 17.77 | 17.69 | 17.03 | 16.17 |
Cash Flow
| Metric | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
Operating cash flow (AUD Mn) | 41.7 | 7.1 | 75.0 | 52.7 | 44.0 |
Capex, PP&E plus intangibles (AUD Mn) | 9.5 | 10.0 | 8.8 | 9.7 | 11.8 |
Free cash flow, OCF less capex (AUD Mn) | 32.2 | -2.9 | 66.2 | 43.0 | 32.2 |
Lease principal repayments (AUD Mn) | 15.0 | 14.5 | 15.8 | 16.5 | 18.5 |
Acquisitions, cash (AUD Mn) | 10.3 | 0.0 | 0.0 | 6.8 | 3.0 |
Dividends paid, gross (AUD Mn) | 10.9 | 12.2 | 12.5 | 6.1 | 6.8 |
Share buy-backs (AUD Mn) | 0.0 | 0.0 | 3.1 | 6.2 | 9.2 |
Returns & Leverage Ratios (%) and Financial Ratios (x)
| Ratio | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
ROE, NPAT / average equity (%) | 31.0 | 23.5 | 16.1 | 15.1 | 15.2 |
ROA, NPAT / year-end assets (%) | 10.0 | 9.1 | 7.5 | 6.9 | 7.4 |
ROIC, EBIT×(1−30%) / invested capital incl. leases (%) | 13.0 | 10.5 | 11.5 | 10.1 | 10.4 |
Current ratio (x) | 1.60 | 1.72 | 1.99 | 1.85 | 1.87 |
Debt incl. leases / equity (x) | 0.66 | 0.62 | 0.43 | 0.37 | 0.30 |
Net debt incl. leases / EBITDA (x) | 0.90 | 1.15 | 0.48 | 0.24 | 0.21 |
Interest coverage, EBIT / finance costs (x) | 6.8 | 6.1 | 5.8 | 6.2 | 7.6 |
Asset turnover, revenue / year-end assets (x) | 1.40 | 1.55 | 1.54 | 1.38 | 1.42 |
Working Capital (Days)
| Metric | FY2021 | FY2022 | FY2023 | FY2024 |
|---|---|---|---|---|
Days sales outstanding (days) | 59.2 | 48.1 | 49.6 | 51.6 |
Days inventory, on raw materials (days) | 126.5 | 120.6 | 108.8 | 138.2 |
Days payables, on raw materials (days) | 134.8 | 87.8 | 92.3 | 125.8 |
Cash conversion cycle (days) | 50.9 | 80.9 | 66.1 | 64.0 |
Revenue by Region and Revenue by Region (%)
| Region | FY2023 | FY2024 | FY2025 |
|---|---|---|---|
Australia revenue (AUD Mn) | 656.9 | 649.7 | 686.0 |
Australia share of revenue (%) | 100 | 100 | 100 |
Australia revenue growth (%) | -5.1 | -1.1 | 5.6 |
Region Overview
| Region | Direction | Evidence |
|---|---|---|
New South Wales | Strategic growth focus | Smithfield plant acquired 2021 (moved from one to three shifts in 2022); Penrith press, furnace and saw upgrades (2023–2025); Huntingwood paint line (2023); Wollongong centre (2022); Sydney bolt-on (2025). Rationale: "expand manufacturing presence in the large NSW market reducing freight" |
Victoria | Distribution expansion | Aluminium Trade Centre Melbourne (2024); new Geelong Trade Centre (June 2026); Campbellfield plant with 800 kW solar |
Queensland | Core manufacturing plus distribution | Bremer Park (largest plant, restructured 2019); North Brisbane centre (2022); Apple Aluminium (2024) |
Western Australia | New systems platform | Comsupply (Belmont) acquisition, Oct 2025: more than 350 accounts, about A$15m revenue; Canning Vale plant |
South Australia | Stable manufacturing | Angaston plant (enterprise agreement to Nov 2027) |
Valuation Snapshot
| Metric | Value |
|---|---|
Current price (9 Oct 2026) | A$11.77 (Investing.com) |
2026 year-to-date | −1.8% (from A$11.99 opening 2026) |
Calendar 2025 | +20.6% (A$9.95 to A$12.00) |
52-week / 2026 range | A$10.33 – A$13.20 |
Since end-CY2024 (A$9.95) | +18.3% |
Since end-CY2022 close (A$7.40) | +59.1% |
Since end-CY2020 close (A$5.95) | +97.8% |
Share Price
| Metric | FY2020 | FY2021 | FY2022 | FY2023 | FY2024 |
|---|---|---|---|---|---|
Annual VWAP share price (AUD) | 4.14 | 7.44 | 8.42 | 8.19 | 9.28 |
Year-end closing price (AUD) | 5.95 | 9.47 | 7.40 | 8.50 | 9.95 |
Valuation Snapshot — LTM revenue
| Metric | Value | Basis |
|---|---|---|
LTM revenue (2H25 + 1H26) | A$731.6m | Derived: 686.0 − 327.2 + 372.8 |
LTM EBITDA (statutory, post-AASB 16) | A$65.4m | Derived: 61.9 − 26.8 + 30.3 |
LTM NPAT | A$36.2m | Derived: 35.6 − 15.3 + 15.9 |
LTM EPS | A$2.24 | Derived: 2.15 − 0.908 + 0.994 |
P/E (LTM statutory) | 5.3x | — |
P/E (LTM, fully taxed at 30% on PBT of A$36.2m) | 7.3x | Normalised for nil tax |
EV incl. leases (cap + A$71.3m leases − A$62.1m cash) | ~A$195.2m | 30 Jun 2026 balance sheet |
EV / EBITDA (LTM) | 3.0x | — |
EV / Sales (LTM) | 0.27x | — |
P/B | 0.74x | Equity A$251.5m |
P/NTA | 0.88x | NTA A$13.43 per share |
Trailing dividend yield | 2.5% | 30c FY2025 final, unfranked |
FY2025 total distribution yield (dividends plus buy-back equivalent) | 7.2% | 85c per share |
Per-Share Data and Margin Analysis (%)
| Metric | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
Interim dividend (A$ cents) | 20 | 20 | 20 | 0 | 0 |
Final dividend (A$ cents) | 50 | 50 | 35 | 40 | 30 |
Total dividend (A$ cents) | 70 | 70 | 55 | 40 | 30 |
Buy-back equivalent (A$ cents) | 0 | 0 | 17.5 | 36 | 55 |
Total distribution (A$ cents) | 70 | 70 | 72.5 | 76 | 85 |
Franking (%) | 100 | 100 | 100 | 0 | 0 |
Analyst Conclusions
Management guidance
FY2026: "Despite some market and cost headwinds, full-year earnings are expected to be broadly in line with the prior year depending on some recovery of the residential housing market" (1H26 release, 24 Aug 2026).
Management highlights several factors:
-
2H is "historically stronger."
-
The full impact of higher metal costs will land in 2H26.
-
Residential construction is forecast to lift demand in 2H26.
-
Industrial demand is expected to remain stable.
-
Aluminium and freight costs remain the key sensitivities.
Implied FY2026 underlying EBIT is about A$35–37m. This is derived from the FY2025 underlying EBIT of A$35.8m and is not company guidance.
Consensus growth expectations
Not reliably available (thin coverage).
Bull case
-
Cyclical trough plus operating leverage. Volume is about 15% below FY2021 and mills are running reduced shifts. A forecast 7–15% rebound in low-rise and detached starts, flowing through with a two-quarter lag, could add several thousand tonnes. At about A$550/t underlying EBIT (rising with absorption), each 5,000 t adds roughly A$3–4m of EBIT on a largely fixed cost base.
-
Deep value with self-help. At 0.88x NTA, about 3x EV/EBITDA and about 5–7x earnings, with net cash of A$62m (about a third of market cap), the buy-back retires stock below book. Each 10% program is materially accretive to EPS and NTA per share.
-
Protected, greener niche. Anti-dumping measures run to about 2030 (China) and 2028 (Malaysia/Vietnam). The ASI and EPD-backed LocAl offer and the Australian Made positioning could turn into a specification premium as embodied-carbon rules tighten. Data-centre and transmission demand add new industrial legs.
Bear case
-
Structural erosion of the core. Volume has fallen every year since FY2021. Fabricators, the largest direct-mill customer group, are losing share to imported finished windows that anti-dumping duties on extrusions do not cover. A housing recovery may lift the market without lifting Capral's share.
-
Margin squeeze in 2H26. Management warns that the "full impact of materially higher metal costs" arrives in 2H26. 1H26 underlying EBITDA margin already compressed to 7.8% from 8.5%. Combined with freight under-recovery, a new Bremer Park enterprise agreement and weak residential pricing power, flat earnings may prove optimistic.
-
Lower-quality earnings and capped returns. Statutory NPAT has leaned on deferred tax recognition and one-offs. On a normalised tax basis, earnings are about 30% lower. The payout ceiling has been cut to 60%, and the register is concentrated with thin liquidity, which may keep a permanent discount.
Key catalysts and monitorables (next 12 months)
| Catalyst / monitorable | Timing |
|---|---|
| Bremer Park production enterprise agreement renegotiation | From 30 Oct 2026 |
| Monthly ABS building approvals and commencements (detached) | Ongoing |
| LME aluminium and Asian/Japanese regional premiums; billet supply normalisation post-Middle East disruption | Ongoing |
| FY2026 full-year results, final dividend and FY2027 outlook | ~Late February 2027 |
| New buy-back program for 2027 | ~March 2027 |
| ADC activity on Malaysian/Vietnamese measures (expiring 2028) and anti-dumping system reforms | 2026–2027 |
| Further distribution bolt-ons; QRK national roll-out | Ongoing |
| Allan Gray (~24%) and Perpetual register movements; any change-of-control interest | Ongoing |
| 2027 AGM and board renewal (board of 4) | ~May 2027 |
| Scope 1+2 baseline restatement after external review | 2026–2027 |
Analyst verdict
Capral is a well-run, financially conservative cyclical that has proven it can hold earnings flat through a long housing downturn. It has not yet proven it can grow.
Since the 2019 restructure, management has kept underlying EBIT within a A$34–41m band despite a 15% fall in volume. It has built net cash of about A$60m, and returned 70–85 cents per share a year, increasingly through buy-backs executed below net tangible asset value. The FY2025 result (underlying EBIT A$35.8m, +4%) and 1H26 (A$16.7m, +4%, with no tax benefit) confirm that the post-restructure earnings floor is real.
The valuation is undemanding: about 3x EV/EBITDA, about 0.9x NTA and about 7x fully taxed earnings. The market is pricing Capral as if the volume decline is permanent and the anti-dumping shield is fragile. Both concerns are legitimate. Imported finished windows bypass extrusion duties and are hollowing out Capral's fabricator customer base. The Middle East-driven metal cost spike will test pricing power in 2H26, exactly when management needs a housing recovery to hold earnings flat.
The balance of evidence favours a constructive but disciplined view. Downside is cushioned by cash, tangible assets, tax losses and a buy-back that shrinks the share count by up to 10% a year. Upside depends on a detached-housing recovery reaching Capral's mills in 2027, plus successful execution of the distribution and building-systems strategy (Comsupply/QRK, Geelong, data centres).
Verdict: undervalued, high-quality small-cap cyclical. Accumulate on weakness, with position sizing tempered by illiquidity and register concentration. The key thesis tests over the next 12 months are:
-
2H26 margin defence;
-
the Bremer Park wage outcome;
-
evidence that distribution growth can offset fabricator attrition.
A failure on margin defence, or any weakening of anti-dumping protection, would invalidate the thesis.
End of dossier. All figures in A$ unless stated otherwise; fiscal years end 31 December.
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansExecutive Leadership
Executive Leadership Team
| Name | Title | Tenure | Prior roles | Education |
|---|---|---|---|---|
Anthony (Tony) Matthew Dragicevich | Managing Director and CEO | Joined Jan 2013; MD/CEO since 15 Apr 2013 | MD, Wattyl Group; Chief Executive, GWA Bathroom and Fittings; MD, Red Paper Group; GM, Tasman Insulation. NED, Fletcher Building since 1 Aug 2024 | B.Comm, ACA |
Tertius Campbell | Chief Financial Officer and Company Secretary | CFO since 1 Jun 2011; Co. Sec. since 8 Mar 2019 | Executive roles at UXC, Macsteel, The South African Breweries | B.Com (Hons), CA |
Barry Lunn | Divisional General Manager, Capral Building Systems | — | — | — |
Peter Darvell | General Manager, Southern Region | — | — | — |
L. Osbich | Joint Company Secretary (Company Matters Pty Ltd) | Since 19 Apr 2023 | Former ASX Listings Compliance Advisor | BA (Hons), LLB, GradDip Legal Practice |
“—” = not publicly disclosed.
Board of Directors
| Name | Role | Independence | Appointed | Committees | Background |
|---|---|---|---|---|---|
Mark White | Chairman | Independent | Director 1 Sep 2021; Chair 8 May 2024 | Audit & Risk; Remuneration & Nomination | More than 25 years in aluminium and building materials; GM of CSR's aluminium business (Tomago smelter JV share) until July 2024; Executive Director of Tomago for more than 13 years. B.Com, M.Com, ACA, GAICD |
Tony Dragicevich | Managing Director | Non-independent | 15 Apr 2013 | Attends ex officio | As above |
Bryan Tisher | Non-executive director | Independent | 24 Feb 2022 | Chair, Remuneration & Nomination (since 27 Apr 2023); Audit & Risk | CEO, Legend Corporation; ex-MD Orica Asia; ex-Divisional MD Boral Building Products; Rio Tinto. B.Eng, MBA |
Laurie Lefcourt | Non-executive director | Independent | 2025 (1H26 report: 17 Apr 2025; 1H25 report: 8 May 2025 — discrepancy noted) | Chair, Audit & Risk | Senior financial management, executive and board roles in the industrial sector; elected at 2026 AGM with 99.30% of votes in favour |
Directors' Remuneration
| Name | Salary/fees (AUD) | STI bonus (AUD) | Super (AUD) | Deferred equity (AUD) | Performance rights (AUD) | Total (AUD) | % performance-related |
|---|---|---|---|---|---|---|---|
A. Dragicevich (MD) | 735,875 | 384,950 | 27,500 | 62,350 | 304,094 | 1,514,769 | 50 |
T. Campbell (CFO) | 453,895 | 169,750 | 27,482 | 27,550 | 108,602 | 787,279 | 39 |
M. White (Chair from May 2024) | 109,478 | 0 | 12,366 | 0 | 0 | 121,844 | 0 |
K. Ostin (NED) | 85,731 | 0 | 9,647 | 0 | 0 | 95,378 | 0 |
B. Tisher (NED) | 85,731 | 0 | 0 | 0 | 0 | 95,378 | 0 |
R. Wood-Ward (Chair to May 2024) | 44,494 | 0 | 4,894 | 0 | 0 | 49,388 | 0 |
Major Shareholders
| Holder | Stake | Source / note |
|---|---|---|
Allan Gray Australia Pty Ltd | ~24.3% | Active trading in Feb 2026 (bought 363,082 and sold 652,706 shares per aggregator) |
Tony Dragicevich (MD) | ~3.5% (estimate) | 618,257 shares at Feb 2025, plus 2025/2026 LTIP vesting, less 50,000 sold 16 Sep 2025 and 50,000 sold 2 Dec 2025 |
Tertius Campbell (CFO) | ~0.6% (estimate) | 89,984 shares at end FY2024 |
Bryan Tisher | <0.1% | 4,500 shares at FY2024 plus 1,000 bought Apr 2025 |
Mark White | <0.1% | 1,047 shares at FY2024 plus 3,953 bought Mar 2025 |
Competitive Landscape
Key Competitors
| # | Competitor | Type | Overlap with Capral | Revenue | Positioning vs Capral |
|---|---|---|---|---|---|
| 1 | Chinese aluminium extrusion exporters (multiple mills) | Importers | Mill finish and fabricated extrusions across all sectors | Not applicable | Subject to anti-dumping and countervailing measures (extended from Oct 2025); main price competition |
| 2 | Malaysian and Vietnamese extrusion exporters (e.g., PMB Aluminium Sdn Bhd, an interested party in ADC case 544) | Importers | Industrial and building extrusions | — | Measures against some exporters in place until 2028 |
| 3 | Imported finished windows and doors | Substitute | Residential windows | Not applicable | Fabricators "continue to report share lost to imported windows" (1H26); erodes Capral's direct-mill base |
| 4 | G.James Glass & Aluminium | Domestic extruder and fabricator (private, Brisbane) | Commercial and residential extrusions and systems | — | Built a new two-press plant at Eagle Farm QLD (sold Smithfield to Capral) |
| 5 | Ullrich Aluminium | Extruder and distributor (private, NZ-origin) | Distribution, industrial and architectural | — | Direct competitor in trade distribution |
| 6 | Alspec | Window/door/façade systems house (private) | Residential and commercial systems | — | Competes with Capral's systems brands |
| 7 | AWS (Architectural Window Systems) | Systems house | Residential and commercial systems | — | Competes in fabricator systems |
| 8 | Midway Metals | Metals distributor (private) | Aluminium sheet, plate, extrusion distribution | — | Competes with Capral distribution and trade centres |
| 9 | Other domestic and local entrants | Extruders/distributors | Varied | — | Management cites "increased local competition from new entrants" as a key risk |
| 10 | Hydro Extrusions (Norsk Hydro) | Global extruder (benchmark) | Global benchmark; limited direct Australian overlap disclosed | Segment data in NOK | Q4 2025 Extrusions adjusted EBITDA was a loss of NOK 62m; closing five European plants |
| 11 | Constellium SE | Global rolled and extruded products (benchmark) | Global benchmark only | US$8,449m (FY2025) | Adjusted EBITDA US$846m (FY2025) |
“—” = not publicly disclosed.
Peer Comparison FY2025
| Metric | Capral (FY2025) | Constellium (FY2025) | Hydro Extrusions (2025) |
|---|---|---|---|
Revenue | A$686m | US$8,449m | — |
Revenue growth | +5.6% | +15% | Not compiled |
Volume growth | −4.1% | +4% (shipments 1.5 Mt) | "Somewhat lower volumes" in Q4 2025 |
EBITDA margin | 9.0% (reported) | 10.0% (adjusted, incl. metal price lag) | Negative in Q4 2025 |
ROIC | ~10.4% (derived, notional tax) | 9.0% (adjusted ROIC) | Not compiled |
Net leverage | Net cash A$60.5m (net debt incl. leases 0.2x EBITDA) | 2.5x | Group net debt NOK 9.7bn (Q4 2025) |
R&D intensity | — | Not compiled | Not compiled |
“—” = not publicly disclosed.
Recent Developments
--



