Coil S.A./N.V. Overview
COIL describes itself as the world's largest anodiser for the building and industrial sectors. It specialises in continuous coil-to-coil anodising of aluminium flat-rolled products, supplemented by batch anodising of sheets and panels. Its plants in Landen (Belgium) and Bernburg (Germany) operate continuous lines that, according to the company's corporate profile, can treat aluminium up to 2,000 mm wide and up to 5 mm thick, a dimensional envelope it presents as unique. About 80–86% of revenue is tolling: anodising metal owned by rolling mills and distributors. The balance comes from "packaged" sales, in which COIL supplies pre-anodised ALOXIDE® metal directly to architects, façade fabricators and industrial users. The company built a brief technology-licensing revenue line in China in 2024. Since 2023 it has lost money, breached bank covenants and needed an emergency reserved capital increase. In late 2025 control passed to a new Clarke-led shareholder group, and the company is now executing a cost-led turnaround.
Company's own description
In every recent release (FY2023–H1 2026), COIL describes itself as the world's leading anodiser in the building and industrial sectors, trading under the ALOXIDE brand. It explains anodising as an electrolytic process that grows a natural, protective oxide layer on aluminium. That layer can be coloured in UV-resistant finishes and improves corrosion resistance and functional properties, while keeping aluminium's rigidity, strength-to-weight ratio, non-magnetic behaviour and full recyclability by simple re-melting. The company lists architecture, design, manufacturing and automotive as its application fields. It frames its model as industrial value creation based on unique know-how, operational excellence, the quality of its investments and the expertise of its people (FY2025 annual results press release, 30 April 2026).
Third-party data providers (FMP and Simply Wall St, drawing on company materials) describe COIL as providing anodising services on aluminium flat-rolled products in coil form, sheets and panels in Europe. They list end uses in architecture, public works, welded tubes, automotive, consumer goods, medical, aerospace and signage, and brands including ALOXIDE, X-ICONIC, X-WALL, X-BOND, X-FLEX, X-DECO, X-TECH, X-TREAD, X-3D, X-MED and X-SKY. These sources say COIL serves customers through a network of distributors.
Business model and revenue model
COIL reports three revenue streams:
-
Tolling sales ("sous-traitance"). COIL anodises aluminium coil owned by the customer, typically a rolling mill or a metal distributor, and charges a conversion fee. The metal stays on the customer's balance sheet, so revenue reflects only the anodising value-add. This stream was 80.6% of FY2025 sales (EUR 15.64 million) and 86% of H1 2026 sales (about EUR 7.7 million).
-
Packaged sales ("ventes packagées" / "package offers"). COIL supplies continuous-anodised aluminium directly to the end customer, with both the anodising and the metal included in the price, according to the footnote definition in the 29 January 2026 release. These are project-driven, mostly high-end architectural façades in Europe and Asia. FY2025: EUR 3.77 million (19.4% of sales). H1 2026: EUR 1.2 million (14%).
-
Licensing and royalties. This stream comes from the February 2024 technology and brand licence in China. It produced EUR 2.0 million in FY2024 (H1 2024 only) and nothing in FY2025. China is excluded from the 2026 budget.
There is no subscription revenue. Analytically, the model is a fixed-cost-heavy industrial service. The company itself stresses that variable costs are only about 36% of sales (FY2023 annual results release, 30 April 2024), so volume swings flow strongly into EBITDA.
Value-chain position
COIL sits between primary rolling mills and distributors upstream and façade fabricators, panel makers, architects and OEM manufacturers downstream. In tolling, it effectively acts as an outsourced finishing step for the mills. Management describes the 2026 strategy as developing tolling in partnership with the main European rolling mills (H1 2026 revenue release, 29 July 2026). In packaged sales, COIL takes metal-price risk and sells a finished architectural product under its own brand.
Customer types and end-markets
| Customer type | Revenue stream | Notes (source) |
|---|---|---|
| European aluminium rolling mills | Tolling | Strategic partners in the turnaround model (H1 2026 release). A one-off rolling-mill order linked to a Chinese project boosted H1 2024 (29 Jan 2026 release). |
| Metal distributors / stockists | Tolling | Their inventory behaviour drove the 2023–2025 tolling decline: destocking when LME prices fell, restocking when prices rose (FY2023 and FY2025 releases). |
| Architects, façade contractors, project owners | Packaged | High-end architectural projects in Europe; Asian project pipeline; first significant Saudi Arabian project delivered in late 2025. |
| Industrial / OEM users | Tolling and packaged | Automotive, consumer goods, design and luxury brands (the 2020 ALOXIDE website release cites long-standing use by high-end luxury brands). |
| Licensee (China) | Licensing | Unnamed Chinese company; exclusive, perpetual licence (14 Feb 2024 release). |
| New partner in India | Packaged / tolling (not specified) | First order recorded in 2025 (29 Jan 2026 release). |
Independent characterisation
COIL is a sub-scale, single-process specialist with a genuinely niche technical position: wide, continuous anodising. That position was badly exposed by three things at once: European construction weakness, distributor destocking after the 2021–2022 aluminium price spike, and, from 2023, a new entrant in European continuous anodising. Revenue fell from EUR 29.8 million in FY2019 to EUR 19.4 million in FY2025, about -35%. With a cost base built for higher throughput, EBITDA went from EUR 6.3 million (24.8% margin) in FY2021 to EUR -1.1 million in FY2025. The China licence was a one-year relief, not a structural fix. The business is now controlled by a new reference shareholder group and run day-to-day by long-serving internal managers. It is pivoting to a leaner, tolling-centred model with flexible line utilisation.
Strategy
Stated strategy (latest)
From the FY2025 revenue release (29 January 2026), COIL is continuing in 2026 the disciplined adaptation of its business model around three strategic levers:
-
Cost and overhead optimisation, under close monitoring.
-
Industrial agility: adjusting production capacity to demand, particularly in Europe.
-
Using its technological expertise to support strategic customers and expand into high-growth markets, notably Asia, the Middle East and India.
The FY2025 results (30 April 2026) and H1 2026 revenue (29 July 2026) releases add that COIL is reorienting its commercial strategy toward a more resilient and competitive tolling model, in partnership with European rolling mills, alongside structural cost-reduction actions.
Initiatives register (last 24 months)
| Initiative | Date | Description | Target / status |
|---|---|---|---|
| China technology and brand licence | Feb 2024 – ongoing | Exclusive perpetual licence; upfront, milestone and royalty payments; 5% equity stake | EUR 2.0 million in 2024; zero in 2025; no material developments expected in 2026; excluded from budget |
| Short-term cash preservation | H1 2025 | Inventory reduction, investment cuts, workforce adjustment | Completed; full effect expected from H2 2025 |
| Medium-term financial recovery plan | Launched mid-2025 | Cost reduction (notably management costs), refocus on tolling, equity reinforcement | H2 2025 EBITDA EUR +1.2 million |
| Reserved capital increase | 3 Oct 2025 | EUR 1.3 million at EUR 0.50 per share | Completed |
| Governance overhaul | Oct–Nov 2025 | New board and management; fractional CFO | Completed; further MD change May 2026 |
| Global refinancing | Late 2025 – H1 2026 | Refinancing of all financing lines, including factoring, with a leading bank | Completed (30 Apr 2026 release) |
| International expansion | 2025–2026 | First order with an Indian partner; first significant Saudi project | Early stage |
| Tolling partnership model | 2,026 | Development of tolling with leading European rolling mills | Tolling +10.7% in H1 2026 |
| Responsible / low-carbon production | Ongoing | Positioning on sustainable, low-carbon products; on-site energy installation (Oct 2022) | No quantified targets disclosed |
Guidance and medium-term targets
FY2026 guidance (29 July 2026): H2 2026 activity broadly in line with H1 (about EUR 8.9 million). Full-year 2026 revenue may therefore come in below FY2025's EUR 19.4 million, implying about EUR 17.8 million (derived).
Medium-term financial targets: not publicly disclosed.
- No investor day has been held.
Products & Services
Tolling services
| Offering | Description | Key capabilities | Target customer | Pricing model |
|---|---|---|---|---|
| Continuous (coil-to-coil) anodising | Electrolytic anodising of aluminium coils on continuous horizontal and vertical lines | Coil and sheet up to 2,000 mm wide and up to 5 mm thick (corporate profile). Bernburg Line 6 (2017) is 250 m long and treats coils up to 2 m wide, oriented to thick anodic films. | European rolling mills, metal distributors | Conversion fee per tonne or m² (not disclosed) |
| Batch anodising of sheets and panels | Automated batch line using the Aloxide® process, transferred from Italy and set up in Landen (operational from 2018) | Post-anodising treatments and diversification beyond coil (Dec 2015 and Oct 2017 releases) | Fabricators, OEMs, architectural projects | — |
| Ancillary processing | Cut-to-length line (transferred from Capestrano to Landen, 2015/16) | Sheet supply from coil | Distributors, project customers | — |
Packaged products — ALOXIDE® family
| Brand | Indicated scope | Target application | Notes |
|---|---|---|---|
| ALOXIDE® | Master brand for anodised aluminium coil and sheet | All | Relaunched with new website and e-commerce in Feb 2020 |
| X-ICONIC | Premium architectural finishes (positioning per brand name; detail not publicly disclosed) | Landmark façades | Detailed specifications not publicly disclosed |
| X-WALL | Façade cladding / wall systems | Architecture | — |
| X-BOND | Anodised material for composite / bonded panels | Composite panel producers | — |
| X-FLEX | Formable / flexible anodised material | Fabrication requiring bending or forming | — |
| X-DECO | Decorative finishes | Interior design, consumer goods | — |
| X-TECH | Technical / functional anodic films | Industrial, automotive | — |
| X-TREAD | Tread / anti-slip or patterned surfaces (inferred from name) | Flooring, transport | — |
| X-3D | Three-dimensional / textured finishes (inferred from name) | Design, architecture | — |
| X-MED | Medical-sector applications | Medical equipment | — |
| X-SKY | Aerospace or roofing applications (scope not disclosed) | Aerospace / roofing | — |
ALOXIDE® is offered across a full range of anodic film thicknesses, from technical to architectural applications (17 February 2020 release). Sub-brands as listed by third-party profiles:
Technology licensing
| Offering | Description | Counterparty | Terms |
|---|---|---|---|
| Technology and brand licence (China, extended to South-East and North-East Asia) | Licence to exploit COIL's continuous anodising technology and brands, with a COIL-approved production line in China | Unnamed Chinese company | Exclusive and perpetual. Upfront and milestone payments for line construction and technology use, plus royalties. COIL to take a 5% equity stake. EUR 1.0 million upfront received in April 2024; EUR 2.0 million recognised in H1 2024; up to EUR 4.0 million expected over 2024–2025, but nothing recognised in 2025. (Releases of 14 Feb 2024, 30 Jul 2024, 31 Oct 2024, 29 Jan 2026.) |
Financial Narrative
Income statement: notes and sources
Sources: FY2021 release (29 Apr 2022), FY2022 and FY2023 (30 Apr 2024 release), FY2024 and FY2025 (30 Apr 2026 release). FY2024 recurring operating income is not disclosed in the releases reviewed.
Per-share data (EUR)
EPS is derived from net income divided by year-end shares. Simply Wall St shows FY2025 EPS of -0.88. The FY2022 DPS is derived from the EUR 2.8 million interim dividend paid in September 2022 divided by about 2.79 million shares; it is not confirmed as a per-share figure in the releases reviewed.
Margins (%)
Company-reported margins. FY2025 gross margin is derived from the Simply Wall St data.
Revenue CAGR: Total revenue FY2021–FY2025: (19.4 / 25.2)^(1/4) - 1 = -6.3% per year (derived). FY2019–FY2025, from EUR 29.8 million: -6.9% per year (derived).
Half-year income statement
H1 figures are company-reported (31 Oct 2023, 31 Oct 2024, 31 Oct 2025). H2 figures are derived as full year minus H1, except H2 2025 EBITDA of EUR 1.2 million, which the company disclosed in its 30 April 2026 release. The H1 2023 net income of EUR -0.1 million is the comparative shown in the H1 2024 table.
Commentary — income statement. The five-year arc has three phases:
-
FY2021 post-Covid peak margin. EBITDA of EUR 6.3 million on EUR 25.2 million of revenue reflects high tolling utilisation as distributors restocked during the aluminium price surge.
-
FY2022 margin collapse despite revenue growth. EBITDA fell EUR 3.4 million to EUR 2.9 million because of a mix shift toward lower-margin packaged sales (which include metal), energy-price inflation during the Russia-Ukraine shock and about EUR 2.5 million of non-recurring charges. A EUR 2.5 million goodwill impairment on continuous anodising assets pushed operating income to EUR -2.6 million (FY2022 results release, 28 April 2023).
-
FY2023–FY2025 volume-driven losses. Tolling fell 15.3% in FY2023 on destocking and the new competitor. Because variable costs are only about 36% of sales, EBITDA fell to EUR 0.6 million despite price increases and energy savings in Germany (FY2023 release). In FY2024, EUR 2.0 million of royalties masked an underlying EBITDA of roughly EUR -1.7 million excluding licensing (derived). FY2025 had no royalties and a 24.6% collapse in H1 tolling, giving H1 EBITDA of EUR -2.3 million. H2 2025 turned positive at EUR +1.2 million on tolling recovery (+5.8%), rising aluminium prices and early cost cuts, mainly in management costs. The FY2025 net loss of EUR -4.7 million includes a non-cash deferred-tax-asset reassessment and higher net financial expense (EUR -0.6 million).
The H2 2025 swing is the most important inflection in the series. It suggests that the restructured cost base can break even at EBITDA level on about EUR 10–11 million of half-year sales, although H1 2026 sales of EUR 8.9 million fall short of that level.
Balance sheet
Sources: FY2023 equity (21.4) and net debt (5.2) from the 30 Apr 2024 release. FY2022 values derived from the stated changes (equity -2.2, net debt -0.9). FY2024 net debt of 4.6 (25%) from the FY2024 release; FY2024 equity of 18.2 derived from FY2025 equity of 15.6 plus the stated decrease of 2.6. FY2025 from the 30 Apr 2026 release. FY2021 equity is derived as FY2022 equity plus the FY2022 loss (3.0) plus the September 2022 interim dividend (2.8), which assumes no other equity movements; it is an estimate.
Interim balance sheet data points:
-
30 June 2023: net debt 27% of equity.
-
30 June 2024: equity EUR 21.8 million; net debt EUR 3.4 million (15.5% of equity).
-
30 June 2025: net debt EUR 4.5 million (unaudited), consisting of gross debt EUR 4.8 million and available cash EUR 0.3 million (H1 2025 revenue release, 29 July 2025).
Goodwill: Impairments of EUR 2.5 million (FY2022) and EUR 1.3 million (FY2023) were booked on goodwill related to the continuous anodising cash-generating unit under IAS 36. The remaining balance is not publicly disclosed.
Commentary — balance sheet. Equity eroded from roughly EUR 29 million to EUR 15.6 million over four years: about EUR 13 million of cumulative losses, plus the 2022 dividend, offset by the EUR 1.3 million capital increase. Net debt actually declined from EUR 6.1 million to EUR 3.3 million. This reflects working-capital release (inventory reduction in 2025), lower investment and, in 2024, the China cash receipts, rather than operating cash generation. The headline gearing of 21% understates the stress. Net debt/EBITDA has been far above the 2.0x covenant since FY2023, and cash fell to EUR 0.3 million in mid-2025 before the capital raise. The company relies on factoring, which was refinanced in 2026.
Cash flow
Operating cash flow, capex and free cash flow are not publicly disclosed in the releases reviewed. Buybacks: none identified; a liquidity contract is in place (semi-annual report 21 July 2026), but this is not a buyback programme.
Commentary — cash flow. Cash conservation in H1 2025 came from inventory reduction, cuts to investment and workforce adjustments (3 October 2025 release). Capex appears to have been minimal since the EUR 32 million 2015–2017 programme, apart from the two lines started in 2018. The company states it has made "recent significant capital investments" that support refinancing (29 January 2026 release), but the amounts are not disclosed.
Ratios
All derived. FY2025 net debt/EBITDA is not meaningful because EBITDA was negative. ROA, ROIC, current ratio, interest coverage, asset turnover and the cash conversion cycle cannot be computed because total assets, current assets and liabilities, and interest expense detail are not publicly disclosed in the releases reviewed. FY2025 net financial expense was EUR -0.6 million, which together with negative EBITDA implies interest coverage below zero.
Covenant: Net debt/EBITDA < 2.00 with two Belgian banks was breached at 31 December 2024 and again at 31 December 2025. In FY2025, temporary waivers were obtained: one from a bank on grounds of exceptional circumstances, and one under a new financing agreement that includes an amortising loan of about EUR 1 million repayable September 2025–December 2026 (30 April 2026 release).
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansFinancial Detail
Business Lines
| Business line (EUR Mn) | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
Tolling Sales (EUR Mn) | 20.1 | 20.6 | 17.4 | 17.42 | 15.64 |
Packaged Sales (EUR Mn) | 5.1 | 6.1 | 4.4 | 4.73 | 3.77 |
Licensing and Royalties (EUR Mn) | 0 | 0 | 0 | 2.00 | 0 |
Total revenue (EUR Mn) | 25.2 | 26.7 | 21.8 | 24.15 | 19.41 |
Revenue by Segment (%) and Segment Margins & Growth (%)
| Metric | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
Tolling share of sales excl. licensing (%) | 79.8 | 77.2 | 79.9 | 78.6 | 80.6 |
Packaged share of sales excl. licensing (%) | 20.2 | 22.8 | 20.1 | 21.4 | 19.4 |
Tolling YoY growth (%) | — | 2.5 | -15.3 | 0.1 | -10.2 |
Packaged YoY growth (%) | — | 19.6 | -27.3 | 7.5 | -20.2 |
Licensing share of total revenue (%) | 0 | 0 | 0 | 8.3 | 0 |
Business Lines (Half-Yearly)
| Business line (EUR Mn) | H1 2023 | H1 2024 | H1 2025 | H1 2026 |
|---|---|---|---|---|
Tolling Sales (EUR Mn) | 9.3 | 9.20 | 6.94 | 7.68 |
Packaged Sales (EUR Mn) | 2.5 | 1.94 | 1.69 | 1.23 |
Sales excl. licensing (EUR Mn) | 11.79 | 11.13 | 8.63 | 8.91 |
Licensing and Royalties (EUR Mn) | 0 | 2.00 | 0 | 0 |
Total revenue (EUR Mn) | 11.79 | 13.13 | 8.63 | 8.91 |
Income Statement
| Metric | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
Total revenue incl. licensing (EUR Mn) | 25.2 | 26.7 | 21.8 | 24.1 | 19.4 |
Sales excl. licensing (EUR Mn) | 25.2 | 26.7 | 21.8 | 22.15 | 19.41 |
Gross profit (EUR Mn) | — | — | — | — | 10.9 |
EBITDA (EUR Mn) | 6.3 | 2.9 | 0.6 | 0.3 | -1.1 |
Recurring operating income (EUR Mn) | — | -0.1 | -2.1 | — | — |
Operating income (EUR Mn) | — | -2.6 | -2.7 | -2.8 | -3.3 |
Pre-tax income (EUR Mn) | — | -2.9 | -2.2 | -3.0 | -3.9 |
Net income (EUR Mn) | 2.1 | -3.0 | -2.2 | -3.2 | -4.7 |
Share Count (M) and Per-Share Data
| Metric | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
Shares outstanding at year end (M) | 2.79 | 2.79 | 2.79 | 2.79 | 5.39 |
EPS basic, on year-end shares (EUR) | 0.75 | -1.07 | -0.79 | -1.15 | -0.87 |
Dividend per share (EUR) | 0 | 1.00 | 0 | 0 | 0 |
Margin Analysis (%)
| Metric | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
Gross margin (%) | — | — | — | — | 56.2 |
EBITDA margin (%) | 24.8 | 10.9 | 2.6 | 1.1 | -5.8 |
Recurring operating margin (%) | — | -0.4 | -9.8 | — | — |
Operating margin (%) | — | -9.9 | -12.3 | -11.6 | -17.2 |
Net margin (%) | 8.1 | -11.2 | -10.2 | -13.1 | -24.2 |
Income Statement (Half-Yearly)
| Metric | H1 2023 | H2 2023 | H1 2024 | H2 2024 | H1 2025 | H2 2025 |
|---|---|---|---|---|---|---|
Total revenue (EUR Mn) | 11.79 | 10.0 | 13.13 | 11.02 | 8.63 | 10.78 |
EBITDA (EUR Mn) | 0.01 | 0.6 | 2.0 | -1.7 | -2.3 | 1.2 |
Net income (EUR Mn) | -0.1 | -2.1 | 0.5 | -3.7 | -3.6 | -1.1 |
Balance Sheet and Margin Analysis (%)
| Metric | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
Shareholders' equity (EUR Mn) | 29.4 | 23.6 | 21.4 | 18.2 | 15.6 |
Net financial debt (EUR Mn) | — | 6.1 | 5.2 | 4.6 | 3.3 |
Net debt / equity, gearing (%) | — | 26 | 24.3 | 25.3 | 21.3 |
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansDividends & Capital Returns
| Metric | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
Dividends paid (EUR Mn) | — | 2.8 | 0 | 0 | 0 |
Share buybacks (EUR Mn) | 0 | 0 | 0 | 0 | 0 |
Equity issued (EUR Mn) | 0 | 0 | 0 | 0 | 1.3 |
Returns & Leverage Ratios (%) and Financial Ratios (x)
| Ratio | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
ROE on average equity (%) | — | -11.3 | -9.8 | -16.2 | -27.8 |
Net debt / EBITDA (x) | — | 2.1 | 8.7 | 15.3 | — |
Net debt / equity (x) | — | 0.26 | 0.24 | 0.25 | 0.21 |
Revenue / equity (x) | 0.86 | 1.13 | 1.02 | 1.32 | 1.24 |
Region Overview
| Region | Revenue streams | Evidence | Trend |
|---|---|---|---|
Europe (core; Belgium, Germany and wider EU) | Tolling (the large majority), packaged | All tolling commentary refers to European distributors and rolling mills; packaged deliveries for high-end European architectural projects in 2022, H1 2023 and Q4 2024 | Declining 2023–H1 2025 on weak construction, destocking and the new competitor; tolling recovering in H2 2025 and H1 2026 |
China | Licensing; one-off tolling linked to a rolling-mill order for a Chinese project (2024) | Feb 2024 agreement; EUR 2.0 million royalties in H1 2024; rolling-mill order for a China project boosted H1 2024 tolling | Collapsed to zero in 2025; excluded from the 2026 budget |
Asia (other) | Packaged projects | A long history of selling to Asian customers (Feb 2024 release); slow post-Covid recovery of Asian projects (FY2023) | Pipeline cited, not quantified |
India | New partner | First order in 2025 | Emerging; priority market for 2026 |
Middle East (Saudi Arabia) | Packaged project | First significant project delivered before end-2025 | Emerging; exposed to shipping-route risk (Strait of Hormuz) |
Revenue by Region
| Region (EUR Mn) | FY2023 | FY2024 | FY2025 |
|---|---|---|---|
Total (EUR Mn) | 21.8 | 24.1 | 19.4 |
Share Price History
| Date | Price (EUR) | Source |
|---|---|---|
7 May 2024 | 5.10 | FMP valuation page |
3 May 2025 (approx.) | 1.19–1.20 | ABC Bourse forum quote |
29 Jan 2026 | 1.19 | ABC Bourse |
5 Jun 2026 | 1.19 | ABC Bourse |
26 Jun 2026 | 1.19 | Trivano |
16 Oct 2026 | 1.19 | Trivano |
Metric | FY2024 | FY2025 |
Indicative share price (EUR) | 5.10 | 1.19 |
Valuation Multiples
| Multiple | COIL | Basis |
|---|---|---|
Market cap (EUR Mn) | 6.4 | Derived |
Enterprise value (EUR Mn) | 9.7 | Market cap + FY2025 net debt of EUR 3.3 million (derived) |
EV/Sales (x) | 0.50 | EUR 9.7 million / EUR 19.4 million |
P/B (x) | 0.41 | EUR 6.4 million / EUR 15.6 million equity |
Dividends & Capital Returns (FY2022–FY2025)
| Metric | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|
Dividend paid (EUR Mn) | 2.8 | 0 | 0 | 0 |
Analyst Conclusions
Management guidance
H2 2026: activity broadly in line with H1 2026 (EUR 8.9 million).
FY2026: revenue may come in below FY2025 (EUR 19.4 million), implying about EUR 17.8 million (derived).
Strategy: cost and overhead optimisation, industrial agility, and expansion with strategic customers in Asia, the Middle East and India. China is excluded from budgets.
Visibility: limited in the short term (30 April 2026). Consensus estimates: none available.
Bull case (three arguments)
-
The turnaround is visible in the numbers. EBITDA swung from EUR -2.3 million (H1 2025) to EUR +1.2 million (H2 2025). If the leaner cost base holds, EBITDA-positive operation on about EUR 9–10 million of half-year sales is plausible, and the stock trades at 0.41x book and 0.5x EV/Sales.
-
The tolling partnership model is working. Tolling grew 10.7% in H1 2026 to 86% of sales. Base-load agreements with European rolling mills reduce dependence on volatile distributor stocking and on capital-intensive packaged projects.
-
There is optionality on top. India, Saudi Arabia and a possible revival of the China licence (up to about EUR 1 million of outstanding milestone value) cost little to pursue. An aluminium price upcycle has historically triggered restocking.
Bear case (three arguments)
-
The revenue base keeps shrinking. FY2026 is guided below FY2025, which was already about 35% below FY2019. Packaged sales fell about 27% in H1 2026, and the competitive entrant remains.
-
The balance sheet is fragile. Two consecutive covenant breaches, temporary waivers, a loan of about EUR 1 million due by December 2026, and equity eroding by EUR 2–5 million a year. Further dilutive raises at deep discounts (the last was EUR 0.50 against a EUR 1.19 quote) are a real risk.
-
Governance is concentrated and unstable. A combined Chair/CEO controls about 55% of the shares. Management turned over twice in eight months. The ousted former CEO still holds 18%. The free float is only about 15% and illiquid, and disclosure is limited.
Catalysts and monitorables (next 12 months)
| Catalyst | Timing | What to watch |
|---|---|---|
| H1 2026 results | 30 Oct 2026 | Whether H1 2026 EBITDA is positive; net debt; covenant status; cash |
| FY2026 revenue | Late Jan 2027 (expected) | Delivery against the H2 ≈ H1 guidance; tolling trend |
| Repayment of the amortising loan | By Dec 2026 | Refinancing headroom |
| Year-end 2026 covenant test | 31 Dec 2026 | A third breach versus compliance under the new facility |
| FY2026 annual results | Apr 2027 (expected) | Full-year EBITDA; any further impairment or deferred-tax charges |
| Shareholder dynamics | Ongoing | FMI's (18%) stance; any further capital raise or squeeze-out / delisting moves by the majority group |
| Aluminium prices and the Middle East | Ongoing | Restocking versus project delays and substitution |
| China / India / Gulf | Ongoing | Any licence milestones; repeat Indian and Saudi orders |
Analyst verdict
COIL is a technically differentiated but financially stressed micro-cap. It has a real niche asset, wide-format continuous anodising capacity in Belgium and Germany, attached to an earnings model that has not covered its fixed costs since 2022. The 2023–2025 period exposed how much of the FY2021 margin peak (24.8% EBITDA) was cyclical. It depended on distributor restocking during an aluminium price spike, and it was later eroded by a new European competitor, a weak construction market and the disappearance of one-off Chinese licence income. By mid-2025 the company had EUR 0.3 million of cash and under three months of visibility.
The October–November 2025 recapitalisation and change of control were decisive. A EUR 1.3 million raise at EUR 0.50, a new board led by the Clarke group with 55.5% of the shares, and a cost-focused management team produced a credible first proof point: H2 2025 EBITDA of EUR 1.2 million. H1 2026 tolling growth of 10.7% suggests the pivot toward mill partnerships is gaining traction.
The investment case nevertheless remains speculative. The revenue base is still contracting (FY2026 guided below EUR 19.4 million). Packaged sales are weakening. Covenant compliance has not been restored. Equity has fallen to EUR 15.6 million. The market price of EUR 1.19 is largely notional: the free float is about 15%, trading is thin, and the controlling group bought in at less than half that price. Minority shareholders face dilution, governance-concentration and possible delisting risks that the 0.4x price-to-book discount only partly reflects.
Verdict: a high-risk special situation. The 30 October 2026 H1 results are the key test. Sustained positive half-year EBITDA, stable net debt and covenant compliance at end-2026 would validate the turnaround thesis. A relapse into H1-style losses would point to further dilutive capital needs.
All figures in EUR. Fiscal year ends 31 December. "Derived" denotes analyst computation from disclosed figures. Empty table cells and "not publicly disclosed" mean the item was not available in the public sources reviewed (company press releases FY2017–H1 2026 filed with the AMF, governance and AGM releases, and Euronext and data-aggregator quotes) as of 19 October 2026.
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansExecutive Leadership
Board of Directors
| Director | Role | Appointed | Background | Independence |
|---|---|---|---|---|
EMC Surface Technologies Limited, represented by Jim (James) Clarke | Managing Director (CEO) and Chairman | Mandate in place before Nov 2025 (exact date not disclosed); confirmed CEO and Chairman Nov 2025 | Represents the largest shareholder group (EMC 36.9% plus personal 18.6%, i.e. 55.5% combined). A "James Clarke" who founded Clarke Energy (UK, 1989) appears in insider databases (Zonebourse/MarketScreener), but the link to COIL's Jim Clarke is not confirmed. | Not independent (controlling shareholder) |
CBP Holding, represented by Patrick Chassagne | Non-Executive Director | 20 Nov 2025 | Background not disclosed in the release | Not stated |
Christopher Clarke | Non-Executive Director | 20 Nov 2025 | More than five years in surface engineering; Member of the Institute of Materials Finishing (MIMF); MBA, Alliance Manchester Business School; non-practising solicitor (LLM, University of Law). Any family relationship to Jim Clarke is not disclosed. | Not stated |
Executive Leadership Team
| Name | Title | Tenure | Background |
|---|---|---|---|
Jim Clarke (via EMC Surface Technologies Ltd) | CEO and Chairman | CEO since late 2025 | See above |
Jan Robeyns (via J2Fix BV) | Managing Director (day-to-day operations); investor relations contact | Managing Director since 16 Oct 2025; sole MD since 29 May 2026 | Long-serving COIL manager. With Schroyen, credited with more than 40 years of combined experience in the company and in anodising. |
Marc Grocott | Fractional CFO | Appointed around Jan 2026 | CIMA-qualified accountant; finance and operations experience in industrial settings, including anodising-related activities |
Jean Schroyen (via SIMAC Solutions BV) | Former Managing Director | 16 Oct 2025 – 29 May 2026 | Long-serving COIL manager; all functions ended with immediate effect on 29 May 2026 |
Timothy (Tim) Hutton (via FMI NV) | Former CEO (Administrateur délégué) | At least 2006 – 16 Oct 2025 | Described by De Tijd as a Canadian executive and shareholder. Led the 2015–2017 investment programme and the dividend policy. |
Board & Management Changes
| Date | Change | Context |
|---|---|---|
16 Oct 2025 (announced 24 Oct) | FMI/Hutton contract terminated; Schroyen and Robeyns named MDs | Governance reshaped to speed up the turnaround after the Oct 2025 capital raise |
20 Nov 2025 (announced 24 Nov) | Hutton removed as director; Chassagne (CBP Holding) and Christopher Clarke join; Jim Clarke confirmed CEO and Chairman | New majority shareholder takes control of governance |
Jan 2026 | Marc Grocott appointed Fractional CFO | Gives the new board finance visibility |
29 May 2026 (announced 5 Jun) | Jean Schroyen's mandate ended with immediate effect | No reason given; Jan Robeyns continues as sole MD |
Major Shareholders
| Shareholder | Shares before | % before | Shares after | % after |
|---|---|---|---|---|
EMC Surface Technologies Ltd | 990,164 | 35.5 | 1,990,164 | 36.9 |
Jim Clarke (personal) | 0 | 0 | 1,000,000 | 18.6 |
Finance and Management International NV (Hutton) | 972,993 | 34.8 | 972,993 | 18.0 |
Jean Schroyen | 15,000 | 0.5 | 315,000 | 5.8 |
Jan Robeyns | 0 | 0 | 300,000 | 5.6 |
Public / free float | 814,230 | 29.2 | 814,230 | 15.1 |
Total | 2,792,387 | 100 | 5,392,387 | 100 |
Competitive Landscape
Key Competitors
| Competitor | Segment overlap | Positioning vs. COIL |
|---|---|---|
Unnamed new entrant in European continuous anodising (2023) | Tolling (direct) | Took tolling share from 2023; price competition |
Alanod GmbH (Germany) | Continuous coil anodising, mainly technical and reflective surfaces for lighting and solar | Specialist in reflective and technical surfaces; less architectural |
Almeco Group (Italy) | Anodised and coated aluminium coil for reflective and technical uses | Technical niche |
Batch anodisers (numerous regional players across Europe) | Batch anodising of sheet and panels | Fragmented, local, flexible on small lots |
Novelis | Rolled products, including coated and finished architectural coil | Also a potential tolling customer (rolling mill) |
Constellium | Rolled products | Potential customer / competitor in finished coil |
Speira (formerly Hydro Rolling) | Rolled products, coated coil | Potential customer / competitor |
Hydro (Building Systems) | Architectural aluminium systems and finishing | Competes for façade specification |
3A Composites (Alucobond) | ACM façade panels | Substitute product, including anodised-look finishes |
Arconic (Reynobond) | ACM and architectural panels | Substitute product |
Chinese continuous anodisers | Asia | Low-cost competition in Asia; the reason COIL chose a licensing route |
Competitor Detail
| Metric | COIL FY2025 |
|---|---|
Revenue (EUR Mn) | 19.4 |
Revenue growth (%) | -19.6 (total) / -12.4 (sales) |
EBITDA margin (%) | -5.8 |
Net margin (%) | -24.2 |
Recent Developments
This register includes every material development identified in public sources for the period.



