Company ProfilePremium

Hulamin Limited

Company Profile Analysis

Ticker: HLM.JO

ESOMAR 23 Corporate BadgeISO Certifications Badge
Hulamin Limited - Company showcase

Year Founded & Workforce

1935

1,722 Employees

Hulamin Limited logo

Hulamin Limited Employee Contacts

We don't hold contact details for this company yet — you can request them.

Request Employee Contacts

Hulamin Limited Overview

Hulamin is South Africa's only integrated aluminium rolling business and the sole primary aluminium rolling operation in sub-Saharan Africa. It is a mid-stream semi-fabricator. It buys primary metal (largely from South32's Hillside smelter in Richards Bay) and recycled scrap, casts rolling slab, and hot- and cold-rolls it into high-specification flat products: beverage canbody stock, can-end and tab stock, heat-treatable plate, coated and painted sheet, and general-engineering coil. Packaging accounts for roughly 61% of continuing revenue (FY2025), and slightly over half of revenue is sold domestically, with the remainder exported to more than 50 countries, principally North America and Europe. After a three-year, approx. R500m wide-canbody capacity programme, completed in July 2025, and the 2025–2026 exit of its non-core extrusions and foil-container businesses, Hulamin is now a pure-play rolled-products company. Its investment case rests on displacing canbody imports, ramping to a 200,000t annualised run-rate, and repairing a stretched balance sheet.


Company's own description (FY2025 AFS, Directors' Statutory Report — paraphrased)

Hulamin describes itself as a leading, focused, mid-stream aluminium semi-fabricator. It purchases primary aluminium and supplies high-value, niche rolled products and complex extrusions to manufacturers of finished products in South Africa and over 50 countries. Aluminium rolling contributes more than 80% of revenue, with the balance historically from extruded and other downstream products. On continuing operations, 54% of FY2025 revenue was sold locally and the remaining capacity was allocated to export markets. Following the July 2026 disposal of Hulamin Extrusions, the extruded-products element of this description is now historical.

What the company does — independent characterisation

Hulamin converts aluminium metal into flat-rolled products (FRP). It does not smelt aluminium. Its value chain position is:

  1. Metal procurement. Primary aluminium is procured as molten metal and solid ingot, chiefly from South32's Hillside smelter in Richards Bay. Hillside has 720kt/year capacity and sells approx. 30% of output to local downstream users, including Hulamin (Business Day, 29 April 2026; Mining Weekly, 8 May 2026). Recycled inputs include process scrap and used beverage cans (UBC). Hulamin had 15kt of UBC capacity running at approx. 80% utilisation in FY2025 (FY2025 AFS).

  2. Casting. Rolling slab is cast at the Pietermaritzburg casthouse and at the rolling-slab casting facility in the Bayside casthouse, Richards Bay. Hulamin bought the Bayside slab business from its Isizinda Aluminium joint venture in 2020 and took Isizinda to 100% ownership in 2024.

  3. Rolling. Slab is hot-rolled into hotband, then cold-rolled into finished gauges. The cold mill was widened in July 2025 to produce wide-width canbody coil.

  4. Finishing. Finishing steps include coil coating (lacquering of can-end and tab stock, including chrome-free pre-treatment qualified for European customers), heat-treatment and stretching of plate, slitting, and painting.

  5. Sales. Products are sold to can makers, plate distributors and fabricators, automotive and transport component makers, and general-engineering customers.

Business and revenue model

Product vs. service vs. subscription/licensing: Revenue is overwhelmingly product sales. FY2025 continuing revenue was R13,048.8m, of which "cost of services provided" was only R113.7m, indicating a minor services component such as tolling and processing. There is no subscription or licensing revenue.

Pricing mechanics: Selling prices are set as a pass-through of the US dollar LME aluminium price, plus regional metal premia, plus a conversion (rolling) margin. This creates two earnings sensitivities that management highlights at every results presentation:

  • Metal price lag (MPL): a timing gain or loss between metal purchase and product sale. MPL was a R303m gain in H1 2026, versus a R36m loss in H1 2025.

  • ZAR/USD exchange rate: export conversion margins are dollar-linked while the cost base is in rand. The 11% rand strengthening in H1 2026, to an average of R16.41/$, was the main drag on normalised earnings.

Normalised metrics: Management assesses performance on "normalised" EBITDA, EBIT and HEPS, which strip out MPL and non-trading items. These are non-IFRS measures.

Working-capital intensity: Net working capital runs at approx. 46–48% of revenue (H1 2025: 46%; H1 2026: 48%, headline table). This makes the balance sheet highly sensitive to LME moves. A roughly $1,000/t rise in LME from June 2025 to the 2026 peak inflated inventory and receivables, according to CFO commentary reported by Engineering News on 3 August 2026.

Customer types and end-markets (continuing operations)

End-market (ZAR Mn)FY2024FY2025
Packaging revenue (ZAR M)7,715.88,019.4
General engineering revenue (ZAR M)4,090.14,055.8
Automotive and transport revenue (ZAR M)950.8852.0
Building and construction revenue (ZAR M)61.399.5
Other revenue (ZAR M)0.622.1
Total continuing revenue (ZAR M)12,818.613,048.8

Source: FY2025 AFS, note 2.1(b). FY2024 re-presented: Packaging (61.5% of FY2025 continuing revenue): Canbody stock, can-end stock and tab stock for beverage cans, plus foil stock. Domestic can-making customers are South Africa's four can makers: Nampak Bevcan, GZ Industries, Kingsley Benoni and Golden Era (Financial Mail, 6 November 2025). Three of the four were fully commercialised on wide canbody by H1 2026.

General engineering (31.1%): Heat-treatable plate (sold heavily into North America and Europe), common-alloy cold-rolled "standards", tread plate, hotband and painted products.

Automotive and transport (6.5%): Rolled products for vehicle and transport applications.

Customer concentration: Revenue from external customers each contributing 10% or more of group revenue totalled R3.4bn in FY2025 (FY2024: R4.9bn). This implies one or more customers account for about a quarter of revenue (FY2025 AFS, note 2.1).

Strategy

Stated strategic themes (FY2025 AFS, H1 2026 interim, results presentations — paraphrased)

  1. Market-driven growth in can. Capture the growing South African beverage-can market. The aim is to displace imported wide canbody and protect the can stream; about 54% of new capacity is allocated to local can markets (Financial Mail, April 2026).

  2. Operational excellence and reliability. Reach and sustain the upgraded plant's design run-rate: 550t/day core-stream ambition, targeted by end-Q4 2026, implying a 200,000t annualised capacity. Raise capacity utilisation above 85%.

  3. Portfolio simplification. Exit non-core operations (Containers 2025; Extrusions 2026) to focus on Rolled Products.

  4. Liquidity and balance-sheet repair. Reduce net debt to "acceptable levels" by end-2026 through disposal proceeds, inventory and debtor optimisation, and minimal non-critical capex.

  5. Cost competitiveness. Align the cost base to global benchmarks; an additional R100m cost reduction targeted for H2 2026.

  6. Circularity and decarbonisation. Increase scrap and UBC utilisation (22% in FY2024; target above 27%); renewable power via wheeling from 2028; maintain the SBTi-validated 2030 target.

  7. Export market re-positioning. Compliance-driven exports (chrome-free can-end for the EU) and new plate routes in Europe and North America.

  8. "Unlocking value by 2027." This is the overarching medium-term objective referenced in the FY2025 AFS going-concern note.

Strategic initiatives register (last 24 months)

InitiativeStatus / timingTarget / metricSource
Wide canbody capital programme (approx. R500m, three phases)Phases 1–2 in 2024; Phase 3 mill widening July 2025; commercial readiness Q1 2026; 3 of 4 SA can makers commercialised by H1 2026Displace about 23kt/year of imports; increase local can shareSENS, 8 August 2025; H1 2026 interim
Core-stream ramp-up527t/day in June 2026 versus 550t/day ambition550t/day by end-Q4 2026H1 2026 interim; Quartr summary
200,000t annualised productionRamp under way200kt by 2027, about 60% can streamFinancial Mail, 6 November 2025
Operational restructure and remediation roadmapImplemented H2 2025 – H1 2026; R9m restructuring cost in H1 2026Plant reliability, quality and accountabilityH1 2026 interim
Containers closureCompleted 6 June 2025 (R15m restructuring cost in H1 2025)Simplify foil mix; release working capitalH1 2025 interim; FY2025 AFS
Extrusions disposalEffective 1 July 2026Up to R100m proceeds (cash plus consignment stock)SENS, 24 April 2026; H1 2026 interim
Net-debt reduction programmeH2 2026R223m of identified mitigating cash flows (Extrusions about R100m, Containers R13m, inventory R60m, debtors R50m)H1 2026 interim note 10
Cost reduction programmeH2 2026Additional R100mH1 2026 presentation (Quartr)
Scrap / UBC expansionOngoingUBC capacity to 28kt (about R200m capex, FY2026 plan as stated in 2024); scrap utilisation above 27%Business Day, August 2024; Quartr H1 2026
Power Purchase Agreement (electricity wheeling)Signed in FY2025; commences 2028Lower-cost renewable power; carbon credits to help with EU CBAMFY2025 AFS note 1.7(a); Financial Mail, April 2026
Chrome-free lacquer for EU can-endQualification trials completed in FY2025Secure EU can-end complianceFY2025 AFS
Trade-remedy advocacyOngoingAdditional SA anti-dumping duties and safeguards against low-priced (notably Chinese) importsFY2025 AFS note 1.7(b), (d)
Capex mix shift to stay-in-businessFrom H2 2026No material commitments to new strategic capacity; R170m outstanding commitments relate to wide-canbody close-out and reliabilityH1 2026 interim note 7
BEE strategy reviewUnder evaluation after scheme maturityRestore BEE ownership credentialsSENS, 27 March 2026; H1 2026 note 2(e)

Management guidance and medium-term targets

H2 2026: Convert operational recovery into cash. Reduce net debt to acceptable levels by year-end. Realise improved can-end pricing and margins as legacy back-orders unwind. Increase wide-canbody volumes. Further improve can-end production.

Medium term: 200kt annualised production by 2027. Utilisation above 85%. Higher-margin can mix. Cost base aligned to global benchmarks (Financial Mail, 30 April 2026).

Formal numerical earnings or EBITDA guidance: is not provided. Hulamin issues JSE trading statements when earnings move by more than 20%.

Products & Services

Hulamin does not publish SKU-level pricing. Launch years are given only where disclosed.

Hulamin Rolled Products (continuing — the entire go-forward business)

Product lineDescription and capabilityTarget customers / end-useLatest development / yearNotes
Canbody stock (CBS) — narrow widthCold-rolled coil for drawn-and-ironed beverage can bodies; high scrap-absorption stream (supports UBC recycling)South African can makers (Nampak Bevcan, GZ Industries, Kingsley Benoni, Golden Era); export can makersLong-establishedHulamin held about 60% of SA canbody stock supply (Engineering News, March 2025) and supplies up to 70,000t of CBS domestically (Financial Mail, November 2025)
Wide canbody stock (flagship new offering)Wide-width CBS coil from the widened cold rolling mill. Displaces about 23,000t/year of imports; 7 of 9 SA can lines are designed for wide coilSA can makers adding capacity (a new 15,000t wide-body line, per Engineering News, March 2025)Phases 1–2 in 2024; Phase 3 (mill widening) July 2025; qualification H2 2025 to Q1 2026; 3 of 4 SA can makers fully commercialised by H1 2026Core of the approx. R500m strategic capex programme (SENS, 8 August 2025)
Can-end stock (CES)Lacquered coil for beverage can ends; coil-coated on Hulamin linesDomestic and export can-end makers (EU a key export market)Chrome-free lacquer pre-treatment qualification completed for European customers in 2025 (FY2025 AFS)About 50,000t produced, of which about 40,000t exported (Financial Mail, November 2025). Domestic CES faces low-priced imports of finished ends. H1 2026 volume down about 30%; production reached 120t/day in June 2026
Tab stockCoil for beverage can pull-tabs, produced on coil coating linesCan-end makersCoil Coating Line 2 (export can-end and tab) fire on 24 June 2024; repaired by mid-September 2024High-margin export stream
Closure sheetSheet for closures (caps)Packaging closure manufacturers—Listed in third-party product descriptions (Börse Stuttgart / S&P profile)
Heat-treatable (heat-treated) plateThick plate in heat-treatable alloys, solution-treated and stretchedMachine and mould building, semiconductor and vacuum-chamber equipment, pneumatics, electrical, automotive, defence (Business Report, August 2024); distributors in North America and EuropeExpanded routes to market in Europe and North America (H1 2026)H1 2026 plate sales up more than 8% despite 50% US tariffs; record domestic plate volumes in FY2024
Cold-rolled "standards" / common-alloy sheet and coilGeneral-purpose sheet and coil in common alloysFabricators, building, general engineering, export distributors—Faced EU export pricing pressure in FY2024. Subject to the US anti-dumping order on common-alloy aluminium sheet (Hulamin individual margin zero in recent reviews)
Bright tread platePatterned, bright-finish plateTransport flooring, trailers, industrial flooring—Listed in third-party product descriptions
Superior-finish painted and clad productsPre-painted and clad sheetBuilding and construction, transport, appliances—Listed in third-party product descriptions
Thin-gauge foil / foil stockThin-gauge rolled foilFoil converters; previously in-house containersFY2024 strategy: simplify foil mix and prioritise higher-margin export foil after the Containers exit (Business Report, March 2025)—
HotbandHot-rolled intermediate coil sold externallyThird-party cold rollersH1 2026: 7,025t (H1 2025: 490t) as excess casting and hot-rolling capacity was redirected to non-core hotbandLow margin; used to absorb fixed costs
Rolling slab casting (Isizinda, Richards Bay)Slab cast from Hillside liquid metal, adjacent to the smelterInternal supply to Pietermaritzburg rollingHulamin owns the slab business (2020) and 100% of Isizinda (2024)Secures metal supply
Recycling / UBC processingScrap separation, processing and remelt; 15kt UBC capacity at about 80% utilisation (FY2025)Internal input substitutionTarget of 28,000t UBC capacity with about R200m investment in FY2026 (Business Day, August 2024); scrap utilisation 22% (FY2024), target above 27% (H2 2026 guidance)Lowers metal cost and carbon intensity

Exited businesses (historical portfolio)

BusinessProductsStatus
Hulamin ExtrusionsSmall, large and complex extruded aluminium sections for building and construction, automotive, renewable energy (solar mounting) and general engineering; Pietermaritzburg plant plus Cape Town outlet; earlier Olifantsfontein (Gauteng) operations, whose property was sold in 2021Sold to Norsaf ERS (Pty) Ltd, effective 1 July 2026
Hulamin ContainersRigid aluminium foil containers for catering and household useCeased operations 6 June 2025; plant sold (R3.75m received); property transfer pending (R13m receivable)

Financial Narrative

Continuing operations income statement: notes and sources

Source: FY2025 AFS consolidated statement of profit or loss and note 2.1. FY2024 "other gains" include insurance proceeds of R70.0m for replaced plant (Coil Coating Line 2 fire) and a R17.5m remeasurement gain on the previously held Isizinda interest. Diluted EPS FY2024 appears as 73c on the face of the income statement and 74c in note 2.2; the discrepancy is in the source.

Half-year performance (continuing operations)

Source: H1 2026 unaudited interim report. Rolled products volumes include hotband of 7,025t (H1 2026) and 490t (H1 2025).

Data inconsistencies in the H1 2026 report

  • Cash generated from operations is R145.0m in the cash flow statement but R69m in notes 2(d) and 10.

  • Free cash flow is −R59m in the headline table but −R89m in note 2(d).

  • Debt-to-equity is 45% in the headline table but 52.0–52.2% in the notes.

These differences most likely reflect different definitions (cash from operations versus net operating cash flow, and net versus gross debt). Analysts should reconcile them with management.

Balance sheet

FY2023 total assets and equity: third-party (Investing.com/Google Finance), consistent with the FY2024 opening equity of R3,538.6m in the FY2025 AFS statement of changes in equity. FY2023 net debt is derived from the reported 24.5% net debt/equity ratio (Engineering News, March 2025). FY2021 net debt was R703m with cash of R149m (Engineering News, 28 March 2022).

Sources: FY2025 AFS; H1 2026 interim. H1 2026 net debt including leases, net current assets and current ratio are derived.

Debt structure. In October 2025 Hulamin converted its short-term working-capital borrowing into committed medium-term facilities. Total banking facilities at 31 December 2025 were R2.40bn: a committed working-capital facility of R1.6bn (extended three years), a new three-year term facility of R200m, and a general banking facility of R600m (R450m direct, R150m indirect letters of credit and guarantees). Four lenders participate. Covenants require net debt/equity below 0.60x and a current ratio above 1.25x. Committed facilities of R2.25bn mature on 31 October 2028. Undrawn committed facilities were R548m at 30 June 2026 (H1 2025: R658m). Utilisation of the working-capital facility is limited by eligible inventory and receivables, effectively a borrowing-base structure.

Conflicting covenant ratio. The FY2025 AFS reports net debt/equity as both 46.4% (note 1.7(a)) and 0.53x (note 1.7(c)). The latter is probably the covenant definition.

Cash flow

Source: FY2025 AFS cash flow statement (total group). "Free cash flow" is the company's definition: cash flow before financing activities.

FY2023 capex of R311m and its 35% increase are from SENS (4 March 2024). FY2022 is derived from that 35% increase. FY2023 cash generated from operations was R363m, up 503% (SENS, 4 March 2024). FY2021 free cash flow from operating activities was R239m (Business Report, March 2022).

Ratio analysis (derived, total group unless stated)

All ratios are analyst-derived from FY2025 AFS line items. The cash conversion cycle uses year-end balances, and group balances against continuing COGS, so treat it as approximate.

Commentary on trends, inflections and drivers

FY2021–FY2022: cyclical recovery. After losses in 2019–2020, Hulamin returned to profitability in FY2021. Volumes rose 34% to 222kt (209kt Rolled Products), local rolled sales grew 54% to 90kt, and the business benefited from newly imposed South African import duties on flat-rolled aluminium and very large MPL gains as LME prices hit 13-year highs. FY2022 revenue peaked at R15.9bn on higher LME prices and firm can-stock contract pricing. Normalised EBITDA reached R667m, the five-year high, even though reported profit nearly halved as MPL reversed.

FY2023: simplification under pressure. Softer global markets and a deliberate exit from low-margin hotband cut Rolled Products volumes 15% to 169,149t. Mix improved: local sales reached 51% of volume and can stock 51% of total volume. Normalised EBITDA held at R620m (−7%) thanks to a weaker rand, planned plant shuts and fixed-cost reductions. Operating cash flow rose sixfold to R363m.

FY2024: quality of earnings deteriorates. Revenue was flat. Normalised EBITDA fell 12% to R544m because export pricing pressure (EU standards and plate, export can stock) and the June 2024 coil-coating fire forced a weaker mix. Reported profit was propped up by MPL (R93m) and fire insurance proceeds (R70m). Capex more than doubled to about R639m for the wide-canbody programme. Combined with a R682m inventory build, this pushed free cash flow to −R512m and net debt from about R0.87bn to R1.35bn.

FY2025: inflection to loss. The planned 25-day integrated shutdown to widen the cold mill was executed on schedule. Post-restart mill stabilisation then failed: poor metal recoveries, quality deviations in canbody, and customer returns for reprocessing. Management had to sell excess metal inventory at the expense of margin to protect liquidity. Continuing gross margin compressed 3pp to 9.0%. Operating profit collapsed 79% to R119m and the group posted a R148m loss, including the R56m Extrusions impairment. Normalised EBIT interest cover fell below 1.0x and net debt/normalised EBITDA rose to about 6.5x. Working capital released R186m as receivables fell, but net debt still rose to R1.70bn.

H1 2026: operational recovery, earnings still weak. Plant performance was restored. The core-stream run-rate rose from 424t/day in H2 2025 to 527t/day in June 2026. Reported earnings surged (HEPS 79c) entirely because of R303m of MPL on a 33% higher LME. Underlying normalised EBITDA fell 37% to R177m. The causes were the stronger rand (−11% R/$), can-end volume down about 30%, back-orders fulfilled at prior-year prices, and depressed local can-end pricing. The balance sheet absorbed a further inventory build (+R396m) as LME rose. Net debt edged up to R1.70bn despite capex being halved.

Unlock Company Financials

Unlock this company profile to view its financial data.

View Subscription Plans

Financial Detail

Results by Segment and Segment Margins & Growth (%)

MetricFY2024FY2025

Rolled Products revenue (ZAR Mn)

12,818.613,048.8

Extrusions revenue - discontinued (ZAR Mn)

816.5737.5

Group revenue total (ZAR Mn)

13,635.113,786.3

Rolled Products operating profit (ZAR Mn)

574.3118.7

Extrusions operating profit/loss (ZAR Mn)

-33.9-66.1

Rolled Products profit before tax (ZAR Mn)

404.5-76.8

Extrusions profit before tax (ZAR Mn)

-33.9-66.2

Rolled Products normalised EBIT (ZAR Mn)

412.894.8

Extrusions normalised EBIT (ZAR Mn)

-33.9-9.8

Rolled Products normalised EBITDA (ZAR Mn)

555.1260.4

Extrusions normalised EBITDA (ZAR Mn)

-11.22.1

Rolled Products operating margin (%)

4.50.9

Rolled Products normalised EBITDA margin (%)

4.32.0

Extrusions operating margin (%)

-4.1-9.0

Rolled Products share of group revenue (%)

94.094.7

Extrusions share of group revenue (%)

6.05.3

Rolled Products capex incl. intangibles (ZAR Mn)

627.2584.0

Extrusions capex (ZAR Mn)

22.819.7

Results by Segment

MetricH1 2025H1 2026

Rolled Products revenue (ZAR Mn)

7,104.57,239.8

Extrusions revenue - discontinued (ZAR Mn)

351.1326.9

Rolled Products operating profit (ZAR Mn)

164.5395.4

Extrusions operating loss (ZAR Mn)

-66.8-10.8

Rolled Products normalised EBIT (ZAR Mn)

215.2101.8

Rolled Products normalised EBITDA (ZAR Mn)

281.9176.9

Rolled Products net profit (ZAR Mn)

42.7244.7

Revenue by Segment

Product marketH1 2025H1 2026

Packaging (ZAR Mn)

4,689.24,390.2

General engineering (ZAR Mn)

1,913.02,261.4

Automotive and transport (ZAR Mn)

454.6522.6

Building and construction (ZAR Mn)

46.735.7

Other (ZAR Mn)

1.029.9

Unlock Company Financials

Unlock this company profile to view its financial data.

View Subscription Plans

Income Statement and Margin Analysis (%)

MetricFY2021FY2022FY2023FY2024FY2025

Revenue total group (ZAR Mn)

13,01515,93013,79613,63513,786

Revenue growth YoY (%)

52.222.4-13.4-1.21.1

Operating profit total group (ZAR Mn)

53853053254053

Normalised EBITDA total group (ZAR Mn)

152667620544263

Net profit attributable (ZAR Mn)

592300272246-148

Headline earnings (ZAR Mn)

560305271196-89

Basic EPS (ZAR cents)

192978880-48

Basic HEPS (ZAR cents)

182998864-29

Basic normalised HEPS (ZAR cents)

821057742-36

Dividend per share (ZAR cents)

00000

Operating margin (%)

4.13.33.94.00.4

Normalised EBITDA margin (%)

1.24.24.54.01.9

Net margin (%)

4.51.92.01.8-1.1

Unlock Company Financials

Unlock this company profile to view its financial data.

View Subscription Plans

Income Statement and Margin Analysis (%) (FY2024–FY2025)

MetricFY2024FY2025

Revenue (ZAR Mn)

12,818.613,048.8

Cost of goods sold (ZAR Mn)

-11,188.3-11,754.7

Cost of services provided (ZAR Mn)

-86.6-113.7

Gross profit (ZAR Mn)

1,543.81,180.4

Selling marketing and distribution (ZAR Mn)

-418.8-286.1

Administrative and other expenses (ZAR Mn)

-734.1-783.1

Gains on trading financial instruments (ZAR Mn)

7.811.2

Other gains/losses (ZAR Mn)

178.1-3.8

Operating profit (ZAR Mn)

574.3118.7

Interest income (ZAR Mn)

3.21.1

Interest expense (ZAR Mn)

-172.3-196.6

Profit before tax (ZAR Mn)

404.5-76.8

Taxation (ZAR Mn)

-116.68.9

Net profit continuing (ZAR Mn)

287.9-67.8

Loss from discontinued operations (ZAR Mn)

-41.5-79.8

Net profit attributable total (ZAR Mn)

246.3-147.6

Metal price lag gain (ZAR Mn)

92.950.9

Depreciation and amortisation continuing (ZAR Mn)

142.3165.6

Normalised EBIT continuing (ZAR Mn)

412.894.8

Normalised EBITDA continuing (ZAR Mn)

555.1260.4

Employment costs Rolled Products (ZAR Mn)

1,441.71,494.8

Gross margin (%)

12.09.0

Operating margin (%)

4.50.9

Basic EPS continuing (ZAR cents)

93-22

Diluted EPS total (ZAR cents)

73-45

Basic HEPS continuing (ZAR cents)

77-21

Normalised HEPS continuing (ZAR cents)

55-28

Key Financials (USD) and Operating Metrics (tonnes)

MetricH1 2025H1 2026

Average LME aluminium (USD/t)

2,5393,382

Average exchange rate (ZAR per USD)

18.3916.41

Rolled products volumes (tonnes)

89,31585,383

Core sales mix (%)

7572

Revenue (ZAR Mn)

7,104.57,239.8

Gross profit (ZAR Mn)

746.4856.2

Normalised EBITDA (ZAR Mn)

281.9176.9

Normalised EBIT (ZAR Mn)

215.2101.8

Metal price lag (ZAR Mn)

-35.8302.7

Non-trading items (ZAR Mn)

-14.8-9.2

Operating profit (ZAR Mn)

164.5395.4

Net financing costs (ZAR Mn)

-97.3-77.6

Net profit continuing (ZAR Mn)

42.7244.7

Net profit total incl. discontinued (ZAR Mn)

-24.2233.9

Basic EPS continuing (ZAR cents)

1479

Basic HEPS continuing (ZAR cents)

1479

Normalised HEPS continuing (ZAR cents)

2610

Capital expenditure (ZAR Mn)

274128

Free cash flow (ZAR Mn)

-258-59

Net debt excl. leases (ZAR Mn)

1,5911,702

Effective tax rate (%)

36.525.5

LTIFR (rate)

0.140.07

Balance Sheet and Margin Analysis (%)

MetricFY2023FY2024FY2025

Total assets (ZAR Mn)

6,2477,2917,453

Total equity (ZAR Mn)

3,5393,7883,668

Net debt incl. leases (ZAR Mn)

8671,3501,701

Net debt to equity (%)

24.535.646.4

Unlock Company Financials

Unlock this company profile to view its financial data.

View Subscription Plans

Balance Sheet and Financial Ratios (x)

Balance sheet line (ZAR Mn)FY2024FY2025H1 2026

Property plant and equipment (ZAR Mn)

1,860.32,187.42,262.6

Right-of-use assets (ZAR Mn)

20.150.847.3

Intangible assets (ZAR Mn)

67.082.380.0

Goodwill (ZAR Mn)

1.41.41.4

Inventories (ZAR Mn)

3,788.93,859.14,316.7

Trade and other receivables (ZAR Mn)

1,414.0938.91,128.5

Cash and cash equivalents (ZAR Mn)

21.859.8140.1

Assets held for sale (ZAR Mn)

31.9119.122.6

Total assets (ZAR Mn)

7,291.17,452.98,128.5

Non-current borrowings (ZAR Mn)

0.01,620.81,841.8

Current borrowings (ZAR Mn)

1,277.20.00.0

Bank overdraft (ZAR Mn)

72.386.00.0

Lease liabilities total (ZAR Mn)

21.954.250.6

Trade and other payables (ZAR Mn)

1,886.41,737.32,011.3

Retirement benefit obligations (ZAR Mn)

216.2215.0231.2

Total liabilities (ZAR Mn)

3,503.63,784.44,244.5

Total equity (ZAR Mn)

3,787.53,668.43,883.9

Net borrowings excl. leases (ZAR Mn)

1,3281,6471,702

Net debt incl. leases (ZAR Mn)

1,349.51,701.21,752.4

Net current assets (ZAR Mn)

1,950.33,158.73,599.5

Current ratio (times)

1.62.72.7

Cash Flow

MetricFY2024FY2025

Cash generated from operations (ZAR Mn)

290.4514.8

Interest paid (ZAR Mn)

-185.7-195.7

Income taxes paid (ZAR Mn)

-62.5-40.4

Net cash from operating activities (ZAR Mn)

45.4279.8

Capex PPE (ZAR Mn)

-630.2-570.9

Capex intangibles (ZAR Mn)

-8.9-15.0

Free cash flow company definition (ZAR Mn)

-512.3-303.1

Working capital change (ZAR Mn)

-391.4185.7

Dividends paid (ZAR Mn)

00

Share buybacks (ZAR Mn)

00

Cash Flow (FY2022–FY2025)

MetricFY2022FY2023FY2024FY2025

Capital expenditure total group (ZAR Mn)

230311639586

Returns & Leverage Ratios (%) and Financial Ratios (x)

RatioFY2024FY2025

Return on average equity (%)

6.7-4.0

Return on average assets (%)

3.6-2.0

ROIC normalised EBIT after 27% tax on equity plus net debt (%)

5.41.2

Current ratio (times)

1.62.7

Gross debt incl. leases to equity (%)

36.248.0

Net debt to normalised EBITDA (times)

2.56.5

Normalised EBIT interest cover (times)

2.20.4

Reported operating profit interest cover (times)

3.10.3

Asset turnover revenue to average assets (times)

2.01.9

Inventory days on continuing COGS (days)

124120

Receivable days on continuing revenue (days)

4026

Payable days on continuing COGS (days)

6254

Cash conversion cycle (days)

10292

Region Overview

RegionFY2025 revenue (ZAR Mn)Share (%)

South Africa

7,005.253.7

Europe

2,592.319.9

North America

2,341.517.9

South America

485.63.7

Asia

299.62.3

Australasia

254.41.9

Middle East

68.30.5

Rest of Africa

1.90.0

Total continuing

13048.8

100.0

Revenue by Region

RegionH1 2025H1 2026

South Africa revenue (ZAR Mn)

3,882.14,167.1

North America revenue (ZAR Mn)

948.21,664.9

Europe revenue (ZAR Mn)

1,664.51,149.8

Asia revenue (ZAR Mn)

144.3174.0

Middle East revenue (ZAR Mn)

36.928.3

Australasia revenue (ZAR Mn)

150.354.1

South America revenue (ZAR Mn)

278.31.6

Rest of Africa revenue (ZAR Mn)

0.00.0

Region

H1 2026 YoY growth (%)

—

North America

75.6—

Asia

20.6—

South Africa

7.3—

Middle East

-23.4—

Europe

-30.9—

Australasia

-64.0—

South America

-99.4—

Share Price & Returns

Reference pointPrice (ZAR)Source

Listing, June 2007 (first trade)

32.00 (settled near 40)

Mail & Guardian

14 October 2020

1.28

Business Day

14 October 2021 (intraday high)

4.43

Business Day

6 March 2023

2.82

Business Day

14 August 2023

2.88

Business Report

20 August 2024 (close)

3.98

Business Day

26 February 2026

2.15

Simply Wall St

21 August 2026

2.06

Investing.com

7 October 2026 (Stuttgart, EUR)

0.104–0.108 (approx. ZAR 2.0–2.1 equivalent)

Börse Stuttgart

Change by Period

PeriodChangeComment

1-year

Conflicting third-party data

Fintel showed −16.1% (to June 2026); Börse Stuttgart showed +8.3% (to August 2026). Status: flat to modestly negative

3-year (August 2023 to August 2026)

About −28%

R2.88 to about R2.06

2-year (August 2024 to August 2026)

About −48%

R3.98 to R2.06

5-year (October 2021 to October 2026)

About −53%

Measured from the October 2021 spike, so it overstates the decline

6-year (October 2020 to October 2026)

About +61%

Measured from October 2020

Valuation Multiples

MultipleHulaminBasis

P/E (LTM headline earnings, continuing)

approx. 4.9x

LTM headline earnings about R137m (FY2025 −R65.3m + H1 2026 R244.6m − H1 2025 R42.7m)

P/E (LTM total net profit)

approx. 6.0x

LTM net profit about R110m

EV / EBITDA (LTM reported, continuing)

approx. 4.6x

EV about R2.42bn (market cap + net debt incl. leases R1.75bn); LTM EBITDA about R524m including MPL

EV / normalised EBITDA (LTM)

approx. 15.6x

LTM normalised EBITDA about R155m

EV / Sales (LTM)

approx. 0.18x

LTM continuing revenue about R13.18bn

P / B

approx. 0.17x

Equity R3,884m (30 June 2026)

Capital Markets

MetricFY2021FY2022FY2023FY2024FY2025

Dividend per share (ZAR cents)

00000

Share buybacks (ZAR Mn)

00000

Debt Facilities

FacilityAmountMaturity

Committed working-capital facility

R1.6bn

October 2028 (extended three years in October 2025)

Term facility

R200m

Three years from October 2025

General banking facility

R600m (R450m direct; R150m indirect)

Not disclosed (typically annual or on demand)

Total committed facilities

R2.25bn

31 October 2028

Drawn at 30 June 2026

Non-current borrowings R1,841.8m; undrawn committed R548m

—

Analyst Conclusions

Management guidance (H1 2026 interim, 3 August 2026)

Production: Core-stream run-rate of 550t/day by end-Q4 2026, from 527t/day in June. Can-end production to improve further in H2.

Commercial: Wide-canbody volumes to rise. Improved can-end pricing and margins as legacy prior-year-priced orders roll off.

Financial: Convert operational recovery into cash. Reduce net debt to acceptable levels by year-end 2026 through about R223m of identified actions. Additional R100m of cost reduction. Capex shifting to stay-in-business.

Medium term: 200kt annualised by 2027; utilisation above 85%; "unlocking value by 2027."

Consensus expectations

Not meaningfully available: one covering analyst, and no published consensus EPS or revenue growth figures were identified. The average target of R3.80 implies about 85% upside to R2.06.

Bull case

  1. Operating leverage on a fixed-cost base. Moving from about 169kt (FY2025, derived) to a 200kt run-rate with a richer can mix could lift normalised EBITDA back towards the FY2022–FY2023 range of R620–667m. At an EV of about R2.4bn, that implies an EV/normalised EBITDA of about 3.6–3.9x.

  2. Structural domestic moat strengthening. Wide-canbody qualification with three of four SA can makers plus about 23kt of local can capacity additions provide a visible, tariff-protected volume pipeline.

  3. Deep asset discount. At about 0.17x book and about 0.18x EV/sales, the market prices in distress. Delivering the R223m H2 2026 cash plan and a lower capex profile could re-rate the equity as net debt/equity falls.

Bear case

  1. Earnings quality is poor. H1 2026 HEPS of 79c was almost entirely MPL. Normalised HEPS fell 62% to 10c. If LME prices reverse, MPL turns negative just as underlying margins remain thin, at a normalised EBITDA margin of about 2.4% in H1 2026.

  2. Leverage plus working-capital procyclicality. Net debt of about R1.7bn against LTM normalised EBITDA of about R155m (more than 10x) leaves the balance sheet hostage to LME spikes inside a borrowing-base facility. Covenant headroom (52% versus 60% on the note-basis measure) is limited.

  3. Execution and governance risk. Two consecutive years of operational disruption (2024 fire, 2025 restart failure) and a fractured board (chair removed and resigned, independence gaps, remuneration dissent) undermine confidence in delivery. Meanwhile, rand strength, the 50% US tariffs and can-end imports are outside management's control.

Key catalysts and monitorables (next 12 months)

Catalyst / monitorableExpected timingWhat to watch
Achievement of 550t/day core-stream run-rateQ4 2026Monthly output disclosures; can-end recovery to benchmark
FY2026 trading statementExpected December 2026 – March 2027Normalised HEPS trajectory versus FY2025's loss
Year-end net debt versus "acceptable levels"31 December 2026Realisation of Extrusions consignment stock (by November 2026) and the R13m Containers property; inventory and debtor release
FY2026 results and 2027 targetsAbout March 2027Normalised EBITDA; FCF turning positive; dividend stance
Permanent chair appointment and board refreshH2 2026 – H1 2027Independence restored; industry expertise
BEE share repurchase and cancellation; new BEE strategyH2 2026Share count change; BEE rating outcome
SA trade-remedy decisions (anti-dumping / safeguards on Chinese FRP and can-ends)OngoingCan-end pricing recovery
US tariff policy changes (Section 232)OngoingNorth American plate margins
Hillside post-2031 power arrangementOngoing (deal targeted around 2029)Long-term metal supply security
LME and ZAR/USDContinuousMPL and working-capital swings

Concluding analyst verdict

Hulamin is a strategically important but financially fragile asset. Its strategic position is genuinely differentiated. As sub-Saharan Africa's only primary aluminium roller, sitting beside a 720kt smelter and holding about 60% of a growing, tariff-protected domestic canbody market, it has just completed the capacity investment needed to displace imported wide coil. The July 2026 exit of Extrusions leaves a clean, single-segment rolled-products company whose operational problems from 2025 appear substantially fixed: the core run-rate reached 527t/day in June 2026, close to the 550t/day design ambition.

The financial picture is far weaker. Underlying profitability is at a cyclical and structural low. Normalised EBITDA has more than halved since FY2023, and H1 2026's headline earnings surge was almost entirely metal-price-lag accounting. Net debt of about R1.7bn is very high relative to normalised earnings. Because the working-capital facility is effectively a borrowing base, every LME rally that flatters revenue also absorbs cash. Free cash flow has been negative for three consecutive reporting periods. Governance has deteriorated: the chair was removed and then resigned within about a year, only half the board is independent, and shareholders signalled discontent on pay.

The equity therefore behaves like a leveraged option on three variables: (i) execution of the ramp to about 200kt with a richer can mix, (ii) can-end price normalisation, and (iii) a weaker rand. At about 0.17x book and a low single-digit multiple of mid-cycle EBITDA, the market is discounting substantial risk of failure. Delivery against the H2 2026 deleveraging plan and FY2026 normalised EBITDA visibly above R400m would justify a material re-rating toward the sole analyst's R3.80 target. Another operational stumble, a sharp LME reversal or sustained rand strength would keep the shares trapped near distressed valuations.

Stance: speculative recovery, with high risk. The investment case hinges on H2 2026 cash conversion and board stabilisation. Position sizing should reflect binary execution outcomes.


Company filings (JSE SENS)

Regulatory

Media and secondary sources

Unlock Company Financials

Unlock this company profile to view its financial data.

View Subscription Plans

Executive Leadership

Executive Leadership Team

NameTitleTenurePrior roles / backgroundEducationAgeCompensation

Meganathan (Mark) Gounder

Chief Executive Officer and Executive Director

CEO since 1 December 2023; CFO 1 April 2021 – November 2023

As CFO, led an enterprise-wide transformation programme focused on streamlining processes (SENS, 10 October 2023)

Not disclosed in reviewed sources

Born 1975 (third-party, Yahoo/S&P)

FY2024 total approx. R10.12m, about 48% salary and 52% bonus/share-linked (third-party, S&P via Simply Wall St); FY2023 approx. R8m. Direct holding approx. 0.11%

Pravashni Nirghin

Chief Financial Officer and Executive Director

Joined 2022 from Vodacom (various senior finance roles); earlier Head of Financial Reporting / interim CFO; elected director at the May 2025 AGM

Vodacom finance

CA(SA)

——

BA (Ayanda) Mngadi

Group Executive: Corporate Affairs and Investor Relations

—

Stepped down from a board committee in December 2024 (S&P summary)

—

Born 1975 (third-party)

—

Marlene Janneker

Group Executive: Human Capital

———

Born 1972 (third-party)

—

“—” = not publicly disclosed.

Board of Directors

DirectorRoleIndependenceNotes

Linda Yanta

Interim Chairman (from 6 July 2026); member of audit committee; interim chair of nominations and governance committee

Independent NED

Chaired the audit committee during FY2025 (100% attendance)

Vusi N Khumalo

Non-executive director; interim chair of audit committee (from 6 July 2026)

Not marked independent in the H1 2026 directorate list

Permanent invitee to the audit committee in FY2025. Governance flag: the Companies Act requires audit committee members to be independent NEDs. Verify his classification

Dr B Mehlomakulu

Non-executive director; audit committee member (FY2025)

Independent NED

Long-serving (on board since at least 2019)

Zanele Monnakgotla

Non-executive director; interim chair of remuneration and HR committee; member of nominations and governance and audit committees

Independent NED

Appointed to audit committee subject to AGM approval in 2026

Dr Andreas Tostmann

Non-executive director

Independent NED

CEO of Lynius GmbH (Munich); former Volkswagen executive board member for Production; former CEO of MAN Truck & Bus

Geoff H M Watson

Non-executive director

Non-independent (former interim CEO)

Interim CEO 1 October 2022 – 30 November 2023

Mark Gounder

CEO

Executive

—

Pravashni Nirghin

CFO

Executive

—

Major Shareholders

RankHolderStake (%)SharesSource / date
1

Industrial Development Corporation of SA (IDC) — state-owned

29.17 (company register, 31 December 2025); 30.2 (aggregator)

approx. 94.6m

Profile's Stock Exchange Handbook 2026 Issue 2; Simply Wall St

2

Volker Schütte (private investor)

8.48

26.6m

Simply Wall St (S&P)

3

John Biccard (private investor / fund manager)

5.29

16.6m

Simply Wall St (S&P)

4

Hulamin Operations (Pty) Ltd — treasury shares

5.05

15.8m

Simply Wall St (S&P)

5

Ninety One UK Ltd

4.37

13.7m

Simply Wall St (S&P)

6

Camissa Asset Management

3.09

9.7m

Simply Wall St (S&P)

7

Anchor Capital

1.33

4.2m

Simply Wall St (S&P)

8

Flagship Private Asset Management

1.02

3.2m

Simply Wall St (S&P)

9

Efficient Select

0.85

2.7m

Simply Wall St (S&P)

10

Instit (Pty) Ltd

0.62

1.9m

Simply Wall St (S&P)

Competitive Landscape

Competitors by Segment

SegmentKey competitorsPositioning versus Hulamin

Beverage canbody stock

Novelis (Hindalco group), Constellium, Speira, Gulf Aluminium Rolling Mill (GARMCO, Bahrain), Ma'aden rolling operations (Saudi Arabia), Chinese can-stock rollers (for example Nanshan Aluminium, Henan Mingtai), UACJ (Japan / Thailand), Assan Alüminyum (Turkey), Hindalco (India)

Hulamin holds about 60% of SA CBS supply and is the only local producer. Imports, especially of wide coil, supply the balance. Global majors have far greater scale and wide-mill capability

Can-end and tab stock

Novelis, Constellium, Speira, Elval (ElvalHalcor), Chinese rollers

Hulamin exports about 80% of its about 50kt can-end output, mainly to the EU. Domestic can-end faces low-priced imports of finished ends

Heat-treatable plate

Constellium, Kaiser Aluminum (US), Arconic, AMAG (Austria), Chinese plate producers

Hulamin is a niche plate supplier growing in North America and Europe despite tariffs

Common-alloy sheet / standards

Elval, Assan, Chinese and Indian rollers, Gulf producers

Commoditised and subject to US anti-dumping orders (Hulamin individual margin zero)

Domestic SA market (all FRP)

Imports from China, the Middle East, Europe and Asia; no local primary rolling competitor

Hulamin relies on SA import duties on flat-rolled aluminium and seeks further anti-dumping and safeguard measures

Peer Comparison FY2024

CompanyLatest FY revenueRevenue growthAdj. EBITDA marginNotes

Hulamin (FY2025, continuing)

ZAR 13.05bn (about USD 0.73bn at avg R17.89/$)

+1.8%

2.0% normalised (FY2024: 4.3%)

Single-site, mid-scale

Novelis (FY to March 2025)

approx. USD 17bn (indicative)

Low single-digit positive (indicative)

approx. 10–11% (indicative)

Global leader in can and auto FRP

Constellium (FY2024)

approx. EUR 7.3bn (indicative)

About flat (indicative)

approx. 7–8% (indicative)

Packaging, aerospace plate, auto

Kaiser Aluminum (FY2024)

approx. USD 3.0bn (indicative)

Slightly negative (indicative)

—

North American plate and packaging

Company Snapshot

$724.9M

Revenue

1,722

Employees

1935

Founded

Pietermaritzburg, South Africa

Headquarters

SWOT Analysis

Strengths

  • Domestic market leadership. Hulamin holds about 60% of SA canbody stock and supplies up to about 70kt locally (Engineering News, March 2025; Financial Mail, November 2025). It is the only primary rolling mill in sub-Saharan Africa.
  • Wide-canbody programme completed. The approx. R500m three-phase programme finished on schedule in July 2025, and three of four SA can makers were commercialised by H1 2026 (SENS, 8 August 2025; H1 2026 interim).
  • Proven operational recovery. The core-stream run-rate rose from 424t/day (H2 2025) to 527t/day (June 2026); canbody and heat-treat plate production both exceeded H1 2025 levels (H1 2026 interim).
  • Secure, integrated metal supply. Hulamin owns the Bayside slab casting operation adjacent to the 720kt Hillside smelter (100% of Isizinda since 2024).
  • Favourable trade-remedy status in the US. Hulamin's individual AD margin on common-alloy sheet is zero (Federal Register, 6 March 2026), and North American revenue grew 76% in H1 2026 despite 50% tariffs.
  • Refinanced liquidity runway. Committed facilities of R2.25bn run to 31 October 2028, with R548m undrawn at 30 June 2026 and covenants met (H1 2026 interim note 10).
  • ESG credentials. SBTi-validated 30% Scope 1+2 reduction target by 2030, ASI membership, and a wheeling PPA from 2028 (sustainability reports; FY2025 AFS). H1 2026 LTIFR halved to 0.07.

Weaknesses

  • Earnings collapse in FY2025. Continuing operating profit fell 79% to R119m and the group lost R148m; normalised EBIT interest cover was about 0.4x (FY2025 AFS; derived).
  • High leverage relative to earnings. Net debt of about R1.70bn is about 6.5x FY2025 normalised EBITDA; net debt/equity rose from 24.5% (FY2023) to 46.4% (FY2025).
  • Persistent negative free cash flow. Company-defined FCF was −R512m (FY2024), −R303m (FY2025) and −R59m (H1 2026).
  • Thin structural margins. Normalised EBITDA margin peaked at 4.5% (FY2023) and was 2.0% for continuing operations in FY2025. Gross margin compressed from 12.0% to 9.0% (FY2024 to FY2025).
  • Single-site operational fragility. The June 2024 CCL2 fire cost about 8kt of high-margin sales, and the 2025 post-restart failures caused customer returns and forced inventory sales.
  • Heavy working-capital intensity. Net working capital is about 48% of revenue, and inventory rose R396m in H1 2026 alone on LME moves.
  • Governance instability. The chair was removed in July 2026 and resigned in October 2026. Five board departures occurred in about 18 months, only 4 of 8 directors are independent, and more than 25% voted against remuneration at the 2026 AGM.

Opportunities

  • Local can growth. SA can-maker capacity is rising by about 23kt (about 107kt to about 130kt), and Hulamin can redirect can-end capacity towards canbody (Financial Mail, November 2025).
  • Full-year benefit of the ramp-up. Reaching 550t/day by Q4 2026 implies about 200kt annualised, roughly 18% above FY2025 volume (derived from about 169kt).
  • Can-end price recovery. Legacy back-orders at prior-year prices were fulfilled in H1 2026, and management expects higher global can-end pricing to flow through in H2 2026.
  • Deleveraging from disposals and working capital. R223m of identified H2 2026 mitigating cash flows, plus about R100m of additional cost savings.
  • Lower carbon cost and CBAM advantage. Wheeling PPA from 2028 and a higher scrap rate (above 27% target from 22%).
  • Stronger trade protection. Possible new SA anti-dumping or safeguard duties on Chinese material; Hulamin is actively engaging stakeholders (FY2025 AFS).

Threats

  • Rand strength. The 11% ZAR appreciation in H1 2026 was the primary cause of the 62% fall in normalised HEPS.
  • Upstream metal and energy risk. Hillside's discounted Eskom contract expires in 2031, and its post-2031 deal is still being negotiated. South32's Mozal smelter closed in 2026 after power talks failed, a precedent for this risk.
  • US tariff regime. 50% Section 232 tariffs on aluminium could erode plate and sheet margins if extended or restructured (FY2025 AFS indicators of uncertainty).
  • Import penetration. Low-priced imported finished can-ends depress local can-end prices and volumes (H1 2026 interim).
  • LME volatility. Spikes inflate working capital within a borrowing-base facility. The LME rose about $1,000/t from June 2025 to the 2026 peak, and net debt rose R111m year on year in H1 2026.
  • BEE rating deterioration. The BEE scheme unwind cut direct BEE ownership from about 18% to about 5.4%, which is expected to adversely affect Hulamin's BEE rating and possibly local procurement positioning (SENS, 27 March 2026; H1 2026 note 2(e)).

Unlock Company Financials

Unlock this company profile to view its financial data.

View Subscription Plans

Key Developments

DateEventSignificance
1 April 2025Paul Baloyi (former DBSA CEO) joins board as independent NED, chair-designatePlanned chair succession
22 May 20252025 AGM: all resolutions passed; 52% of listed shares voted; Nirghin, Tostmann, Yanta and Baloyi electedRoutine governance
6 June 2025Hulamin Containers ceases operations (R15m restructuring cost)First non-core exit
30 June 2025Extrusions classified as held for sale / discontinuedAccounting re-presentation; R69m impairment
July 202525-day integrated plant shutdown; cold mill widened (Phase 3)Completion of the R500m programme
8 August 2025SENS: strategic capital investment update — Phase 3 complete; commercial readiness targeted end-Q1 2026Milestone
18 August 2025Cautionary: negotiations to dispose of Hulamin ExtrusionsStart of the exit process
25 August 2025H1 2025 results: continuing HEPS 14c (−28%); normalised EBITDA R282m; stronger rand and can-end pricing pressureEarnings weakening
31 August / 1 September 2025Leeuw retires; Baloyi becomes chairmanBoard transition
29 September 2025Renewal of cautionaryProcess ongoing
October 2025Banking facilities refinanced: R1.6bn working-capital facility extended 3 years; new R200m term loanLiquidity runway to 2028
6 November 2025Financial Mail interview: 200kt by 2027 target; about 60% can stream; SA can-maker capacity rising from about 107kt to about 130ktStrategic framing
10 November 2025Cautionary renewal: buyer progressing pre-signature conditionsProcess ongoing
17 December 2025Cautionary renewalProcess ongoing
22 December 2025Trading statement: FY2025 earnings at least 20% lower; mill stabilisation and quality problems; remediation roadmap with resolution expected by early 2026Profit warning
31 January 2026Binding offer accepted for Containers property and plant (R16m)Asset recycling
2 February 2026Cautionary renewalProcess ongoing
27 February 2026BEE scheme vesting date reached; scheme not extendedOwnership and BEE rating impact
6 March 2026US Department of Commerce final results of AD administrative review (period April 2023 – March 2024): zero dumping margin for Hulamin OperationsPreserves US market access (exclusive of Section 232 tariffs)
16 March 2026Cautionary renewalProcess ongoing
20 March 2026Further trading statement: headline loss per share (26)–(32)c; loss per share (43)–(53)cSecond profit warning
23 March 2026FY2025 audited results and Integrated Report: continuing revenue R13.05bn (+2%); operating profit R119m (−79%); HEPS (29)c; no dividend; unmodified EY opinionAnnual results
27 March 2026Vesting and repurchase of BEE shares; direct BEE holding about 18% to about 5.4%; Ngwenya and Zondi resignGovernance and BEE
31 March / 2 April 2026CA Boles resigns as INEDBoard attrition
24 April 2026Extrusions disposal to Norsaf ERS announced; cautionary withdrawnDivestiture agreed
28 April 2026South32 and Eskom announce a joint working group on post-2031 Hillside powerUpstream supply-security signal
30 April 2026Financial Mail: Hulamin "ready to roll"; expansion doubles cold-rolling capacity; utilisation above 85% targetMarket narrative
7 May 2026AGM notice amended; Monnakgotla appointed to audit committee; AGM venue changed; a special resolution withdrawnGovernance
21–22 May 202686th AGM: all resolutions passed; more than 25% of votes against non-binding remuneration resolutions, triggering shareholder engagementInvestor dissent on pay
1 June 2026Extrusions terms amended; Competition Authorities confirm not notifiable; effective date fixed at 1 JulyDeal certainty
1 July 2026Extrusions disposal effective; R10m cash receivedPure-play Rolled Products
6 July 2026Board removes Baloyi as chair; Yanta interim chair; committees reconstitutedBoard instability
3 August 2026H1 2026 results: HEPS 79c (from 14c) on MPL; normalised EBITDA R177m (−37%); 527t/day run-rate in June; no dividendOperational turnaround
2 October 2026Baloyi resigns from the boardCompletes chair exit

Financial Performance

Explore key financial metrics, segmented revenue, balance sheet health, and performance trends.

Revenue

9 charts
Income Statement: Revenue & Gross Profit (FY2024–FY2025): Revenue rose from ZAR 12,818.6 Mn in FY2024 to ZAR 13,048.8 Mn in FY2025.
Hulamin Limited — Income Statement: Revenue & Gross Profit (FY2024–FY2025)
Series (ZAR Mn)FY2024FY2025
Revenue12,818.613,048.8
Cost of goods sold-11,188.3-11,754.7
Cost of services provided-86.6-113.7
Gross profit1,543.81,180.4

Unlock Company Financials

Unlock this company profile to view its financial data.

View Subscription Plans

Unlock Company Contacts

Connect with Key Decision-Makers

Access verified employee contacts and decision-maker information from this company to support your sales, lead generation, and business development efforts.