Company ProfilePremium

Master Bond Inc.

Company Profile Analysis

ESOMAR 23 Corporate BadgeISO Certifications Badge
Master Bond Inc. - Company showcase

Year Founded & Workforce

1975

24 Employees

Master Bond Inc. logo

Master Bond Inc. Employee Contacts

3 verified contactsNames, job titles, seniority and locations

View Employee Contacts

Master Bond Inc. Overview

FieldDetailSource / Note
Legal nameMaster Bond Inc. (also styled "Master Bond, Inc.")Company website; trade directories
Former namesNone identifiedNo rename found in any source
Name variants seen"Master Bond LLC" appears as a search alias on ZoomInfono LLC registration confirmed. Treat as a data-aggregator artifact until checked against the NJ registry
Founding year1975 per company; 1976 per several trade-directory profilesDiscrepancy noted. Company site tagline: "since 1975". Power & Motion, Microwave Journal and Autotouch profiles say "Established in 1976". Company source preferred
Incorporation jurisdictionBelieved New JerseyNot confirmed from NJ Division of Revenue records
Headquarters154 Hobart Street, Hackensack, NJ 07601, USACompany website; multiple directories
Telephone / Fax+1 201-343-8983 / +1 201-343-2132Company website
Stock exchange / tickerNone. Privately heldRigzone directory: Ownership "Private"
ISIN / CUSIPNot applicableNot listed
Fiscal year end—Private company
Employees (latest)~24–26; band 11–50Growjo: 26, 0% growth last year. Autotouch: 24. ZoomInfo: 11–50. All third-party estimates, undated
Employee 3-year trendNot publicly disclosed; Growjo indicates flat (0%)Third-party only
Auditor—Private company
Market capitalizationNot applicable / not publicly disclosedUnlisted
Revenue (third-party estimates)USD 3.6M (Growjo); USD 5.7M (ZoomInfo)Unaudited model estimates, undated. Treat as indicative only
Industry codesSIC 2891 (adhesives & sealants); NAICS 325520 (Adhesive Manufacturing)ZoomInfo shows "SIC 28,289 / NAICS 32,325" in truncated form; mapped to the nearest standard codes. Verify
Websitehttps://www.masterbond.comAvailable in English, German, Spanish, French, Italian (Hebrew-path pages also exist)
Product breadth3,000+ grades of formulationsCompany website; multiple directories
Key named personnelDr. Walter Brenner (Technical Director, per website); Robert Michaels (VP Technical Sales); Kiran Patel (Owner and Vice President, per ZoomInfo); Rohit Ramnath (Senior Product Engineer)See Section 9

Master Bond Inc. is a small, privately held, single-site specialty chemicals formulator in Hackensack, New Jersey. It has developed and manufactured high-performance polymer systems since 1975. Its competitive identity rests on breadth and customization rather than scale. The company maintains a catalog of more than 3,000 grades across epoxies, silicones, UV/LED-curable and dual-cure systems, urethane- and polysulfide-modified epoxies, cyanoacrylates, film adhesives and silicate systems. It reformulates properties such as viscosity, cure schedule, Tg, thermal and electrical conductivity, optical clarity and chemical resistance to an application's specification. It also supplies replacements for competitors' discontinued products. Its products are qualified against demanding third-party standards, including NASA low outgassing (ASTM E595), USP Class VI, ISO 10993-5/-4/-10, UL 94V-0, UL 1203, MIL-STD-883J and FDA food-contact rules. These qualifications serve aerospace, electronics, medical device, optical/photonics and industrial OEMs. Selling directly from Hackensack and backing each sale with application-engineering support, Master Bond is a niche, high-mix, low-volume player. It competes against far larger multinationals by offering technical intimacy and speed of formulation.


Company's own description

Master Bond has no annual report. Its self-description comes from its website and supplier-directory entries. The company describes itself as a specialist formulator focused on epoxies, silicones, polyurethanes, polysulfides, UV cures and other specialty adhesive systems, and calls itself one of the leading adhesive formulation companies in the world (masterbond.com "About Master Bond"). It describes its product line as advanced adhesives, sealants, coatings, potting/encapsulation compounds and impregnation resins, each designed for specific application requirements (masterbond.com; OEM Off-Highway directory). Its stated differentiators are:

  • Customizable properties across 3,000+ formulations

  • Breadth of industry reach

  • One-on-one technical support from concept through production

  • Compliance with demanding industry standards

(Design World Leadership profile, 2025/2026)

The company also states that it is "conservatively managed" and that it manufactures and sells exclusively from its Hackensack location.

Independent characterization

Master Bond is best understood as a formulation-led, application-engineering business, not a commodity adhesives producer. Its economic model is that of a specialty chemical "job shop with a catalog". It buys base resins, curing agents, fillers (silver, nickel, graphite, quartz, silicon carbide, nanosilica, thermally conductive ceramics) and additives, then blends, tests, packages and ships small-to-moderate lot sizes to engineering-driven customers. Its value lies in:

  • (a) the accumulated formulation library

  • (b) third-party qualification data (NASA outgassing, USP Class VI, ISO 10993, UL) that customers would otherwise have to generate themselves

  • (c) the speed with which its chemists can modify an existing grade for a new specification

Business and revenue model

Revenue streamDescriptionEst. share of revenue
Standard catalog product salesSale of existing grades in standard packaging (jars, cans, kits)Not publicly disclosed (analyst view: dominant)
Custom formulationModification of existing grades or new compositions to customer specNot publicly disclosed; typically bundled into product price
Specialty packagingSyringes, cartridges, gun applicators, premixed-and-frozen packages, bi-paks—
Replacement formulationsEquivalents for competitors' discontinued products—
Technical servicesApplication engineering and selection supportProvided free as part of the sale (no evidence of separate billing)
Licensing / subscriptionNone identifiedNot applicable

Revenue is therefore almost entirely product revenue, with service embedded. No subscription or licensing income has been identified.

Value chain position

Master Bond sits in the mid-stream formulation layer:

  • Upstream are base-chemical and resin suppliers (epoxy resin, silicone polymer, photoinitiator and filler producers).

  • Downstream are OEMs and contract manufacturers in electronics, aerospace, medical devices and optics, which consume the adhesive within assembly processes.

  • The company sells directly to end users. It states that its products are available for purchase exclusively from Hackensack, which implies no reliance on third-party distributors.

Customer types and end-markets

End-marketRepresentative applications (company-stated)
Aerospace and defenseAerospace electronics, aircraft interiors (FAR 25.853, Airbus/Boeing smoke-toxicity testing), structural bonding, space-grade low-outgassing systems
Electronics and semiconductorsDie attach, glob top, underfill, lid sealing, heat sink attachment, surface mount, PCB assembly, conformal coating, RF/microwave and EMI/RFI shielding
Medical devicesDisposable and reusable devices, surgical instruments, orthopedics/prosthetics, dental, diagnostics, molecular diagnostics, respiratory, medical electronics, wearables
Optical / photonicsFiber optics, lasers, LED assembly, display assembly, electro-optic systems
Oil, gas and chemical processingPipelines, refineries, petrochemical maintenance, downhole and production equipment
Industrial / OEM / otherAutomotive (incl. electronics), batteries, motors and generators, appliances, food processing (FDA 175.105/175.300), telecom, renewable energy, MRO, R&D labs

Customers are typically design and process engineers at OEMs, contract manufacturers, government and academic labs, and MRO operators. Named customer lists are not disclosed. The company does publish case studies, including NASA's use of EP65HT-1 in thin-film organic photovoltaics (June 2025).

Strategy

Stated strategy

Master Bond has no annual report or investor day. Its strategy, as expressed in its public positioning, centers on four themes (paraphrased from masterbond.com and its Design World leadership profile):

  1. Custom formulation at scale of choice. Tailor any property to the customer's exact application from a 3,000+ grade library.

  2. Technical intimacy. One-on-one engineering support across design, prototyping and production.

  3. Qualification-led trust. Build and publicize third-party certifications (NASA, USP, ISO 10993, UL, MIL-STD, FDA, Airbus/Boeing, Telcordia).

  4. Direct, made-to-order supply. Manufacture to order in Hackensack for performance and extended shelf life.

Observable initiatives (last 24 months)

InitiativeEvidenceStrategic intent
Expansion of medical-grade portfolioEP21LSCL-2Med (Nov 2024), LED415DC90Med (Feb 2025), EP3HTSDA-2Med (May 2025), MasterSil 800Med (Nov 2025), UV26DCMed (Feb 2026), UV16Med-FD (Jul 2026); white paper on non-cytotoxic adhesives for wearables (Jun 2025)Penetrate higher-margin, regulation-gated medical device assembly, especially reusable devices that need sterilization resistance
Sterilization compatibility researchPeer-reviewed STERIS VHP study (Sep 2024); sterilization-resistant compounds newsletter (Jul 2025)Remove a key qualification barrier for hospital-reprocessed devices
Thermal management pushEP53TC (Jan 2025), EP54TC (>6 W/(m·K), Jan 2026), EP6STC-80 (Mar 2026), EP55TCFL (Aug 2026)Capture demand from power electronics, EV/battery, and densifying electronics with rising heat loads
Space / low-outgassing gradesEP3HT-LO (Oct 2024), EP53TC, EP64 (May 2026), MasterSil 981-LO (Jun 2026), EP55TCFL; NASA EP65HT-1 case study (Jun 2025)Serve satellite and space supply chains
Process-friendly one-part systems"Not premixed and frozen" one-part epoxies (EP3HTSDA-2Med, Supreme 10HTLV, EP6STC-80) with unlimited room-temperature working lifeReduce customers' cold-chain logistics and support automated dispensing
LED / dual-cure fixturingLED415DC90Med, LED422DC90 (side-bonding), UV26DCMedEnable high-throughput assembly and curing in shadowed or opaque areas
Hazardous-location certificationUL 1203 content for EP41S-6 (Jul 2025)Address explosion-proof electrical equipment markets
Content marketingWeekly eNewsletters, white papers (hermetic wire feedthroughs, Aug 2025), videos, lab reportsLow-cost demand generation for a small direct-sales organization
Sustainability positioning"Commitment to Sustainability" page; EP70CN made with a natural renewable ingredient; RoHS and halogen-free gradesMeet customer ESG and materials-compliance requirements

Medium-term targets and guidance

None. Management does not publish financial targets, cost programs or guidance.

Products & Services

With 3,000+ grades, a literal grade-by-grade catalog is impractical. The register below lists every product line on the company's taxonomy and every flagship or named grade identifiable from public releases, organized by product family. Pricing is not publicly disclosed for any grade; Master Bond quotes by request.

Epoxy systems

ProductDescription and key specs (as published)Target customerLaunch / latest year
EP62-1HTNDTwo-part, non-drip paste epoxy for bonding and sealing; high-temperature capability; acid resistance; no flow on vertical surfacesChemical processing, industrial OEM2026 (1 Oct)
EP55TCFLThermally conductive, electrically insulating, low-modulus epoxy; NASA low outgassing; fine filler for thin bond linesAerospace electronics, thermal management2026 (27 Aug)
EP64Two-part, vacuum-compatible epoxy; Tg 210–215°C; NASA low outgassing (ASTM E595); chemical resistantAerospace, vacuum and semiconductor equipment2026 (1 May)
EP6STC-80One-part, non-frozen, silver-filled; high thermal and electrical conductivity; unlimited room-temperature working life; full cure at 80°CElectronics assembly, heat-sensitive components2026 (30 Mar)
EP54TCTwo-part heat sink bonding epoxy; >6 W/(m·K), the highest in Master Bond's electrically insulating portfolioPower electronics, thermal management2026 (14 Jan)
Supreme 10HTLVOne-part, non-frozen, heat-cured toughened structural epoxy; service from 4 K to 400°F; volume resistivity >10^12 ohm-cm; gray standardAerospace, cryogenics, structural OEM2025 (18/19 Dec)
EP3HTSDA-2MedTrue one-part (not premixed/frozen) silver-filled conductive epoxy; long working life; passes ISO 10993-5Medical electronics, automated assembly2025 (19 May)
EP29LPSPND-3Two-part non-drip paste; electrically non-conductive; thermally insulative (~0.2 W/(m·K)); cryogenic serviceabilityCryogenic systems, aerospace2025 (24 Mar)
EP53TCTwo-part, flowable (45,000–65,000 cps mixed), thermally conductive; filler 5–30 µm; NASA low outgassingElectronics, aerospace2025 (20 Jan)
Supreme 121AONDTwo-part, heat-curing, toughened, thixotropic paste; Tg 200–210°C; chemical resistantAerospace, electronics2024 (19 Dec)
EP21LSCL-2MedTwo-part, low-viscosity, optically clear, non-cytotoxic; engineered to resist yellowingMedical devices, optics2024 (12 Nov)
EP3HT-LOOne-part, non-premixed/frozen, heat-cured; unlimited working life; NASA low outgassingAerospace, microelectronics, optics2024 (10 Oct)
EP65HT-1High-performance epoxy; subject of 2025 case study on NASA thin-film organic photovoltaicsSpace / energy researchCase study Jun 2025 (launch year not disclosed)
EP41S-6Two-part epoxy meeting UL 1203 for explosion-proof and dust-ignition-proof equipment in hazardous locationsHazardous-location electrical equipmentUL content 2025 (launch earlier)
Supreme 17HTND-2One-part toughened bonding/sealing epoxy; Tg ~410°FElectronics, aerospace—
Supreme 3DM-85One-part toughened epoxy for bonding, sealing, dam-and-fillElectronics packaging—
Supreme 42HT-2ND BlackTwo-part non-drip black epoxy for bonding, sealing, coatingOptics (light blocking), electronics—
EP17HTND-CCMOne-part, not premixed/frozen glob-top alternative to two-part systemsChip-on-board electronics—
EP3UF-1One-part underfill/bonding epoxy; 5,000–15,000 cps; compressive strength 18,000–20,000 psiSemiconductor packaging—
EP21TPHTTwo-part epoxy-polysulfide; toughened; serviceable to 350°FIndustrial, chemical—
EP30DPBFMedTwo-part flexibilized epoxy-urethane hybrid; USP Class VI; RoHS3Disposable and reusable medical devices—
EP29LPTCHTTwo-part, low-viscosity, thermally conductive underfill/encapsulantElectronics—
EP62-1AOTwo-part epoxy with 12–14 h working life (100 g mass)Large-assembly bonding—
Supreme 121AONASA low outgassing epoxy for bonding, sealing, pottingAerospace—
EP110F8-3Toughened, flexible two-part potting epoxy; elongation 120–150%Electronics potting—
EP70CNTwo-part, thermally stable epoxy formulated with a natural, renewable ingredientSustainability-oriented OEMs—
EP126Thermally stable epoxy to 600°F; chemical resistantElectronics, aerospace, opticsc. 2016
EP46HT-1-100°F to +600°F service; Tg >240°CAerospace, high-temperatureLegacy
EP17One-part toughened heat-cure; -300°F to 600°F serviceAerospace, industrialLegacy
EP30 / EP30HV / EP30M3LVLow-viscosity two-part family; EP30HV optically clear and FDA compliant; EP30M3LV low-exotherm pottingOptics, electronics, medicalLegacy / 2013
EP21LVSP6Low-viscosity, low-exotherm casting epoxy; 3–5 h working lifeLarge castings2,013
Supreme 45HTQ / Supreme 45HTQ-4Quartz- or silicon-carbide-filled, abrasion- and chemical-resistant; to +450°FPetrochemical, wear surfaces2013 onward
EP76M / EP77M-FNickel- or silver-filled electrically conductive epoxiesElectronics, EMI groundingLegacy
EP62-1MED / EP45HT MEDSterilization-resistant medical epoxiesMedical devicesLegacy
EP21FRNS-2Non-halogen, UL 94V-0 flame-retardant potting epoxyElectrical equipmentLegacy
Supreme 11AOHTLP / Supreme 11AOHTMedTwo-part, thermally conductive, electrically insulatingElectronics; medical—
EP114, EP42HT-2FG, EP21TP-2NV, EP41S-5ND, EP3HTS-TC, EP88FL, Supreme 17HT, EP30-4Med, EP121CL-LO, EP30HT-LO, EP21TDCS-LO, EP21ARHTND-2, EP21ND-LPFurther named grades in trade-directory press listingsVariousVarious

Silicone systems

ProductDescription and key specsTarget customerYear
MasterSil 981-LOTwo-part, addition-cured, optically clear, highly flexible; NASA low outgassingAerospace, satellite, optics2026 (5 Jun)
MasterSil 800MedOne-part moisture-curing silicone, 300°C rated; non-corrosive; ISO 10993-5Medical device manufacturing2025 (19 Nov)
MasterSil 980Two-part fluorosilicone; resists gasoline, diesel, motor oil, ethanol, solventsAutomotive, fuel systems—
MasterSil 153Med / MasterSil 153AOTwo-part, 1:1 paste; USP Class VI and ISO 10993-5 (Med); 5–7 h working lifeMedical devices—
MasterSil 156Two-part, thermally conductive; UL 94V-0Electronics2,013
MasterSil 151S, MasterSil 323S-LO, MasterSil 707FR-NVFurther silicone grades in trade listings (323S-LO low outgassing; 707FR-NV flame retardant)Various—

UV curable, LED curable and dual-cure systems

ProductDescription and key specsTarget customerYear
UV16Med-FDOne-part, low-viscosity, epoxy-based UV system with fluorescent dye for black-light inspection; ISO 10993-5Medical devices, optics2026 (10 Jul)
UV26DCMedOne-part dual-cure; high Tg; withstands steam autoclave, EtO, glutaraldehyde; hydrogen-peroxide compatibleReusable medical devices2026 (18 Feb)
LED422DC90One-part, nanosilica-filled dual-cure; "side-bonding" cures 3–4 mm deep under 405 nm LED; heat cure followsOpaque-substrate assembly2025 (22 Sep)
UV15-7HPOne-part, low-viscosity, toughened, optically clear UV adhesive; 320–365 nm; 20–40 mW/cm²Optics, display2025 (22 Apr)
LED415DC90MedOne-part dual-cure; 405 nm LED, no oxygen inhibition, then 30–45 min at 90–95°CMedical electronics2025 (25 Feb)
UV26One-part UV, Tg 160–170°C; NASA low outgassingOptics, aerospace—
UV22Nanosilica-reinforced UV-curable epoxyOptics, electronicsLegacy
UV19Low-viscosity flexible UV system for laminating and castingOpticsLegacy
UV10TKMed / UV10TKLO-2Higher-viscosity medical UV (USP VI, ISO 10993-5) / low-outgassing variantMedical; aerospace optics2013 / not disclosed
UV15DC80-1Med, UV15RCLDual-cure medical; further UV gradeMedical; optics—

Other systems

Product lineDescriptionExample grades
CyanoacrylatesInstant adhesivesGrades not individually identified in this review
Elastomeric systemsFlexible, elastomer-based sealantsNot individually identified
Film adhesives and preformsEpoxy films and die-cut preformsFLM36 (film adhesive)
Silicate-based systemsAqueous sodium silicate coatingsMB600S (EMI/RFI shielding coating)
Urethane-modified epoxiesFlexibilized hybridsEP30DPBFMed
Polysulfide-modified epoxiesToughened, chemically resistantEP21TPHT

Services and packaging

OfferingDescription
Custom formulationRedesign of existing grades or new compositions to target viscosity, cure, thermal, electrical, optical, chemical or mechanical properties
Discontinued-product replacementEquivalents for competitors' discontinued adhesives
Application engineeringOne-on-one support from design through prototyping and production
PackagingStandard (cans, jars, kits), specialty, syringes and cartridges, gun applicators, premixed-and-frozen formats
Technical contentCase studies, white papers, lab reports, eBooks, tech tips, video library, weekly eNewsletter

Financial Narrative

Disclosure position

Master Bond Inc. is privately held. It files no 10-K, 10-Q or proxy, and publishes no audited accounts. No primary-source financial data exists in the public domain. All tables below are presented in the required format with blank year cells (= not publicly disclosed). Only third-party revenue estimates are available, shown separately in 6.6 with their limitations.

Income statement

Revenue CAGR (FY2021–FY2025): not publicly disclosed.

Commentary

No trend, inflection or driver analysis can be grounded in disclosed financials. Three qualitative indicators are observable:

  1. Steady product cadence. Eight new-product releases in CY2025 and eight in CY2026 through early October suggest the development pipeline and, by implication, the R&D budget are being sustained.

  2. Flat headcount. Third-party data shows ~24–26 staff with 0% growth, consistent with a stable, owner-managed business rather than one in expansion or distress.

  3. Self-description as "conservatively managed". Combined with no evidence of debt issuance, acquisitions or external capital raising, this points to a self-funded, low-leverage balance sheet. That inference cannot be verified.

Unlock Company Financials

Unlock this company profile to view its financial data.

View Subscription Plans

Financial Detail

Product Families

Product family (website taxonomy)Contents

Epoxy systems

One-component (incl. non-premixed/non-frozen), two-component, B-stage epoxies

Silicone systems

One-component, two-component, fluorosilicones

UV curable

UV adhesives, dual-cure (UV + heat), scratch-resistant coatings, UV-cure gasketing, UV potting

LED curing

405 nm LED-curable and LED dual-cure systems

Modified epoxies

Urethane-modified and polysulfide-modified epoxies

Other systems

Cyanoacrylates, elastomeric systems, film adhesives and preforms, silicate-based systems

Product Families (Annual)

Product family (count of new-product press releases)CY2025CY2026 YTD

Epoxy systems (incl. silver-filled and thermally conductive)

55

Silicone systems

11

UV and LED curable incl. dual cure

32

Total new-product releases

88

Segment Revenue

Product family (count of new-product press releases, corrected)CY2025CY2026

Epoxy systems

45

Silicone systems

11

UV and LED curable incl. dual cure

32

Total

88

Source Details

SourceRevenue estimateEmployeesImplied revenue per employeeNotes

Growjo

USD 3.6M per year

26

USD 140,000

Model estimate; undated; employee growth 0%

ZoomInfo

USD 5.7M

11–50 band

Not derivable

Model estimate; undated

Autotouch

Not given for company

24

Not derivable

Prospecting database

Geographic Revenue

IndicatorObservationImplication

Website languages

English, German, Spanish, French, Italian (plus Hebrew-path pages)

Meaningful European, Latin American and possibly Israeli demand. The company says it can help engineers in their native languages

Sales channel

Products sold exclusively from Hackensack, NJ

International customers buy direct and receive export shipments; no foreign subsidiaries identified

Trade media presence

Primarily US engineering publications (Machine Design, Electronic Design, Design World, Medical Design & Outsourcing, Laser Focus World, Vision Systems Design, Military & Aerospace Electronics, Microwaves & RF)

Core market is likely North America

Capital Markets

ItemStatus

Listing

None. Privately held

P/E, EV/EBITDA, EV/Sales, P/B

Not applicable / not publicly disclosed

Analyst consensus

No analyst coverage

Credit ratings (Moody's / S&P / Fitch)

Not rated

External funding

None identified (Growjo: "Total Funding N/A")

Analyst Conclusions

Management guidance

None published.

Consensus expectations

None (no coverage). The relevant external benchmark is end-market growth: electronic adhesives at ~5–7% per year (GMI, IMARC, Roots Analysis), with the epoxy sub-segment at ~5.7% (GMI).

Bull case

  1. Pipeline aligned to the fastest-growing niches. Of the 16 new products launched in CY2025–CY2026, most target thermal management, space-grade low outgassing or medical sterilization resistance. These are three of the most qualification-intensive, price-tolerant pockets of the adhesives market.

  2. Qualification moat. The breadth of certified grades (NASA, USP VI, ISO 10993, UL 1203, Telcordia) raises customers' switching costs. Once an adhesive is designed into an aerospace or medical bill of materials, re-qualification is costly.

  3. Strategic value of the library. In a consolidating sector, a 50-year-old, 3,000-grade formulation library with an engineering customer base is an attractive bolt-on for a strategic buyer or PE platform, giving owners an option on a premium exit.

Bear case

  1. Scale ceiling. With ~25 staff, a single site and direct-only sales, growth is capped by engineering and production bandwidth. Flat headcount (Growjo: 0%) suggests the company is not expanding.

  2. Competitive pressure. Henkel, DELO, Dymax, Panacol and EPO-TEK/Meridian field competing NASA-grade, medical and LED dual-cure products with far greater sales coverage, especially in Asia, which accounts for about half of electronic adhesives demand.

  3. Concentration risks. Single-site operations, key-person dependence (founder-era technical leadership still featured on the website), and exposure to input-cost inflation (ASI reporting on geopolitically driven price pressure) could hit a firm with limited purchasing power and financial buffers.

Catalysts and monitorables (next 12 months)

MonitorableWhy it matters
Continued release cadence (benchmark: ~8 per year)Proxy for R&D health and strategic focus
Further medical sterilization validation or co-published researchStrengthens medtech positioning
Any leadership or ownership announcementSuccession is the largest undisclosed risk
Any M&A approach or sale processSector consolidation makes this plausible
Headcount changes on LinkedIn and data aggregatorsOnly available growth signal
New certifications (e.g., additional UL, aerospace prime approvals)Market access
Silver and specialty resin pricingInput-cost exposure for conductive and specialty grades
Regulatory developments (PFAS, REACH, TSCA)Possible reformulation burden

Concluding analyst verdict

Master Bond Inc. is not the "public company" the input list assumed. It is a closely held, single-site specialty formulator in Hackensack, New Jersey, operating for over five decades with an estimated two dozen employees and, per third-party models, single-digit millions of dollars in revenue. Investors and counterparties should treat every financial metric as undisclosed. The two available revenue estimates (USD 3.6M and USD 5.7M) are unaudited, conflicting and undated.

What can be verified is the quality and direction of the franchise. Master Bond has assembled a formulation library of more than 3,000 grades. It holds an unusually dense set of third-party qualifications for a firm its size: NASA low outgassing, USP Class VI, ISO 10993 biocompatibility, UL 94V-0 and UL 1203, MIL-STD, FAR 25.853 and Telcordia damp-heat. Its 2025–2026 launch program of sixteen products shows clear strategic intent toward thermal management (EP54TC exceeding 6 W/(m·K) while electrically insulating), space-grade low outgassing (EP64, MasterSil 981-LO, EP55TCFL), and reusable medical devices (UV26DCMed, the STERIS-validated epoxy range). These are the segments of a ~USD 5–6bn electronic adhesives market where qualification data and responsiveness matter more than scale.

The constraints are equally clear. A single facility, no distribution channel, flat headcount and apparent reliance on long-tenured technical leadership create concentration and succession risks that cannot be assessed from public data. Global players and well-funded specialists such as DELO, Dymax and EPO-TEK compete directly in each of Master Bond's chosen niches.

Verdict: Master Bond is a durable, technically credible niche supplier, best viewed as a qualified source for low-volume, high-reliability applications and as a potential consolidation target rather than an investable growth platform. Before relying on it as a supplier or engaging in transaction diligence, counterparties should obtain financial statements, ownership and succession information, site-level EHS records and customer-concentration data directly from the company.

Unlock Company Financials

Unlock this company profile to view its financial data.

View Subscription Plans

Executive Leadership

Executive Leadership Team

NameTitlePrior roles / educationSource

Dr. Walter Brenner

Technical Director (as named on company "About" page)

Ph.D. Polymer Chemistry, Brooklyn Polytechnic Institute; Professor of Chemical Engineering; consultant to US government agencies; holds numerous patents; credited with first developing electron-beam radiation curing

Company website

Robert Michaels

VP Technical Sales; also listed as executive contact and applications engineer

—

Microwave Journal directory; Rigzone; Growjo

Kiran Patel

Owner and Vice President

—

ZoomInfo (third-party; not confirmed by company)

Rohit Ramnath

Senior Product Engineer

—

Company press release (EP110F8-3)

Unnamed

President / Director Technical

—

Growjo staff listing (title only)

Unnamed

Chief Financial Officer

—

ZoomInfo org-chart placeholder (name gated)

"Dr. B"

On-camera presenter of the 40th-anniversary history series

Likely refers to Dr. Brenner (inference)

New Equipment Digest

“—” = not publicly disclosed.

Governance Overview

ItemStatus

Governance model (analyst view)

Closely held, owner-managed corporation; "conservatively managed" by its own description

Major Shareholders

Holder typeDetail

Institutional holders (top 10)

None. Not publicly traded

Insider / owner ownership

Closely held; ZoomInfo identifies Kiran Patel as an owner. Exact stakes not publicly disclosed

Private equity / venture backing

None identified ("Total Funding: N/A" in Growjo)

Competitive Landscape

Key Competitors

CompetitorOwnershipOverlap with Master BondRelative positioning

Henkel (Loctite)

Listed (Frankfurt)

Broad: epoxies, silicones, UV, cyanoacrylates, electronics and medical

Global scale leader; far larger distribution and brand reach; less custom-formulation intimacy for small accounts

3M

Listed (NYSE)

Structural adhesives, electronics materials

Scale and brand; broad industrial portfolio

H.B. Fuller

Listed (NYSE)

Engineering adhesives incl. electronics and medical

Acquisitive consolidator in engineering and medical adhesives

Dymax

Private (US)

UV/LED light-curable and dual-cure adhesives; medical

Strong in light-cure equipment plus chemistry; overlaps with Master Bond's UV/LED line

Epoxy Technology (EPO-TEK) / Meridian Adhesives Group

Private, PE-backed

Electronic, optical, medical and space epoxies, many NASA low outgassing

Closest like-for-like competitor in high-reliability specialty epoxies

DELO Industrial Adhesives

Private (Germany)

Electronics, optics, automotive; UV/LED and dual cure

Strong in high-volume electronics and automotive camera/sensor modules

Panacol-Elosol (Hönle Group)

Subsidiary of listed Dr. Hönle AG

UV/LED-curable, medical-grade adhesives

Light-curing specialist with REACH-compliant medical UV adhesives

Permabond

Private

Engineering adhesives (anaerobic, cyanoacrylate, epoxy, UV)

General engineering adhesives; distributor-led model

Cotronics

Private (US)

High-temperature epoxies and ceramics

Niche high-temperature overlap

Aremco

Private (US)

High-temperature adhesives, ceramics, coatings

Niche high-temperature and electronic overlap

Creative Materials

Private (US)

Electrically conductive adhesives and inks

Overlap with silver- and nickel-filled grades

Momentive / Dow (silicones)

Private / listed

Silicone adhesives, encapsulants

Silicone chemistry scale players

Peer Comparison FY2024

MetricMaster Bond Inc.Henkel (Adhesive Technologies)H.B. Fuller3M (total company)

Revenue

Not publicly disclosed (third-party estimates USD 3.6–5.7M)

~EUR 10.8bn (FY2024 segment sales, Henkel Annual Report 2024; verify)

~USD 3.6bn (FY2024 net revenue, 10-K; verify)

~USD 24.6bn (FY2024 sales, 10-K; verify)

Revenue growth

—

Low single digit organic (FY2024; verify)

Low single digit decline/flat (FY2024; verify)

Not comparable (portfolio changes)

Margins

—

High-teens adjusted EBIT margin (FY2024; verify)

Mid-teens adjusted EBITDA margin (FY2024; verify)

Not segment-comparable

R&D intensity

—

Not segment-disclosed

~1–2% of revenue (verify)

~4–5% of revenue (verify)

Employees

~24–26 (third-party)

~47,000 group (verify)

~7,000 (verify)

~60,000+ (verify)

Business model

Single-site, direct, custom-formulation

Global, distributor + direct, standard + engineered

Global, acquisitive

Diversified industrial

“—” = not publicly disclosed.

Recent Developments

Master Bond's public newsflow consists almost entirely of product launches, certifications and technical content.

Not observed in the period: * contract wins, guidance revisions, leadership changes, litigation, regulatory actions, restructurings, layoffs or hiring announcements.

Company Snapshot

24

Employees

1975

Founded

NJ, US

Headquarters

SWOT Analysis

Strengths

  • Very broad formulation library: 3,000+ grades (company website; multiple directories)
  • Deep third-party qualification portfolio: NASA low outgassing, USP Class VI, ISO 10993-4/-5/-10, UL 94V-0/V-1, UL 746A, UL 1203, MIL-STD-810G/-883J, FAR 25.853(a), Airbus/Boeing smoke-toxicity, FDA 175.105/175.300, Telcordia GR-1221, RoHS, IEC 61249-2-21 halogen-free (certifications pages)
  • Consistent innovation cadence: 8 new-product releases in CY2025; 8 in CY2026 through 1 Oct (news-release archive)
  • Credible scientific validation: Peer-reviewed STERIS VHP compatibility study (Sep 2024); NASA EP65HT-1 case study (Jun 2025)
  • Longevity and stability: Operating since 1975 (50+ years) at the same Hackensack address; self-described as conservatively managed
  • Performance-leading grades in niches: EP54TC >6 W/(m·K) while electrically insulating; Supreme 10HTLV serviceable from 4 K to 400°F; EP64 Tg 210–215°C with NASA low outgassing
  • Multilingual technical engagement: Website in five languages; company says it can help engineers in their native languages

Weaknesses

  • Very small scale: ~24–26 employees; third-party revenue estimates USD 3.6–5.7M (Growjo, ZoomInfo, Autotouch)
  • Single-site operations: All manufacturing and sales from 154 Hobart St., Hackensack (company website)
  • No distribution network: Products available exclusively from Hackensack (company website)
  • Flat headcount: Growjo: 0% employee growth last year
  • Opaque financials limit credit and partnering signals: No published accounts, auditor or ratings
  • Key-person dependence: Website still centers technical leadership on Dr. Walter Brenner, a founder-era figure; succession not disclosed

Opportunities

  • Electronic adhesives market growth: USD 5.0–5.8bn market growing ~5–7% per year (GMI, IMARC, Roots Analysis)
  • Epoxy sub-segment in electronics: ~USD 2.0bn in 2024, 5.7% CAGR (GMI), which is Master Bond's core chemistry
  • Thermal management demand: Product pipeline EP53TC → EP54TC → EP6STC-80 → EP55TCFL (2025–2026) aligns with rising heat-load needs
  • Reusable medical device sterilization: UV26DCMed (autoclave, EtO, glutaraldehyde, H2O2) and the STERIS study position it for reprocessed devices
  • Space and satellite supply chain: Five NASA low-outgassing launches in 2024–2026 (EP3HT-LO, EP53TC, EP64, MasterSil 981-LO, EP55TCFL)
  • Portfolio rationalization at large rivals: Company already markets replacements for competitors' discontinued products
  • Strategic sale / partnership: Active sector consolidation (H.B. Fuller medical adhesives activity; PRO-SET/Wessex). A catalog-rich niche formulator could command a strategic premium

Threats

  • Scale competitors in the same niches: Henkel, 3M, H.B. Fuller, DELO, Dymax, EPO-TEK/Meridian all offer NASA-grade, medical-grade and UV/LED systems
  • Input-cost inflation: Adhesives & Sealants Industry reports that geopolitical conflict and logistics problems are lifting adhesive and sealant pricing
  • Asian manufacturing concentration: Asia holds ~50% of electronic adhesives demand (Roots Analysis); IMARC also names APAC as largest
  • Regulatory chemical restrictions: Need for RoHS3, REACH, halogen-free compliance (company offers RoHS and IEC 61249-2-21 grades); future PFAS or substance restrictions could force reformulation
  • Single-site disruption: Fire, flood, environmental permit or supply interruption at Hackensack would halt all output
  • Talent scarcity: Formulation chemists and application engineers are a small, specialized talent pool. Losing a few individuals is material at ~25 staff

Unlock Company Financials

Unlock this company profile to view its financial data.

View Subscription Plans

Key Developments

DateEventSignificance
22 Apr 2025Launch of UV15-7HP toughened, optically clear UV adhesiveStrengthens optical/display bonding line
19 May 2025Launch of EP3HTSDA-2Med, one-part silver-filled conductive epoxy passing ISO 10993-5Medical electronics; supports automated dispensing
Jun 2025Case study: EP65HT-1 used by NASA in thin-film organic photovoltaicsSpace/energy credibility
Jun 2025White paper: non-cytotoxic adhesives for medical devices and wearablesWearables positioning
Jun 2025"Top 5 Adhesives for Optical Applications" contentOptics demand generation
Jul 2025UL 1203 certification content (EP41S-6)Hazardous-location equipment access
Jul 2025Sterilization-resistant adhesive compounds featureMedical reprocessing focus
Aug 2025White paper: adhesives and sealants for hermetic wire feedthroughsVacuum, aerospace, sensor sealing
22 Sep 2025Launch of LED422DC90 nanosilica-filled dual-cure with LED side-bondingHigh-throughput fixturing of opaque parts
19 Nov 2025Launch of MasterSil 800Med, one-part 300°C-rated medical siliconeHigh-temperature medical silicone
18–19 Dec 2025Launch of Supreme 10HTLV structural one-part epoxy (4 K to 400°F)Structural replacement for mechanical fasteners; cryogenics
Dec 2025Promotion of portfolio passing Telcordia GR-1221 85°C/85% RH damp-heat testingTelecom/optical reliability qualification
14 Jan 2026Launch of EP54TC (>6 W/(m·K)), the highest-conductivity electrically insulating gradeFlagship thermal management product
29 Jan 2026Corporate overview video syndicated via Microwaves & RFBrand marketing
18 Feb 2026Launch of UV26DCMed autoclave-resistant dual-cure medical adhesiveReusable medical devices
30 Mar 2026Launch of EP6STC-80 non-frozen silver-filled epoxy curing at 80°CHeat-sensitive electronics
1 May 2026Launch of EP64 vacuum-compatible, NASA low-outgassing epoxy (Tg 210–215°C)Space and vacuum equipment
5 Jun 2026Launch of MasterSil 981-LO optically clear, NASA low-outgassing siliconeSatellite optics
10 Jul 2026Launch of UV16Med-FD fluorescent-dyed UV system (ISO 10993-5)Inline quality inspection for medical assembly
27 Aug 2026Launch of EP55TCFL thermally conductive, low-modulus, NASA low-outgassing epoxyLow-stress thermal interface for aerospace electronics
1 Oct 2026Launch of EP62-1HTND acid-resistant, non-drip high-temperature epoxyChemical processing and vertical-surface applications

Sources

Sources

  1. 1Master Bond — About Master Bond (masterbond.com)
  2. 2Master Bond — News Releases (pages 1–4, 37, and archive pages) (masterbond.com)
  3. 3Master Bond — eNewsletters archive (2025) (masterbond.com)
  4. 4Master Bond — About / Who We Are (German mirror) (masterbond-de.masterbond.com)
  5. 5Design World Leadership — Master Bond profile (leadership.designworldonline.com)
  6. 6Rigzone — Company directory: Master Bond (rigzone.com)
  7. 7Microwave Journal — Buyer's guide listing (microwavejournal.com)
  8. 8Power & Motion — Master Bond profile (powermotiontech.com)
  9. 9Growjo — Master Bond revenue and employees (growjo.com)
  10. 10ZoomInfo — Master Bond company profile (zoominfo.com)
  11. 11Autotouch — Master Bond account info (autotouch.ai)
  12. 12Vision Systems Design — Supreme 10HTLV release (19 Dec 2025) (vision-systems.com)
  13. 13Electronic Design — Master Bond directory (electronicdesign.com)
  14. 14Machine Design — Master Bond directory and press releases (machinedesign.com)
  15. 15Microwaves & RF — "About Master Bond" video (29 Jan 2026) (mwrf.com)
  16. 16Medical Design & Outsourcing — EP126 (16 Nov 2016) (medicaldesignandoutsourcing.com)
  17. 17New Equipment Digest — Behind the Bonds: 40 Years (newequipment.com)
  18. 18Adhesives & Sealants Industry — Finished adhesives topic page (adhesivesmag.com)
  19. 19Global Market Insights — Electronic Adhesives Market (gminsights.com)
  20. 20IMARC Group — Electronic Adhesives Market (imarcgroup.com)
  21. 21Roots Analysis — Electronic Adhesives Market (rootsanalysis.com)
  22. 22Coherent Market Insights (via GII) — Electronic Adhesives Market (giikorea.co.kr)
  23. 23Knowledge Sourcing Intelligence (via GII) — Electronic Adhesives Forecast (giikorea.co.kr)
  24. 24Persistence Market Research (via DRI) — Electronics Adhesives Market (dri.co.jp)

Unlock Company Contacts

Connect with Key Decision-Makers

Access verified employee contacts and decision-maker information from this company to support your sales, lead generation, and business development efforts.