NAMICS Corporation Overview
NAMICS is a family-controlled maker of electrochemical materials based in Niigata. It is one of a few independent Japanese suppliers whose products sit inside almost every advanced semiconductor package now shipping. The company began as a regional paint maker and has spent eight decades moving into narrower and more technical niches. It dropped general paints entirely in 1980 and today makes two kinds of material that pull in opposite directions: insulating materials, led by its CHIPCOAT liquid encapsulants and capillary underfills, and conductive materials, led by its UNIMEC and HIMEC pastes. NAMICS says it holds about 40% of the global market for insulating materials such as underfill and more than 30% for conductive materials. Nikkei describes it as the world's largest supplier of liquid encapsulants. AI accelerators, GPUs and large flip-chip packages have pushed sales past JPY 100 billion. Intel and TSMC have both recognised it as a strategic supplier. The company has said it does not intend to list, and it reinvests in capacity, research and its home region of Niigata.
What the company does
NAMICS researches, develops, manufactures and sells electrochemical materials: liquid and paste formulations, films and glasses that insulate, encapsulate, bond or conduct electricity inside semiconductor packages and passive electronic components. The company's own description centres on being a "pioneer in conductive and insulating materials". Its slogan is "Small but Global": it wants to be distinctive in technology and international in reach rather than large. Its corporate vision is "Create value for the future — to become an 'Only One' and 'Number One' company". Its stated philosophy is to realise "the happiness of all people and the prosperity of nature through creation and innovation".
Products fall into two families:
Insulating materials: liquid encapsulants and capillary underfills (the CHIPCOAT line), adhesives, substrate materials, overcoat materials and thick-film materials.
Conductive materials: thermosetting conductive pastes (UNIMEC), fired conductive pastes (HIMEC), conductive adhesives and conductive films, plus newer forms such as stretchable pastes (KINOMEC) and an air-curing copper paste (XCH9207 series).
Business and revenue model
NAMICS sells formulated materials. Revenue comes almost entirely from product sales; the company discloses no service, subscription or licensing revenue. The model runs on qualification. A formulation is co-developed with a customer, often a foundry, IDM or OSAT running a specific package design. Once it is qualified into a high-volume package it can sell for the life of that package. Because a requalification costs the customer time and reliability data, switching costs are high.
President Toshinobu Odajima has described the product mix in a Nikkei interview (FY3/2026, published November 2025). The largest product lines sell about JPY 10 billion a year, while many others sell a few hundred million yen or even tens of millions of yen. That long tail of customised, low-volume products is the company's deliberate strategy. It concentrates on niches that are too small or too specialised for large chemical companies. The company works with about 700 customers worldwide. Roughly 40% of sales come from products developed in recent years.
Value-chain position
NAMICS sits in the back-end (assembly and packaging) part of the semiconductor materials chain. It is not active in front-end photoresists, process gases or CMP slurries. Its materials are applied when a chip is attached to a substrate:
-
Underfill flows under a flip-chip die, between it and the substrate. It bonds the two, spreads out the thermo-mechanical stress on the solder bumps, and protects the interconnects from moisture, vibration and contamination.
-
Die-attach and conductive adhesives fix dies and passive components and carry current or heat.
-
Liquid encapsulants and glob-top materials protect wire-bonded and chip-on-board assemblies.
-
Conductive pastes form electrodes and terminations in multilayer ceramic capacitors, chip resistors and similar parts.
Customer types and end-markets
| Customer type | Examples of use |
|---|---|
| Foundries and IDMs with in-house advanced packaging | Underfill for 2.5D/3D and large flip-chip packages (NAMICS was recognised by TSMC in 2024 and by Intel in 2022, 2024, 2025 and 2026) |
| OSATs (outsourced assembly and test) | Underfill, encapsulants and die-attach for flip-chip BGA, CSP and SiP |
| Passive component makers | Conductive and insulating pastes for capacitors, resistors and inductors (TDK gave NAMICS a supplier environmental award in September 2026) |
| Module and device makers | Adhesives for optics and silicon photonics, stretchable conductors, automotive electronics |
Foundries and IDMs with in-house advanced packaging: Examples of use: Underfill for 2.5D/3D and large flip-chip packages (NAMICS was recognised by TSMC in 2024 and by Intel in 2022, 2024, 2025 and 2026)
OSATs (outsourced assembly and test): Examples of use: Underfill, encapsulants and die-attach for flip-chip BGA, CSP and SiP
Passive component makers: Examples of use: Conductive and insulating pastes for capacitors, resistors and inductors (TDK gave NAMICS a supplier environmental award in September 2026)
Module and device makers: Examples of use: Adhesives for optics and silicon photonics, stretchable conductors, automotive electronics
End-markets are smartphones and mobile devices (historically the main volume driver), GPUs, CPUs and AI accelerators (the driver of the FY3/2025 step-up), data-centre networking and silicon photonics, automotive electronics (NAMICS has held IATF 16949 automotive quality certification since 2018), and solar cells.
Independent characterisation
NAMICS is best understood as a specialist in back-end packaging chemistry. Its competitive edge comes from formulation know-how, application engineering close to the customer, and reliability data built up over decades of qualifications, not from proprietary raw materials. Two growth phases stand out. Smartphone thinning drove demand for capillary underfill from the late 2000s. Since 2023, large-die AI packages that need high-performance underfill have driven a second phase. In FY3/2025 non-consolidated sales rose 52.4% in one year. Because NAMICS is private and holds about 40% of a concentrated niche, it can invest counter-cyclically. Its size and concentration, however, make it dependent on a small number of leading-edge packaging programmes.
Strategy
Stated strategic themes
"Small but Global": NAMICS aims for technical distinctiveness and international reach rather than scale.
"Only One & Number One": (since 2006). It aims for products that only NAMICS makes, or in which it is number one worldwide.
S·E·E·D·S development concept: Semiconductor, Environment, Energy, Device, System. These are the domains its R&D portfolio targets.
Customer intimacy as the engine: The president describes a culture in which conversations with customers create the next business, supported by overseas sales bases and engineers' attendance at academic conferences to pick up trends.
Sustained profitability over size: The president has said he has no target of becoming a company worth "several hundred billion yen" and wants to remain continuously profitable.
CSR Report 2025 president's message themes: continuous exploration and challenge; coexistence of people and nature; climate change and carbon neutrality; business continuity planning and geopolitical risk; hiring young talent; smart agriculture in Niigata; and support for childcare, youth, culture and sport in the region.
Initiatives announced or advanced in the last 24 months
| Initiative | Detail | Status |
|---|---|---|
| Niigata Matoba New Plant | Third domestic plant to raise output of liquid encapsulants and electronic adhesives; goal of 2.5x FY2022 capacity by FY2032; about JPY 25 billion including a JPY 5 billion subsidy | Construction July 2025 to August 2027 |
| Overseas investment acceleration | Management said in 2026 that overseas investment would accelerate | Under way; overseas office relocations announced July 2026 |
| US-JOINT consortium | Builds real test packages with US customers instead of relying on simulation, to shorten design cycles for underfill and LCM | Active; Union City R&D centre operating |
| Carbon neutrality | SBT 1.5°C approval (2024); 2050 carbon-neutrality policy (2025); heat-recovery heat pump; rooftop solar | Under way (Section 20) |
| Smart agriculture business | DOOR LAB (2024); DOOR base planned for 2028; industry–academia–government collaboration on production efficiency | Under way, behind the original 2026 opening target |
| Regional infrastructure support | Acquisition and lease of an aircraft to Niigata-based Toki Air | Ongoing |
| Brand building | Brand movies, the second released in July 2026, made with the animation studio MAPPA | Ongoing |
| Funding resilience | Commitment line with Daishi Hokuetsu Bank (April 2026) | In place |
Niigata Matoba New Plant: Detail: Third domestic plant to raise output of liquid encapsulants and electronic adhesives; goal of 2.5x FY2022 capacity by FY2032; about JPY 25 billion including a JPY 5 billion subsidy; Status: Construction July 2025 to August 2027
Overseas investment acceleration: Detail: Management said in 2026 that overseas investment would accelerate; Status: Under way; overseas office relocations announced July 2026
US-JOINT consortium: Detail: Builds real test packages with US customers instead of relying on simulation, to shorten design cycles for underfill and LCM; Status: Active; Union City R&D centre operating
Carbon neutrality: Detail: SBT 1.5°C approval (2024); 2050 carbon-neutrality policy (2025); heat-recovery heat pump; rooftop solar; Status: Under way
Smart agriculture business: Detail: DOOR LAB (2024); DOOR base planned for 2028; industry–academia–government collaboration on production efficiency; Status: Under way, behind the original 2026 opening target
Regional infrastructure support: Detail: Acquisition and lease of an aircraft to Niigata-based Toki Air; Status: Ongoing
Brand building: Detail: Brand movies, the second released in July 2026, made with the animation studio MAPPA; Status: Ongoing
Funding resilience: Detail: Commitment line with Daishi Hokuetsu Bank (April 2026); Status: In place
Medium-term targets
NAMICS publishes no medium-term revenue, margin or return targets. Its only quantified operating target is capacity: 2.5x the FY2022 level by FY2032. The CSR Report 2025 has a medium-term plan heading but no published content.
Products & Services
NAMICS publishes product categories rather than a public price list. Pricing is negotiated per qualification and is not publicly disclosed for any product.
Insulating materials
| Product | Description | Key capabilities | Target customers | Origin / latest |
|---|---|---|---|---|
| CHIPCOAT capillary underfill | Liquid epoxy-based underfill that flows by capillary action under flip-chip dies and cures to bond die and substrate | Fast flow in narrow bump gaps; stress relief for solder joints; moisture resistance; formulations for large-body and high-bump-count packages | Foundries, IDMs and OSATs making flip-chip BGA, 2.5D/3D and AI/HPC packages | High-purity cleanroom production since 1984; current grades recognised by Intel ("Excellence in Underfill Development", 2025 and 2026) and TSMC (advanced packaging, 2024) |
| CHIPCOAT liquid encapsulants | Liquid encapsulants and glob-top materials that protect chips and wires | High purity, low ionic contamination, protection from heat, dust and vibration | Semiconductor and module assemblers | Core line since the 1980s; NAMICS says it pioneered liquid encapsulants and holds about 40% of the global market |
| Liquid compression molding (LCM) materials | Liquid encapsulants for compression molding of wafer-level and panel packages | Low warpage, fine-gap filling | Advanced packaging lines | Being evaluated with customers through US-JOINT (2025) |
| Overcoat materials | Protective insulating overcoats for components and circuits | Moisture and environmental protection | Passive component and circuit makers | Long-standing line; under current development |
| ADFLEMA | Film-form materials made in a dedicated plant | Film format for laminating processes | Packaging and substrate customers | Launched 2006; dedicated plant 2011; explosion-proof film-encapsulant plant (JPY 2 billion) announced 2018 |
| Substrate and thick-film insulating materials | Insulating pastes and materials for substrates and thick-film circuits | Dielectric performance, printability | Substrate and hybrid-circuit makers | Descended from OHMCOAT (1964) |
| UV-curable insulating materials | Light-curing insulating adhesives and coatings | Fast low-temperature cure | Device and module assemblers | First developed 1987 |
| Silicon photonics adhesive | Optical-grade adhesive for photonic packaging | Optical alignment stability, low outgassing | Optical transceiver and co-packaged optics makers | Current development line |
| Adhesives (general electronics) | Structural and functional adhesives for components | Varied cure profiles and adhesion | Electronics assemblers | Broad line |
Conductive materials
| Product | Description | Key capabilities | Target customers | Origin / latest |
|---|---|---|---|---|
| UNIMEC | Thermosetting conductive pastes (silver-filled polymer systems) | Low-temperature cure, conductivity, adhesion to plastics and ceramics | Passive components, die-attach, circuits | Commercialised 1981 |
| HIMEC | Fired (high-temperature) conductive pastes | Electrodes and terminations fired into ceramics | Capacitors, resistors and other ceramic component makers | Developed 1971; NAMICS's first conductive product |
| KINOMEC | Stretchable conductive paste | Stays conductive under strain | Wearables, flexible and printed electronics | Current development line |
| XCH9207 series | Air-curing copper paste | Copper conductor cured in air without a reducing atmosphere; lower cost than silver | Component and circuit makers seeking silver substitution | Featured in CSR Report 2025 |
| Conductive adhesives and films | Isotropic conductive adhesives and conductive films | Solder alternatives; low-temperature joining | Device and module assemblers | Broad line; nano-powder and solder-replacement adhesive research with universities |
| Silver sintering die-attach materials | Pastes for high-temperature, high-reliability die attach | Thermal and electrical conductivity for power devices | Power semiconductor and automotive makers | Market research lists NAMICS among global suppliers of silver sintering die-attach materials |
DIEMAT-branded and glass products
| Product | Description | Target customers | Origin |
|---|---|---|---|
| Thermally conductive die-attach adhesives | High-thermal-conductivity adhesives for electronics and photonics | Microelectronics, RF and photonics packagers | DIEMAT, founded 1988; acquired 2008 |
| Low-temperature sealing glasses and glass preforms | Glass formulations and preforms for hermetic sealing | Hermetic package, sensor and feedthrough makers | DIEMAT line; glass preforms are listed as a current NAMICS product |
Non-materials activities
| Activity | Description | Status |
|---|---|---|
| Smart agriculture | DOOR LAB cultivation research laboratory (Kita-ku, Niigata) and a planned agricultural innovation base, DOOR (Nishikan-ku, Niigata), with smart farm, restaurant and hands-on farm | DOOR LAB completed 2024; the DOOR base is now planned for 2028 |
| Aircraft leasing support | Owns Toki Air's third aircraft (ATR42-600) and leases it to the airline | In service since April 2025 |
Financial Narrative
Disclosure scope
NAMICS is unlisted and files no securities reports. It publishes annual net sales in its recruiting and corporate profiles, and group sales in its CSR reports. Gross profit, operating income, EBITDA, pre-tax and net income, EPS, dividends, the balance sheet, cash flows and all derived ratios are not publicly disclosed. Two qualitative markers point to strong profitability. Nikkei describes NAMICS as "highly profitable" in its niches. The company's recruiting profile states that it has not reported a loss in the past ten years.
Revenue — five years
Non-consolidated figures come from company recruiting profiles. Group figures come from the CSR Report 2025 and are rounded to JPY 100 million.
Earlier non-consolidated sales were JPY 35.2 billion (FY3/2018), JPY 32.0 billion (FY3/2019) and JPY 36.3 billion (FY3/2020).
Trend commentary
FY3/2019–FY3/2020: smartphone plateau. Sales dipped from JPY 35.2 billion to JPY 32.0 billion in FY3/2019, when the smartphone cycle slowed, then recovered to JPY 36.3 billion. That was a muted payoff for the capacity added at head office in 2017.
FY3/2021–FY3/2022: pandemic electronics boom. Sales grew 21.5% and then 26.8%, to JPY 55.9 billion. Consumer electronics, data-centre build-outs and passive component stockpiling all boosted demand for underfill and pastes. Overseas sales were about 80% of the total by FY3/2022.
FY3/2023: inventory correction. Sales were flat at JPY 56.0 billion (+0.2%) as the semiconductor and passive component inventory correction took hold. Even so, NAMICS did not shrink, which suggests that new AI and HPC package qualifications offset the consumer weakness.
FY3/2024: AI ramp begins. Sales rose 19.7% to JPY 67.1 billion. Group sales rose 21.2% to JPY 71.9 billion. This was the first year driven by GPU and AI accelerator demand.
FY3/2025: inflection. Non-consolidated sales rose 52.4% to a record JPY 102.2 billion. Group sales rose 53.7% to JPY 110.5 billion. Nikkei attributes the rise to underfill demand for GPUs and AI-related semiconductors, on top of the long-running trend toward thinner smartphones. The group–parent gap widened from JPY 4.8 billion to JPY 8.3 billion, which points to rapid growth at the Taiwan plant, close to the Taiwanese advanced-packaging cluster. The FY3/2025 step-up also coincided with NAMICS receiving top supplier awards from both TSMC (December 2024) and Intel (April 2025).
FY3/2026: outlook. In November 2025 the president said sales were likely to set another record unless exchange rates moved sharply. With about 89% of sales overseas, yen weakness raises reported yen sales; a stronger yen would reduce them. Final FY3/2026 sales are not publicly disclosed.
Profitability, balance sheet, cash flow and ratios
None of the following is publicly disclosed for any of the five years: gross profit, operating income, EBITDA, pre-tax income, net income, EPS, dividends per share, margins, total assets, cash, debt, net debt, equity, goodwill and intangibles, working capital, operating cash flow, capex, free cash flow, dividends paid, buybacks, ROE, ROA, ROIC, current ratio, debt/equity, net debt/EBITDA, interest coverage, asset turnover and cash conversion cycle.
The capital-investment programme does show some figures:
The Matoba project has grown from about JPY 8 billion for phase 1 when announced in 2023 to about JPY 25 billion in the large-scale growth investment subsidy plan. Financing combines own funds and bank borrowing, and the company signed a commitment line with Daishi Hokuetsu Bank in April 2026. At about JPY 25 billion, the Matoba plant equals roughly 23% of FY3/2025 group sales, the largest single investment in the company's history.
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansFinancial Detail
Key Financials and Margin Analysis (%)
| Metric | FY3/2021 | FY3/2022 | FY3/2023 | FY3/2024 | FY3/2025 |
|---|---|---|---|---|---|
Net sales, non-consolidated (JPY Mn) | 44,097 | 55,908 | 56,020 | 67,051 | 102,157 |
Net sales growth, non-consolidated (%) | 21.5 | 26.8 | 0.2 | 19.7 | 52.4 |
Group sales incl. Taiwan plant (JPY Mn) | 46,100 | 58,300 | 59,300 | 71,900 | 110,500 |
Group sales growth (%) | — | 26.5 | 1.7 | 21.2 | 53.7 |
Difference between group and non-consolidated sales (JPY Mn) | 2,003 | 2,392 | 3,280 | 4,849 | 8,343 |
Valuation Snapshot
| Metric | Value |
|---|---|
Non-consolidated revenue CAGR, FY3/2021–FY3/2025 (%) | 23.4 |
Group revenue CAGR, FY3/2021–FY3/2025 (%) | 24.4 |
Non-consolidated revenue CAGR, FY3/2020–FY3/2025 (%) | 23.0 |
Investment Details
| Investment | Amount | Timing |
|---|---|---|
Head-office production building (about 11,700–12,000 m²) | About JPY 9 billion | Completed May 2017, fully running by 2019 |
Explosion-proof film-encapsulant plant at head office | About JPY 2 billion | Announced 2018 |
Niigata Matoba New Plant, phase 1 (as announced July 2023) | About JPY 8 billion | Announced 2023 |
Niigata Matoba New Plant (as set out in the subsidy application) | About JPY 25 billion in total, of which buildings about JPY 20 billion (JPY 5 billion from a national subsidy) and equipment about JPY 5 billion | Construction 15 July 2025 to 31 August 2027 |
DOOR agricultural base | About JPY 4 billion | Announced 2022; opening now planned for 2028 |
Revenue by Region (%) and Revenue by Region
| Metric | FY3/2022 | FY3/2025 |
|---|---|---|
Overseas share of group sales (%, approx.) | 80 | 89 |
Domestic share of group sales (%, approx.) | 20 | 11 |
Implied overseas group sales (JPY Mn, approx.) | 46,640 | 98,345 |
Implied domestic group sales (JPY Mn, approx.) | 11,660 | 12,155 |
Metric | Value | — |
Implied overseas sales CAGR, FY3/2022–FY3/2025 (%) | 28.2 | — |
Implied domestic sales CAGR, FY3/2022–FY3/2025 (%) | 1.4 | — |
Capital Markets
| Item | Detail |
|---|---|
Share capital | JPY 80 million |
Equity market listing | None; no IPO under consideration according to management (2025) |
Credit ratings (Moody's, S&P, Fitch, R&I, JCR) | None assigned publicly |
Bank facilities | Commitment line with Daishi Hokuetsu Bank (April 2026); amount not publicly disclosed |
Public funding | About JPY 5 billion national subsidy toward the Matoba plant building (about JPY 20 billion) |
Other funding for Matoba | About JPY 5 billion of equipment and excess construction cost funded from own resources and bank borrowing |
Analyst Conclusions
Management guidance
FY3/2026: the president said in November 2025 that sales were likely to set another record unless exchange rates moved sharply. No numeric guidance has been published.
Capacity: 2.5x the FY2022 production capacity by FY2032, with Matoba STEP1 completing in August 2027.
Strategy: faster overseas investment in 2026 and the start of a "new stage" after the 80th anniversary.
Environment: Scope 1+2 down 42% by 2029 and Scope 3 down 30% by 2032; carbon neutral by 2050.
Because NAMICS is private, there are no analyst consensus forecasts. Third-party market forecasts imply growth of 7.3% a year for general underfill (2025–2030) and 16.8% a year for chiplet underfill (2026–2036).
Bull case
-
AI packaging pulls through underfill value. If AI/HPC accounts for about 41% of chiplet-underfill demand and that market grows at about 17% a year, NAMICS's 40% share and its Intel and TSMC recognition could sustain growth above 15%, well ahead of the general underfill market.
-
Capacity arrives as demand peaks. Matoba STEP1 (20,421 m², August 2027) and the 2.5x capacity target would let NAMICS take share from peers with tight capacity, with half of the building cost subsidised.
-
US and photonics optionality. US-JOINT, Intel's 2025 and 2026 awards and the silicon-photonics adhesive line put NAMICS in position for US on-shored packaging and co-packaged optics.
Bear case
-
AI cycle digestion. Sales grew only 0.2% in the FY3/2023 inventory correction. A pause in AI accelerator demand around 2027 would arrive just as Matoba adds fixed costs.
-
Scale disadvantage. Resonac's semiconductor segment is about five times NAMICS's sales and growing 13.7% with a 21.4% margin. Larger rivals could out-invest NAMICS in next-generation underfill and LCM.
-
Concentration and execution risk. Production is concentrated in Niigata and Taiwan, exchange-rate exposure is 89%, the Matoba budget has roughly tripled, and capital is going to non-core agriculture and aviation. Several of these risks could hit together.
Key catalysts (next 12 months)
| Expected timing | Catalyst | Why it matters |
|---|---|---|
| By mid-2027 (disclosure timing) | Publication of FY3/2026 sales | Confirms whether a second record year was achieved after the 52% jump |
| Late 2026 | TSMC 2026 Supply Chain Management Forum awards | Repeat recognition would confirm NAMICS's position in TSMC's advanced packaging |
| Q1 2027 | Intel 2027 EPIC Supplier Awards | A third consecutive underfill award would confirm a durable position |
| During 2027 | Matoba STEP1 construction milestones (completion due 31 August 2027) | Determines when capacity becomes available |
| Ongoing | AI accelerator package ramps at foundries and OSATs | Main driver of underfill volume and value |
| Ongoing | US-JOINT customer evaluations of next-generation underfill and LCM | Early sign of new US design-ins |
| Sep 2026 / Sep 2027 | CSR Report releases | New sales, emissions and workforce figures |
| Ongoing | Toki Air finances and NAMICS's continued support | Size of non-core exposure |
By mid-2027 (disclosure timing): Catalyst: Publication of FY3/2026 sales; Why it matters: Confirms whether a second record year was achieved after the 52% jump
Late 2026: Catalyst: TSMC 2026 Supply Chain Management Forum awards; Why it matters: Repeat recognition would confirm NAMICS's position in TSMC's advanced packaging
Q1 2027: Catalyst: Intel 2027 EPIC Supplier Awards; Why it matters: A third consecutive underfill award would confirm a durable position
During 2027: Catalyst: Matoba STEP1 construction milestones (completion due 31 August 2027); Why it matters: Determines when capacity becomes available
Ongoing: Catalyst: AI accelerator package ramps at foundries and OSATs; Why it matters: Main driver of underfill volume and value
Ongoing: Catalyst: US-JOINT customer evaluations of next-generation underfill and LCM; Why it matters: Early sign of new US design-ins
Sep 2026 / Sep 2027: Catalyst: CSR Report releases; Why it matters: New sales, emissions and workforce figures
Ongoing: Catalyst: Toki Air finances and NAMICS's continued support; Why it matters: Size of non-core exposure
Analyst verdict
NAMICS is an unusual company in Japan's semiconductor-materials sector: a private, third-generation family company from Niigata that has become one of the most important suppliers in back-end AI packaging. The evidence for its position is strong even without published profits. NAMICS says it holds about 40% of the global market for liquid encapsulants and underfill. Intel has named it for "Excellence in Underfill Development" two years running, and TSMC recognised it in 2024 for technology collaboration and production support in advanced packaging. Few suppliers of any size hold both distinctions, and NAMICS holds them with group sales of about JPY 110 billion.
Its growth record reflects real market pull rather than acquisitions. Non-consolidated sales have compounded at about 23% a year since FY3/2021, reaching JPY 102.2 billion in FY3/2025 after a 52% jump. Implied domestic sales have barely moved over that period, so almost all of the increase has come from overseas customers, especially in Taiwan and the United States. Management's response has been to commit about JPY 25 billion to the Matoba plant, the largest investment in the company's history, financed with a subsidy, bank facilities and retained earnings.
The main uncertainties are concentration and disclosure. NAMICS depends on a few leading-edge packaging programmes, on production sites in Niigata and Taiwan, and on a weak yen. Investments in agriculture and aviation show a strong regional commitment but bring no clear financial return. Because the company does not publish profits or balance-sheet figures, counterparties must judge its resilience from its operating record: no losses in the past ten years, high customer recognition, and its ability to fund a large expansion. The 2027–2028 period, when Matoba capacity arrives and AI packaging demand may normalise, will be the real test.
Overall, NAMICS looks like a structurally advantaged niche leader with long-term ownership and strong momentum. Its main risks are concentration and timing, not technology. For customers, competitors and market analysts, it should be treated as a core strategic supplier in global underfill and liquid encapsulation, not as a regional specialist.
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansExecutive Leadership
Board of Directors
| Name | Title | Tenure | Background |
|---|---|---|---|
Toshinobu Odajima (小田嶋 壽信) | President and Representative Director | President since 2006 | Third-generation owner-manager and grandson of the founder. He planned the succession with his father soon after joining the company. Since taking over he has reviewed the cost structure and strengthened per-product business plans, and sales have grown about fivefold |
Juichi Odajima (小田嶋 壽一) | Former Representative Director (from 1977) and Chairman (from 2006) | 1977 onward | Second generation; led the 1980 exit from general paints into electronic pastes |
Toshiaki Odajima (小田嶋 壽明) | Founding Representative Director | 1,947 | Founder; moved the family business from food sales into paint |
Ken Araujo | Vice President, Sales & Marketing, NAMICS Technologies (US) | Current (2025) | Leads NAMICS's participation in US-JOINT and US customer evaluations of next-generation packaging materials |
Competitive Landscape
Key Competitors
| Competitor | Headquarters | Overlap with NAMICS | Relative positioning |
|---|---|---|---|
Henkel (Adhesive Technologies; Loctite/Eccobond lines) | Germany | Capillary underfill, die-attach, encapsulants, conductive adhesives | Main global rival in underfill; much larger and broader adhesives business; competes on large-body underfill evidence and packaging validation |
Resonac (formerly Showa Denko Materials / Hitachi Chemical) | Japan | Underfill, epoxy molding compounds, die-attach films, substrate materials | Broadest Japanese back-end materials portfolio; also the convenor of US-JOINT, where NAMICS is a partner |
Shin-Etsu Chemical | Japan | Underfill, encapsulants, silicone materials | Very large, diversified materials group with deep resin chemistry |
Panasonic Industry | Japan | Underfill and encapsulants | Strong in Japanese electronics assembly; listed among the top Japanese underfill vendors |
Sumitomo Bakelite | Japan | Epoxy molding compounds, underfill | Leader in molding compounds; overlaps in encapsulation |
Nagase ChemteX | Japan | Liquid encapsulants, underfill | Specialty epoxy formulator |
Kyocera | Japan | Molding compounds, encapsulation resins, die-attach | Diversified; focuses on resin design and reliability support |
Won Chemical | South Korea | Underfill | Regional underfill supplier serving Korean customers |
MacDermid Alpha Electronics Solutions | United States | Underfill, sinter die-attach, solder materials | Assembly-materials specialist |
H.B. Fuller | United States | Electronic adhesives, underfill | Adhesives generalist |
Heraeus Electronics | Germany | Silver sintering die-attach, conductive pastes | Leader in sintering and thick-film pastes |
Indium Corporation | United States | Solder, sinter and underfill-adjacent materials | Assembly materials |
Zymet, YINCAE Advanced Materials | United States | Underfill, reworkable underfill | Niche specialists |
Darbond, Yantai-based suppliers | China | Underfill, adhesives | Low-cost domestic Chinese alternatives |
Peer Comparison FY2025
| Company | Latest fiscal year | Revenue | Latest growth | Profitability | Position in liquid underfill |
|---|---|---|---|---|---|
NAMICS | FY3/2025 | JPY 102.2 billion (non-consolidated); JPY 110.5 billion (group) | +52.4% (non-consolidated) | Not publicly disclosed; described as highly profitable and loss-free for ten years | About 40% global share; recognised for underfill by Intel and TSMC |
Henkel | FY2025 (December) | EUR 20,495 million (group) | -5.1% nominal, +0.9% organic; Adhesive Technologies +1.5% organic | Adjusted return on sales 14.8% | Main global peer in underfill |
Resonac | FY2025 (December) | JPY 1,347.1 billion (group); Semiconductor & Electronic Materials JPY 506.3 billion | Group -3.2%; Semiconductor & Electronic Materials +13.7% | Semiconductor & Electronic Materials core operating margin 21.4% | Broad back-end portfolio; partner in US-JOINT |
Shin-Etsu Chemical | FY3/2026 | JPY 2,574.0 billion (group); Electronic Materials JPY 1,015.8 billion | Group +0.5% | Electronic Materials operating margin 33.9%; group 24.7% | Diversified; underfill is a small part of the group |
Recent Developments
NAMICS has disclosed no litigation, regulatory actions, layoffs, guidance revisions or restructurings during the period.



