Sprintex Limited Overview
Sprintex is a Perth-headquartered, China-manufacturing micro-cap engineering company that has spent the last five years converting itself from a loss-making maker of twin-screw automotive superchargers into a supplier of ultra-high-speed, oil-free electric air-moving machinery. Its three live platforms are (i) "Jet Blowers" (G-Series, GA and GR turbo blowers from ~4 kW to 90 kW-plus) sold mainly for wastewater aeration and aquaculture through exclusive country distributors; (ii) high-speed mechanical vapour recompression (MVR) compressors and PLC control systems, chiefly for Dutch partner Mest Water's ZLD-UP manure-processing platform; and (iii) air compressors for hydrogen fuel-cell systems in stationary, data-centre, marine and aviation applications. FY2026 revenue was only A$3.46m, but contracted Mest Water orders of €25.71m (A$42.09m) deliverable to June 2028 are roughly twelve times that figure. The investment case therefore rests on execution of a validation-dependent order book by a capital-constrained company with negative equity and a going-concern qualification.
Company's own description (FY2026 Annual Report)
In its FY2026 Directors' Report, Sprintex states that its principal activity is the manufacture and distribution of clean air compressors with a particular focus on industrial air and hydrogen fuel-cell applications, and that it specialises in the engineering, development and manufacture of ultra-high-speed electric motors, blowers and clean-air compressor systems. Management describes FY2026 commercial activity as concentrated on three technology platforms: industrial Jet Blowers; high-speed MVR compressor and control systems for environmental applications; and air compressors for hydrogen fuel-cell systems. The FY2025 report described the company as dedicated to energy-efficient solutions for industrial and automotive sectors, positioning the G Series blowers for wastewater treatment, aquaculture, paper milling and pharmaceuticals.
Independent characterisation
Sprintex is best understood as a sub-scale original equipment manufacturer (OEM) of high-speed centrifugal turbomachinery built around a common core competence — high-speed permanent-magnet motors, air-foil or high-speed bearing systems, compressor wheels and power electronics/controls — which it packages into three end products. Its manufacturing is carried out almost entirely at its wholly owned plant in Kunshan, Jiangsu Province, China (Sprintex Energy Technology (Suzhou) Co., Ltd), with a second plant in Malaysia (Sprintex Clean Air (Malaysia) Sdn. Bhd.) transitioning from legacy supercharger production to Jet Blower assembly. Corporate headquarters in Western Australia is now a small administrative and listing shell: Australian non-current assets were just A$1,247 at 30 June 2026 (FY2026 AR Note 5c).
Business and revenue model
| Dimension | Characterisation |
|---|---|
| Revenue type | Almost entirely product sales recognised at a point in time (FY2026 AR Note 6: "All of the revenue for the Group is derived at a point in time"). Minor non-recurring engineering (NRE) fees embedded in development contracts (e.g., the €620k Mest evaluation contract "including NRE fees", FY2025 AR) |
| Service / subscription / licensing | None reported as separate revenue lines. An AIoT monitoring platform ("IntelHydro") is referenced in the February 2026 India announcement with distributor Euroteck, but no recurring revenue is disclosed. Co-development with Bosiwei (August 2026) preserves Sprintex's compressor IP rather than licensing it |
| Go-to-market | Jet Blowers: exclusive in-country distributors with performance-based minimum purchase commitments (India, Türkiye, UK, China private label, Bangladesh, Saudi Arabia, Taiwan). MVR: direct OEM supply to Mest Water. Fuel-cell compressors: direct supply to fuel-cell system developers plus an exclusive Korean distributor |
| Value-chain position | Tier-1 component/sub-system supplier: Sprintex supplies the compressor/blower and controls; integrators (Mest Water, Euroteck, fuel-cell stack makers) own the end system and customer relationship |
| Customer types | Environmental-technology OEMs (Mest Water), wastewater engineering contractors and distributors, municipal utilities (via distributors — e.g., Delhi Jal Board Kondli STP), aquaculture equipment suppliers (BD Compressor, Tassal via channel), semiconductor fabs (TSMC trial via Shing Yu), fuel-cell developers (Doosan, Intelligent Energy, K-Fuel Cell, Vinssen, Global Nova), aviation start-ups (Stralis Aircraft), legacy automotive aftermarket dealers |
| End-markets | Municipal and industrial wastewater aeration; agricultural manure processing (EU nitrogen/ammonia regulation); aquaculture and aquaria; industrial evaporation (MVR, China); hydrogen fuel cells (stationary backup, data centres, marine, aviation); legacy automotive aftermarket (being exited) |
Mix shift
The FY2026 segment note shows E-Compressors (which houses Jet Blowers, MVR and fuel-cell compressors) at A$3.135m (90.5% of revenue) and legacy Superchargers at A$0.328m (9.5%). Two years earlier (FY2024), Superchargers were the larger segment at 59.1%. The pivot is therefore essentially complete at the revenue line, though the cost base still carries the overhead of three country operations.
Strategy
Stated strategic themes (FY2026 AR "Outlook")
Management frames FY2027 around execution: (1) complete validation of the larger Mest Water systems and progress serial deliveries under contracted orders to June 2028; (2) convert the expanded distributor network and customer evaluations (India pipeline, UK water-utility procurement, TSMC trial, Türkiye, Bangladesh, Saudi Arabia) into recurring Jet Blower orders; (3) advance fuel-cell compressors through trials in stationary power, data centres, marine and aviation; and (4) scale manufacturing capacity in line with customer requirements. The risk section describes deliberate diversification of its high-speed motor technology from the "embryonic" hydrogen market into more mature industrial applications (wastewater, food processing, painting, packaging, plastics, printing and paper).
Strategic initiatives announced in the last 24 months (Oct 2024 – Oct 2026)
| Initiative | Date | Description / targets |
|---|---|---|
| Exit from automotive manufacturing | Resolved FY2025; completed early 2026 | Discontinue Malaysian supercharger production; convert plant to jet blowers; sell legacy machines |
| Malaysia second manufacturing base | MIDA approval FY2025; validation FY2026 | Reduce single-location (China) dependency; exploit FTAs; deliveries from Malaysia were expected from last quarter of calendar 2025 |
| Mest Water ZLD-UP programme | Evaluation June 2024 → orders Dec 2025 / June 2026 | €25.71m contracted to June 2028; earlier aspirational target of 1,000 units per year by FY2027 (~A$36m annual revenue) stated in FY2025 AR |
| Global exclusive distribution network | FY2025–FY2026 | India, Türkiye, UK, China (private label), Bangladesh, Saudi Arabia, Taiwan, Korea, each with minimum commitments |
| CE / UL certification | FY2025 | CE achieved; UL/cUL in process to open North America |
| GR Series and larger blowers (up to 110 kW+) | FY2025–FY2026 | Move up-market into municipal-scale aeration |
| Fuel-cell compressors for data centres | June 2026 | Trials with Intelligent Energy, K-Fuel Cell, Doosan Mobility Innovation |
| China industrial MVR | 12 Aug 2026 | Co-development with Bosiwei targeting what the company termed a US$4.5bn MVR market; China has >2,600 active industrial MVR installations |
| India localisation | Under evaluation FY2026 | Local assembly for "Product of India" status once >1,000 units per year |
| IntelHydro AIoT | Feb 2026 | IoT-enabled monitoring with Euroteck |
Sustainability/ESG commitments: none formally stated (no emissions targets); the product proposition is energy-efficiency-led (50–72% energy savings claimed versus side-channel/rotary-lobe blowers; 20.5% at Kondli).
Cost programmes: no formal cost-reduction programme with targets disclosed.
Medium-term financial targets / guidance: No formal revenue or earnings guidance is provided in the FY2026 AR. Historical informal targets (FY2026 operating profitability; ~A$1m/month Mest revenue from March 2026) were missed. The only quantified forward figure is the contracted €25.71m Mest order book deliverable by June 2028.
Products & Services
E-Compressors segment — Industrial Jet Blowers
| Product | Description & key specifications | Target customer | Launch / status | Pricing (disclosed or derived) |
|---|---|---|---|---|
| G15 | ~3.5–4 kW high-speed, oil-free electric jet blower. Field trials: one G15 replaced three 350 mbar side-channel blowers at Ilknak Aquaculture (Türkiye), cutting energy ~70% (3.63 kWh vs 13.18–13.47 kWh); at SEA LIFE Sunshine Coast a 4 kW G15 replaced a side-channel blower, power 9.7 kW → 2.7 kW (72% saving), noise 84 dB → ~71 dB, service interval 10,000 → 18,000 hours; at Tassal one 3.5 kW unit replicated nearly three 2.2 kW rotary lobe blowers | Aquaculture, aquaria, small wastewater plants | In production; automated end-of-line testing introduced FY2025; listed in UN WIPO GREEN database | Demonstration batch of 150 units for Euroteck at US$206k (≈US$1,373/unit, explicitly below standard pricing) — FY2026 AR |
| G15 private label (China) | G15 supplied under BD Compressor's brand into pond aquaculture | Chinese aquaculture farmers via BD Compressor | Agreement executed July 2025, 3-year term | Minimum RMB44.08m (A$9.18m at Aug-2026 FX) over 3 years |
| G25 (G820) | 25 kW-class blower; CE Machinery Directive 2006/42/EC certified | Wastewater, industrial | CE certified FY2025; automated EOL testing | — |
| G26 | 25 kW high-efficiency turbo-blower | Wastewater, industrial | Announced September 2023 | — |
| G37 (G835) | 37 kW-class blower, CE certified | Municipal/industrial wastewater | FY2025 | — |
| G55 (G850) | 55 kW-class blower, CE certified | Municipal/industrial wastewater | FY2025 | — |
| GA37-835 | 37 kW GA-series jet blower | Semiconductor wastewater aeration (TSMC paid trial via Shing Yu) | Trial order June 2026 | Two units for US$30k (≈US$15k/unit) |
| GR90 | 90 kW GR-series high-capacity blower. Seven GR90s commissioned at Delhi Jal Board's 45 MGD Kondli STP, delivering a 20.5% energy reduction versus prior configuration | Large municipal STPs | GR Series launched FY2026 | — |
| X90 / X132 | Larger municipal blower models (90 kW and 132 kW class) ordered by Euroteck in first production units | Municipal wastewater (India) | First production orders FY2025/early FY2026 | — |
| Larger models up to 110 kW | Scheduled launch October 2025 per FY2025 AR | Large municipal | Planned launch Oct 2025 (status of full range not separately confirmed) | — |
| High-power turbo blowers 11–675 kW | Specified in ENWA/Washnah tender for King Salman International Airport wastewater works (~30 units, >A$5m potential value) | Saudi infrastructure | Tender submitted; no award at 30 June 2026 | — |
| GS27MHT | First Sprintex unit deployed at Mest Water (Netherlands), 2024 | Environmental process air | Delivered 2024 (Sep-2024 quarterly) | — |
| Upgraded PLC / MODBUS controls | Enhanced MODBUS compatibility for integration into complex industrial control systems | Industrial integrators | Upgrade reported Sep-2024 quarter | Bundled |
| IntelHydro AIoT platform (with Euroteck) | IoT-enabled monitoring for predictive maintenance and energy optimisation of blower installations in India | Indian WWTP operators | Announced 26 February 2026 | Not disclosed; no recurring revenue reported |
Certifications: CE (EU) obtained FY2025; UL / cUL (North America) certification processes commenced FY2025 — completion not confirmed in the sources reviewed.
E-Compressors segment — MVR compressor and control systems
| Product | Description | Customer | Status | Pricing |
|---|---|---|---|---|
| Sprintex-MW30 | Dedicated compressor operating on saturated steam; commissioned in the Netherlands before Mest's production ramp at its 31,000 m² Tubbergen facility | Mest Water | Commissioned FY2025 | Within €620k evaluation contract |
| MW20 / MW10 dual-wheel (dual-stage) compressors | Bespoke dual-wheel compressors raising ZLD-UP efficiency; management stated an extra €5k per stationary unit in revenue | Mest Water | Evaluation order revised to €705k (all 17 stationary systems upgraded to dual compressors) | +€5k/unit uplift |
| 1,000 kg/hr compressor system | Original evaluation configuration; LOI for 500 and 1,500 kg/hr variants | Mest Water | Evaluation 2024–2025 | €620k for 20 units incl. NRE (≈€31k/unit) |
| 800 kg/hr Modified Compressor System | Higher-capacity commercial configuration with greater independent control between ZLD stages, additional motor section, upgraded bearings, seals and compressor wheels; adapted to lower Dutch treatment temperatures | Mest Water (large farms) | Final validation in progress at 30 June 2026; 500 units ordered | €19.2m / 500 ≈ €38,400 per system (derived) |
| 300 kg/hr Compressor System | Smaller-format system for small farms/applications; first commercial units in production at Mest using 17 compressor/PLC sets already delivered | Mest Water; rental via Completerra B.V.; mobile Nutrifixer with Elweco-Medo B.V. | 200 units ordered June 2026 | €6.51m / 200 ≈ €32,550 per system (derived) |
| Mobile ZLD compressor | Compact high-efficiency compressor for truck-mounted 3,000 kg/hr mobile ZLD units for small farms | Mest Water / contractors | Mest commenced mobile processing after FY2025; one mobile evaluation system supplied | — |
| Integrated PLC control systems | Automated sensor integration, process control, fault handling and remote monitoring across the combined Mest/Sprintex system; validated October 2025 | Mest Water | 13 PLC systems shipped Dec 2025; 500 ordered Dec 2025 (superseded by June 2026 order structure) | Bundled with compressor systems |
| 30 kW MVR compressor (Bosiwei programme) | For co-developed sub-3-tonne industrial MVR evaporation systems; supplied at agreed pilot price; Sprintex retains core compressor IP. Reference case cited: replacement of legacy 110 kW Roots blowers with a 30 kW Sprintex MVR compressor | Jiangsu Bosiwei Chemical Equipment Engineering (China industrial evaporation) | Co-development agreement 12 August 2026; long-term supply agreement contemplated subject to testing | Pilot price not disclosed |
E-Compressors segment — Hydrogen fuel-cell air compressors
| Application / programme | Description | Counterparty | Status (30 June 2026) |
|---|---|---|---|
| Stationary backup power | Two sample compressors for testing in stationary hydrogen backup system | Doosan Corporation (Korea) | Sample/testing |
| Data-centre / micro-grid power (50 kW-class platforms, multi-stack scalable) | Trial and sample supply | Intelligent Energy (UK), K-Fuel Cell (Korea), Doosan Mobility Innovation (Korea) | Trial/evaluation; no commercial POs |
| Korean mobility and stationary (incl. marine, aviation) | Exclusive distribution | ChoisTechnics Corp. | Agreement March 2026; minimum US$100k/200k/350k over 3 years |
| Direct Korean customers | Ongoing supply | Vinssen Co., Ltd.; Global Nova Co., Ltd. | Retained outside Chois exclusivity |
| Hydrogen-electric aviation | Compressor integrated into H-120 fuel-cell powertrain | Stralis Aircraft | Development programme |
| US linear generator | >US$200k of clean-energy compressor units previously supplied | Unnamed US developer | Historical supply |
Specifications (flow, pressure ratio, power class) of individual fuel-cell compressor SKUs are not publicly disclosed in the sources reviewed.
Superchargers segment (legacy)
| Product | Description | Customer | Status |
|---|---|---|---|
| Sprintex twin-screw supercharger and bolt-on kits | Positive-displacement, mechanically driven helical twin-screw compressor; applications historically included Jeep (incl. Grand Cherokee), Dodge Challenger V6, Dodge Charger V6, Chrysler 300C V6, Ram 1500 V6, Toyota FT86 / Scion FR-S / Subaru BRZ, Mini Cooper S, Honda and others; CARB approved (2016) | Automotive aftermarket dealers (US-led) | In run-off. Malaysian automotive manufacturing discontinued by early 2026; inventory outside China fully impaired (gross finished goods A$2.95m, provision A$1.80m at 30 June 2026) |
Financial Narrative
Sources: FY2026 AR (FY2026 and FY2025 restated comparatives, five-year summary FY2022–FY2026); FY2025 AR (FY2024 comparatives, five-year summary FY2021–FY2025). FY2022 and FY2023 line items beyond revenue, net loss, EPS and net assets are not disclosed in the sources reviewed and are left blank. All AUD '000 unless stated.
Income statement
Notes: FY2021 revenue was A$574,854 and FY2021 net result a profit of A$127,636 (FY2025 AR five-year table), almost certainly reflecting one-off recapitalisation gains. FY2025 EBIT uses the FY2026 restated figure; the originally reported FY2025 operating loss was A$(5,063,176). FY2025 segment-reported EBITDA (A$(4,433,442)) includes A$267k of financial-liability gains excluded above. Diluted EPS equals basic because potential shares are anti-dilutive.
Margins and growth
Revenue CAGR: FY2022–FY2026 (4 years) = 62.8%; FY2023–FY2026 (3 years) = 50.2%; FY2021–FY2026 (5 years) = 43.2% (analyst calculations from reported revenue).
Commentary. Revenue more than doubled in FY2026 to A$3.46m, driven almost entirely by delivery of the Mest Water evaluation programme (A$1.5m / €926k recognised in H1 FY2026) and Indian Jet Blower orders. The half-year split is critical: H1 FY2026 revenue was A$2.71m, implying H2 FY2026 revenue of only ~A$0.75m. The second-half collapse occurred because the evaluation programme finished in December 2025 while commercial serial deliveries under the December 2025 order did not begin in FY2026 (weather delays in the Netherlands, live-manure field validation and resulting design changes). This contrasts with the cadence communicated in December 2025, when commentary on the order described roughly 20 systems per month (≈A$1m monthly revenue) from March 2026, rising to ~40 per month from November 2026, and management's expectation of operating profitability in FY2026 (as reported by Stocks Down Under). That expectation was not met.
Gross margin improved modestly to 35.5%, but this was flattered by Supercharger sales of fully impaired inventory (62.1% segment margin); E-Compressor gross margin was 32.8%, thin for proprietary high-speed turbomachinery and indicative of evaluation-stage pricing and low factory utilisation. The underlying cash operating cost base (employee, admin, distribution, R&D excluding share-based payments) was ~A$5.3m in FY2026, roughly unchanged from FY2025, so breakeven requires revenue of roughly A$15m at a 35% gross margin — consistent with what full-rate Mest deliveries would deliver.
Finance costs fell from A$1.08m to A$0.44m because FY2025 included A$0.71m of non-cash convertible-note finance charges. R&D dropped by half to A$0.98m as Mest development spending in FY2025 (materials/services A$1.48m) moved into production.
Balance sheet
Notes: FY2025 borrowings shown ex-derivative per the FY2026 presentation (FY2025 AR reported A$3,673,136 including the A$562,718 derivative). FY2023 cash from FY2024 cash-flow opening balance. All borrowings are classified current. No goodwill or capitalised development costs are carried. Accumulated losses reached A$89.42m at 30 June 2026 against contributed equity of A$83.44m.
Commentary. Sprintex has had negative equity at every balance date since FY2023 and a persistent working-capital deficit of A$3–5m. The deficit is funded by (a) customer deposits within trade payables (A$1.40m at 30 June 2025, mostly Mest prepayments), (b) related-party and shareholder convertible notes, and (c) small Chinese bank facilities. Net tangible assets per share were negative 0.42 cents at 30 June 2026 (Appendix 4E). Unrecognised deferred tax assets total A$14.49m, including A$9.94m of Australian tax losses (≈A$40m gross at 25%) and A$2.33m of Chinese losses.
Cash flow
Commentary. Operating cash burn has risen each year (A$3.5m → A$4.0m → A$4.7m) even as revenue grew, because receipts from customers (A$2.84m in FY2026) lag revenue and inventory was built ahead of the Mest programme (inventory up A$0.42m). Cumulative free cash outflow over FY2024–FY2026 was A$13.0m, funded by A$10.0m of cash equity and A$4.9m of net new borrowings. In addition, A$1.19m of FY2026 equity subscriptions was settled by offsetting shareholder loans and convertible notes rather than cash. The June 2026 quarter showed an improved operating outflow of A$833k (Appendix 4C, 30 July 2026), but this likely reflects working-capital timing rather than a structural change.
Ratios
Notes: ROE FY2022 uses average of FY2021 (A$2.84m) and FY2022 (A$1.17m) equity; ROE is n.m. for FY2023–FY2026 due to negative equity. ROIC, debt/equity and net debt/EBITDA are n.m. (negative invested capital/equity/EBITDA). FY2024 asset turnover uses closing assets (FY2023 total assets not disclosed in sources reviewed). Cash conversion cycle = DSO + DIO − DPO using trade receivables, inventory and trade payables; FY2026 trade payables were not separately disclosed in the portion of the FY2026 notes retrieved, so FY2026 CCC is blank. FY2026 DSO ≈ 28 days; DIO ≈ 188 days.
Commentary. The negative cash conversion cycle (−79/−80 days) should not be read as working-capital efficiency: it reflects trade payables equal to roughly a full year of cost of sales (DPO ≈ 364 days in FY2025), i.e., stretched supplier credit and customer deposits. Inventory days (~190–256) are long for a build-to-order business. Interest coverage is deeply negative and will remain so until EBIT turns positive.
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansFinancial Detail
Revenue by Segment
| Segment | FY2024 | FY2025 | FY2026 |
|---|---|---|---|
E-Compressors revenue (AUD K) | 489.2 | 895.6 | 3,135.0 |
Superchargers revenue (AUD K) | 707.0 | 614.0 | 328.0 |
Total revenue (AUD K) | 1,196.1 | 1,509.5 | 3,463.1 |
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansSegment Margins & Growth (%) and Revenue by Segment (%)
| Metric | FY2024 | FY2025 | FY2026 |
|---|---|---|---|
E-Compressors YoY growth (%) | — | 83.1 | 250.1 |
Superchargers YoY growth (%) | — | -13.2 | -46.6 |
E-Compressors share of revenue (%) | 40.9 | 59.3 | 90.5 |
Superchargers share of revenue (%) | 59.1 | 40.7 | 9.5 |
Results by Segment and Segment Margins & Growth (%)
| Segment | FY2024 | FY2025 | FY2026 |
|---|---|---|---|
E-Compressors EBITDA (AUD K) | -1,438.7 | -2,653.9 | -2,300.4 |
Superchargers EBITDA (AUD K) | -1,255.4 | -461.5 | -345.1 |
Corporate EBITDA (AUD K) | -999.8 | -1,318.0 | -2,281.0 |
Group segment EBITDA (AUD K) | -3,693.8 | -4,433.4 | -4,926.5 |
E-Compressors EBITDA margin (%) | -294.1 | -296.3 | -73.4 |
Superchargers EBITDA margin (%) | -177.6 | -75.2 | -105.2 |
Group Entities
| Entity | Jurisdiction | Function | Statutory year end |
|---|---|---|---|
Sprintex Limited | Australia | Listed parent, corporate HQ (Subiaco, WA) | 30 June |
Sprintex Energy Technology (Suzhou) Co., Ltd ("Sprintex China") | PRC (facility in Kunshan, Jiangsu) | Principal manufacturing, engineering, testing, application support | 31 December |
Sprintex Clean Air (Malaysia) Sdn. Bhd. | Malaysia | Former supercharger plant; transitioning to G-Series Jet Blower production | 30 June (not stated otherwise) |
Sprintex USA, Inc. | United States | Legacy supercharger sales/distribution; new two-year building lease from 1 December 2025 | 31 December |
Income Statement and Margin Analysis (%)
| Metric | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|---|
Revenue (AUD K) | 493.3 | 1,021.8 | 1,196.1 | 1,509.5 | 3,463.1 |
Revenue growth YoY (%) | -14.2 | 107.1 | 17.1 | 26.2 | 129.4 |
Cost of goods sold (AUD K) | — | — | 836.2 | 1,039.0 | 2,232.2 |
Gross profit (AUD K) | — | — | 359.9 | 470.6 | 1,230.9 |
Other income (AUD K) | — | — | 153.9 | 165.8 | 470.7 |
R&D expense (AUD K) | — | — | 980.9 | 1,945.5 | 981.3 |
Share-based payment expense (AUD K) | — | — | 79.1 | 61.6 | 1,275.5 |
Operating income / EBIT (AUD K) | — | — | -4,290.8 | -5,330.2 | -5,564.7 |
Depreciation and amortisation (AUD K) | — | — | 597.0 | 629.7 | 638.2 |
EBITDA (EBIT plus D&A) (AUD K) | — | — | -3,693.8 | -4,700.5 | -4,926.5 |
Finance costs (AUD K) | — | — | 207.3 | 1,081.2 | 444.3 |
Pre-tax income (AUD K) | -5,882.3 | -4,382.6 | -4,498.1 | -6,144.4 | -5,724.7 |
Net income (AUD K) | -5,882.3 | -4,382.6 | -4,498.1 | -6,144.4 | -5,724.7 |
EPS basic (AUD cents) | -2.5 | -1.7 | -1.12 | -1.08 | -0.85 |
EPS diluted (AUD cents) | -2.5 | -1.7 | -1.12 | -1.08 | -0.85 |
Dividends per share (AUD cents) | 0 | 0 | 0 | 0 | 0 |
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansMargin Analysis (%)
| Metric | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|---|
Gross margin (%) | — | — | 30.1 | 31.2 | 35.5 |
Operating margin (%) | — | — | -358.7 | -353.1 | -160.7 |
EBITDA margin (%) | — | — | -308.8 | -311.4 | -142.3 |
Net margin (%) | -1,192.4 | -428.9 | -376.1 | -407.0 | -165.3 |
Balance Sheet
| Metric | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|---|
Total assets (AUD K) | — | — | 4,485.8 | 3,891.8 | 3,953.6 |
Cash and equivalents (AUD K) | — | 19.3 | 1,908.2 | 390.1 | 557.6 |
Inventories (AUD K) | — | — | 344.6 | 729.0 | 1,148.0 |
Short-term borrowings (AUD K) | — | — | 4,278.2 | 3,110.4 | 3,375.6 |
Long-term borrowings (AUD K) | — | — | 0 | 0 | 0 |
Embedded derivative liability (AUD K) | — | — | 0 | 562.7 | 418.8 |
Lease liabilities total (AUD K) | — | — | 432.2 | 898.5 | 673.8 |
Net debt excl leases (AUD K) | — | — | 2,370.0 | 2,720.4 | 2,818.0 |
Total liabilities (AUD K) | — | — | 6,375.4 | 7,372.1 | 6,921.3 |
Total equity (AUD K) | 1,170.5 | -2,181.4 | -1,889.5 | -3,480.3 | -2,967.6 |
Goodwill and intangibles (AUD K) | — | — | 0 | 0 | 0 |
Working capital (AUD K) | — | — | -2,952.5 | -4,723.9 | -4,068.7 |
Cash Flow
| Metric | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|---|
Operating cash flow (AUD K) | — | — | -3,517.1 | -4,021.1 | -4,664.0 |
Capital expenditure (AUD K) | — | — | -243.2 | -505.9 | -84.9 |
Free cash flow (AUD K) | — | — | -3,760.3 | -4,527.0 | -4,748.8 |
Equity issued for cash (AUD K) | — | — | 1,508.7 | 4,533.8 | 3,936.3 |
Net borrowings drawn (AUD K) | — | — | 4,483.9 | -892.5 | 1,349.1 |
Lease principal repaid (AUD K) | — | — | -324.3 | -394.4 | -413.3 |
Dividends paid (AUD K) | 0 | 0 | 0 | 0 | 0 |
Share buybacks (AUD K) | 0 | 0 | 0 | 0 | 0 |
Returns & Leverage Ratios (%) and Financial Ratios (x)
| Ratio | FY2022 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|
ROE (%) | -293.0 | — | — | — |
ROA (%) | — | -100.3 | -157.9 | -144.8 |
Current ratio (x) | — | 0.53 | 0.30 | 0.38 |
Interest coverage EBIT to finance costs (x) | — | -20.7 | -4.9 | -12.5 |
Asset turnover (x) | — | 0.27 | 0.36 | 0.88 |
Cash conversion cycle (days) | — | -79 | -80 | — |
Revenue by Region
| Region | FY2024 | FY2025 | FY2026 |
|---|---|---|---|
Asia revenue (AUD K) | 65.7 | 447.1 | 1,127.5 |
United States revenue (AUD K) | 684.2 | 622.6 | 292.5 |
UK and EU revenue (AUD K) | 381.4 | 101.7 | 1,854.1 |
Australia revenue (AUD K) | 64.8 | 183.3 | 120.0 |
Other revenue (AUD K) | 0 | 154.8 | 68.9 |
Total revenue (AUD K) | 1,196.1 | 1,509.5 | 3,463.1 |
Region Margins & Growth (%) and Revenue by Region (%)
| Region | FY2024 | FY2025 | FY2026 |
|---|---|---|---|
Asia YoY growth (%) | — | 580.2 | 152.2 |
United States YoY growth (%) | — | -9.0 | -53.0 |
UK and EU YoY growth (%) | — | -73.3 | 1,723.6 |
Australia YoY growth (%) | — | 182.8 | -34.5 |
Asia share of revenue (%) | 5.5 | 29.6 | 32.6 |
United States share of revenue (%) | 57.2 | 41.2 | 8.4 |
UK and EU share of revenue (%) | 31.9 | 6.7 | 53.5 |
Australia share of revenue (%) | 5.4 | 12.1 | 3.5 |
Share Price and Share Count (millions)
| Metric | FY2022 | FY2023 | FY2024 | FY2025 | FY2026 |
|---|---|---|---|---|---|
Share price at 30 June (AUD) | 0.071 | 0.037 | 0.05 | 0.044 | 0.088 |
Shares on issue at 30 June (millions) | — | 267.7 | 531.6 | 628.6 | 702.2 |
Weighted average shares (millions) | — | — | 399.8 | 570.0 | 670.4 |
Market cap at 30 June (AUD Mn) | — | 9.9 | 26.6 | 27.7 | 61.8 |
Share Price & Returns
| Horizon | Approximate return | Basis |
|---|---|---|
1-year (Oct 2025 → 15 Oct 2026) | ≈ −14% | A$0.058 (pre-announcement price 30 Oct 2025) → A$0.050 |
3-year (Oct 2023 → Oct 2026) | ≈ +150% | ~A$0.02 (18 Oct 2023, StockLight) → A$0.050 |
5-year (Oct 2021 → Oct 2026) | ≈ −29% | ~A$0.07 (Nov 2021) → A$0.050 |
52-week range | ≈ A$0.042 – A$0.1025 | StockLight |
Since 30 June 2026 | ≈ −43% | A$0.088 → A$0.050 |
Valuation Multiples
| Multiple | Sprintex |
|---|---|
Market cap | ≈A$36m |
Enterprise value | ≈A$38–40m (market cap + borrowings A$3.4m + leases A$0.7m − cash A$0.6m, before July 2026 conversions/raises) |
EV / Sales (FY2026) | ≈11x |
EV / Contracted Mest order book (A$42m) | ≈0.9x |
P/E | n.m. (loss-making); vendor TTM P/E −9.4 (StockInvest.us) |
EV / EBITDA | n.m. (negative EBITDA) |
P/B | n.m. (negative book value) |
Capital Instruments
| Instrument | Principal | Rate | Maturity | Conversion terms |
|---|---|---|---|---|
CAHL convertible note | A$1,854,091 | 6% p.a. | 30 Jun 2027 (extension subject to shareholder approval) | Higher of A$0.03 or 20% discount to 15-day VWAP |
Sharewise-introduced convertible notes | A$1,075,000 issued; A$915,000 converted 1 Jul 2026; ≈A$160,000 remaining | 8% p.a., quarterly | 30 Jun 2027 | 10% discount to 15-day VWAP, floor A$0.072 |
Jiangsu Kunshan Rural Commercial Bank loan | RMB1.5m (A$321,564) | 3% p.a. | 19 Mar 2027 | — |
Jiangsu Kunshan Rural Commercial Bank loan | RMB1.5m (A$321,564) | 3% p.a. | 16 Jun 2027 | — |
Premium funding / other | Small | — | Within 12 months | — |
Lease liabilities | A$673,839 | — | A$357k within 1 year; A$370k 1–5 years (undiscounted) | — |
Analyst Conclusions
Management guidance
No numerical revenue, margin or profit guidance is given for FY2027. Management's stated near-term priorities are completing validation of the 800 kg/hr Mest system, commencing serial deliveries under the €25.71m orders (to June 2028), converting distributor pipelines, and scaling manufacturing. Revenue recognition is explicitly contingent on validation, production, delivery and customer acceptance.
Consensus expectations
None available (no sell-side coverage). As a mechanical reference only: if the €25.71m order book were delivered evenly over the 24 months from July 2026 to June 2028, it would imply ≈€12.9m (≈A$21m at the FY2026 AR rate of A$1 = €0.6108) per year — more than six times FY2026 revenue. Any slippage pushes this out further; this is an illustration, not a forecast.
Bull case
-
Order book conversion transforms the P&L: A$42m of contracted Mest orders against a cash operating cost base of ~A$5.3m means even partial delivery at ~35% gross margin would move the company to EBITDA breakeven or better.
-
Regulatory pull in the Netherlands and EU: RENURE approval, derogation withdrawal and subsidies for 10,000–12,000 farms, plus Completerra rental and Elweco-Medo mobile models, could broaden ZLD-UP adoption beyond the initial 700 contracted systems.
-
Optionality from blue-chip trials: a successful TSMC trial, UK water-utility tender, Saudi airport award, or a fuel-cell data-centre design-win (Intelligent Energy, Doosan) would each validate the platform with counterparties orders of magnitude larger than Sprintex, at a valuation (~A$36m) close to the contracted order book.
Bear case
-
Execution slippage is the pattern, not the exception: commercial deliveries guided from March 2026 had not started by year-end; H2 FY2026 revenue fell ~72% versus H1; FY2026 profitability expectations were missed.
-
Balance-sheet fragility forces dilution: negative equity of A$2.97m, A$4.66m annual operating burn, all debt current, notes converting at discounts to VWAP, and lapsed A$0.10 options suggest continued equity issuance at depressed prices (share count already up ~2.7× since FY2023).
-
Concentration and governance: dependence on one Dutch partner whose own scale-up is unproven, combined with a three-person board lacking independence and China-centred manufacturing/ownership, limits institutional appeal and amplifies key-person and partner risk.
Catalysts and monitorables (next 12 months)
| Timing | Catalyst / monitorable |
|---|---|
| By 31 Oct 2026 | September-quarter Appendix 4C: first evidence of serial Mest deliveries, receipts, cash runway |
| 31 Oct 2026 | Lapse of Class E director performance rights |
| Nov 2026 (expected) | AGM: shareholder approval of CAHL note extension; any new incentive grants |
| H2 CY2026 | Final validation of 800 kg/hr Mest configuration; start of serial production |
| 31 Dec 2026 | Class H performance rights vesting date (Apedaile) |
| Jan 2027 | December-quarter 4C |
| 14 Jan 2027 | Expiry of 2m A$0.12 options |
| Feb 2027 | H1 FY2027 Appendix 4D — first period with commercial Mest revenue (if delivered) |
| Mar / Jun 2027 | RMB bank loan maturities |
| Ongoing | TSMC trial outcome; UK water ITT result; King Salman airport award; UL certification; BD Compressor minimum-order compliance; Bosiwei pilot results; fuel-cell trial-to-PO conversion |
| 30 Jun 2027 | Convertible note maturities; Class F performance rights vesting hurdle |
Analyst verdict
Sprintex has done the hard part of a corporate pivot on paper: it has exited a structurally declining automotive supercharger business, rebuilt itself around a reusable high-speed motor and compressor platform, established low-cost manufacturing in China with a Malaysian back-up, and secured an order book — €25.71m (A$42.09m) from Mest Water — that dwarfs its A$3.46m FY2026 revenue and roughly equals its entire enterprise value. The distributor network assembled in under two years across eight markets, and trials with TSMC, Doosan and Intelligent Energy, show that the technology attracts serious counterparties.
The evidence, however, says the company has not yet proved it can deliver. Commercial Mest shipments slipped past the June 2026 year-end amid field-validation redesigns; second-half revenue collapsed to roughly A$0.75m; operating cash burn rose for a third straight year to A$4.66m; equity remains negative; all debt is current; and the auditor has flagged material going-concern uncertainty two years running. Distributor "minimum commitments" have so far produced modest orders. The share price at A$0.050 — down about 43% since 30 June and below the A$0.072 floor of the latest convertible — indicates the market is discounting both timing risk and further dilution. Governance (a three-member board, executive chair, no substantive independence) and concentration on a single Dutch partner add to the risk premium.
Our synthesis is that Sprintex is a binary, execution-driven micro-cap. The upside case is real and quantifiable: sustained deliveries of 20–40 Mest systems per month would plausibly carry the company to operating breakeven within FY2027–FY2028. But until quarterly reports show serial deliveries, cash receipts and narrowing burn, the default expectation should be continued capital raising at or below current prices. The single most important monitorable is the September and December 2026 quarterly cash-flow reports. Rating stance (non-advisory): speculative.
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansExecutive Leadership
Executive Leadership Team
| Name | Role | Tenure | Background / prior roles | Education / qualifications |
|---|---|---|---|---|
Steven Apedaile | Executive Chairman | Director since 16 Apr 2021; Chairman since 8 Nov 2021; Executive Chairman since July 2024 | 30+ years in accounting, including ~25 years in Hong Kong; began at KPMG HK; 18 years as Senior Audit Partner at Horwath HK; expertise in risk, strategic planning, listings, forensic accounting, M&A. Current director of Nanoveu Limited (ASX: NVU) | FCA, MAICD |
Jude ("Jay") Upton | Managing Director & CEO | Since 16 Apr 2021 (CEO pre-dated board seat per 2020–21 Stockhead coverage) | ~20 years in international automotive industry; prior ~20 years in engineering management in heavy mobile equipment and high-performance industrial/automotive engine engineering; named inventor on a Sprintex twin-screw patent (Stockhead) | Trade qualification (City and Guilds mechanical fitter) |
Li Chen | Non-Executive Director | Since 16 Apr 2021 | 7+ years from engineer to managing director in mechatronics R&D, business development and project management; leads Sprintex China operations (Stockhead) and is paid by the Suzhou subsidiary | MEng (University College London); Senior New-energy Engineer (MIIT, PRC) |
John Bell | CFO & Company Secretary | Since 17 Oct 2024 (replaced Michael van Uffelen) | 25+ years financial/operational experience; CFO for listed and unlisted technology-focused companies in Australia and internationally; advised on M&A, IPOs, RTOs, capital raisings, debt | Chartered Accountant; Chartered Tax Adviser; BCom |
Directors' Remuneration
| Name | Salary / fees | Bonus | Super | Share-based payments (performance rights) | Total | % performance-based |
|---|---|---|---|---|---|---|
S. Apedaile | 153,000 | 0 | 0 | 381,845 | 534,845 | 71.4% |
J. Upton | 240,000 | 0 | 0 | 234,114 | 474,114 | 49.4% |
L. Chen | 164,587 | 0 | 0 | 312,152 | 476,739 | 65.5% |
Total directors | 557,587 | 0 | 0 | 928,111 | 1,485,698 | — |
Board & Management Changes
| Date | Change |
|---|---|
1/8 July 2024 | Apedaile moves from Non-Executive to Executive Chairman, with remuneration geared to growth incentives |
16–17 Oct 2024 | John Bell replaces Michael van Uffelen as CFO and Company Secretary |
March 2025 | Experienced General Manager appointed to lead the Malaysian transition (name not disclosed) |
27 Nov 2025 | Class B and D director performance rights cancelled by agreement and replaced by Classes E–H |
Major Shareholders
| Holder | Stake | Basis |
|---|---|---|
China Automotive Holdings Limited (CAHL) | 98.85m shares, 19.99% (substantial holder notice 22 Apr 2024); since diluted by subsequent issues, partly offset by 6.7m July-2026 shortfall shares and underwriting. | Market Index; FY2026 AR |
Li Chen (director) | 21,200,258 shares (~2.9%) | FY2026 AR |
Steven Apedaile (director) | 12,362,529 shares (~1.7%) | FY2026 AR |
Jude Upton (director) | 5,592,288 shares (~0.8%) | FY2026 AR |
Competitive Landscape
Peer Comparison FY2026
| Company | Latest FY revenue | Revenue growth | Operating margin | R&D intensity | Notes |
|---|---|---|---|---|---|
Sprintex (FY2026, AUD) | A$3.46m | +129% | −160.7% | 28.3% | FY2026 AR |
Atlas Copco (FY2024, SEK) | ≈SEK 177bn | Low single digit (approx.) | ≈21% (approx.) | ~3% (approx.) | — |
Ingersoll Rand (FY2024, USD) | ≈US$7.2bn | ≈+5% (approx.) | ≈20% (approx.) | — | — |
Garrett Motion (FY2024, USD) | ≈US$3.5bn | ≈−11% (approx.) | ≈12% (approx.) | ≈4% (approx.) | — |



