Vertical: CNMBase Year: 2025
Market Size (2025)
$523.33M
Projected (2032)
$731.38M
CAGR (2022–2032)
5.6%
Key Players
8+
Market Overview
The global allyl resins market was valued at USD 523.33 Million in 2025 and is projected to reach USD 731.38 Million by 2032, registering a CAGR of 4.78% over 2026–2032. Between 2025 and 2032 the market is expected to add USD 208.05 Million in absolute value, building on a historic base of USD 425.58 Million in 2022, USD 459.22 Million in 2023 and USD 491.63 Million in 2024. Allyl resins are a specialised family of thermosetting polymers, led by diallyl phthalate (DAP), that are prized for dimensional stability, retention of electrical insulation properties under heat and humidity, low post-mould shrinkage and chemical resistance. These attributes make them the material of choice for high-reliability electrical connectors, switches, circuit-protection components and insulators used in aerospace, defence, telecommunications, industrial and transportation equipment, as well as for optical, laminate and coating uses.
Growth over the forecast period is underpinned by rising electronics content across industries, sustained investment in defence and aerospace platforms, grid and industrial electrification, and the steady migration of electronics manufacturing capacity across Asia Pacific. The market remains a niche, specification-driven segment of the thermoset universe: qualification cycles are long, performance standards are stringent, and the supplier base is concentrated, which together support price stability and customer loyalty but also limit the speed at which new volume can be added.
Key Findings
Resin Type: Diallyl Phthalate is the largest segment, accounting for 70.0% of the market in 2025 (USD 366.33 Million), while Others is the fastest-growing segment with a CAGR of 6.30% over 2026–2032.
Application: Electrical & Electronics is both the largest segment, with a 65.0% share in 2025 (USD 340.17 Million), and the fastest-growing segment, with a CAGR of 5.32%.
Region: North America is the leading region with USD 209.33 Million in 2025 (40.0% share), while Asia Pacific is the fastest-growing region at a CAGR of 6.40%, rising from USD 188.40 Million in 2025 to USD 292.92 Million in 2032.
Country: The U.S. is the leading country with USD 171.65 Million in 2025, while India is the fastest-growing country with a CAGR of 8.60%.
Regional shift: Asia Pacific is projected to overtake North America in market value during the forecast period, reaching USD 292.92 Million in 2032 against USD 272.80 Million for North America.
Segmentation Summary
By resin type, the market is divided into Diallyl Phthalate and Others. Diallyl Phthalate, supplied mainly as prepolymers and glass- or mineral-filled moulding compounds, grows from USD 366.33 Million in 2025 to USD 488.71 Million in 2032 at a CAGR of 4.08%. The Others segment, which covers diallyl isophthalate, allyl diglycol carbonate and other allyl ester resins, expands from USD 157.00 Million to USD 242.67 Million at a CAGR of 6.30%, gradually lifting its share of the market.
By application, Electrical & Electronics accounts for USD 340.17 Million in 2025 and is forecast to reach USD 492.88 Million in 2032 at a CAGR of 5.32%, reflecting the dominance of connectors, switches, bobbins and insulating parts. The Others application segment, comprising optical, laminate, coating, automotive and miscellaneous industrial uses, rises from USD 183.17 Million to USD 238.50 Million at a CAGR of 3.71%.
Competitive Landscape Summary
The global allyl resins market is moderately consolidated, with a small group of specialised producers accounting for the bulk of supply. OSAKA SODA Co., Ltd. is the leading merchant producer of diallyl phthalate and diallyl isophthalate monomers and prepolymers, while Sumitomo Bakelite Co., Ltd. (through its SBHPP high-performance plastics business) is the leading global supplier of DAP moulding compounds. In allyl diglycol carbonate, PPG Industries, Inc., the originator of CR-39 monomer, and Mitsui Chemicals, Inc., through its subsidiary Acomon and the RAV 7 range, are the principal suppliers. Specialist compounders including Raschig GmbH in Europe, Cosmic Plastics, Inc. in the United States, Fudow Co., Ltd. in Japan and Wah Hong Industrial Corp. in Taiwan serve regional and application-specific niches. Competition centres on qualified high-reliability grades, technical service, halogen-free and non-phthalate formulations, and security of monomer supply rather than on price.
Challenges and Opportunities
The principal challenge facing the market is substitution. High-performance thermoplastics such as liquid crystal polymer (LCP), polyphenylene sulfide (PPS) and glass-filled polyamides and polyesters offer shorter moulding cycles, recyclable runners and a broad global supply base, and they have displaced allyl compounds in many high-volume consumer and automotive connector designs. Volatility in petrochemical feedstocks such as allyl alcohol, propylene and phthalic anhydride, together with the concentrated nature of monomer production, also exposes moulders to supply and cost risk. Broader regulatory scrutiny of phthalates adds a perception challenge, even though diallyl phthalate is a reactive monomer that is chemically bound into the cured network rather than a free plasticiser.
Opportunities are anchored in applications where reliability outweighs cost. Defence modernisation programmes, commercial aircraft production, satellite and space electronics, electric-vehicle charging and power-distribution hardware, rail electrification and industrial automation all require insulating materials that hold tight tolerances over decades of service. Rapid electronics capacity additions in China, India and South-East Asia, and growing demand for allyl diglycol carbonate in ophthalmic lenses, broaden the addressable base for the Others resin category.
Future Outlook
The market is expected to follow a steady, specification-led growth path, expanding by USD 208.05 Million between 2025 and 2032. Year-on-year growth moderates gradually across the forecast horizon as the base enlarges, while the mix shifts toward Asia Pacific, which rises from a 36.0% share in 2025 to 40.0% in 2032, and toward non-DAP allyl chemistries, whose share rises from 30.0% to 33.2%. Suppliers that combine qualified high-reliability grades with regional technical service, secure monomer integration and development of halogen-free, high-temperature formulations are best placed to capture this growth.
The Allyl Resins Market market is projected to grow at a CAGR of 5.6% from 2022 to 2032.
Subscribe to Wantstats
Unlock premium reports, insights, blogs, charts and more.
View Subscription PlansSubscribe to Wantstats
Unlock premium reports, insights, blogs, charts and more.
View Subscription PlansDefinition
Allyl resins are thermosetting polymers produced from monomers that contain two or more allyl groups (CH2=CH–CH2–), most commonly esters of allyl alcohol with polybasic acids. The principal commercial monomer is diallyl phthalate (DAP), the diallyl ester of ortho-phthalic acid, followed by diallyl isophthalate (DAIP) and allyl diglycol carbonate (ADC). These monomers are partially polymerised into soluble, fusible prepolymers, which are then compounded with fillers such as glass fibre, mineral fillers or synthetic fibres, pigments and peroxide initiators. On heating, the material cures by free-radical addition polymerisation into a highly cross-linked network without the release of volatile by-products.
The cured resins are characterised by excellent dimensional stability, low moisture absorption, high surface and volume resistivity that is retained under prolonged heat and humidity, good arc and tracking resistance, low shrinkage and resistance to solvents, acids and alkalis. These properties explain their long-standing use in military and aerospace connectors, high-reliability switches and relays, and precision insulating components.
Included in scope: diallyl phthalate monomer, prepolymer and moulding compounds; other allyl resins including diallyl isophthalate, allyl diglycol carbonate and other allyl ester resins, in monomer, prepolymer, moulding-compound and impregnating-resin forms, sold to electrical and electronics and other end uses. Market value is measured at the resin and compound level in USD Million.
Excluded from scope: allyl alcohol, allyl chloride and other allyl intermediates sold for non-resin uses (for example, epichlorohydrin and glycerine production); allyl-functional crosslinking co-agents sold for rubber and polyolefin curing; finished moulded parts and lenses valued at the component level; and unrelated thermosets such as phenolic, epoxy, melamine and unsaturated polyester resins.
Scope of the Study
The study quantifies the global allyl resins market for the historic years 2022–2024, the base year 2025 and the forecast period 2026–2032. All values are presented in USD Million, and compound annual growth rates refer to the period 2026–2032. The market is analysed by the following segmentations:
By Resin Type: Diallyl Phthalate; Others
By Application: Electrical & Electronics; Others
By Region: North America; Europe; Asia Pacific; Latin America; Middle East & Africa
Within each region, the market is further analysed by country: the U.S., Canada and Mexico in North America; Germany, the U.K., France, Italy, Spain and Rest of Europe in Europe; China, India, Japan and Rest of Asia Pacific in Asia Pacific; Brazil, Argentina and Rest of Latin America in Latin America; and the UAE, Saudi Arabia, South Africa and Rest of MEA in the Middle East & Africa. Each region and country is further segmented by resin type and application.
Research Objectives
To estimate and forecast the size of the global allyl resins market in value terms (USD Million) for 2022–2032.
To analyse market size and growth by resin type, distinguishing diallyl phthalate from other allyl chemistries such as diallyl isophthalate and allyl diglycol carbonate.
To assess demand from electrical and electronics applications, including connectors, switches and insulating components, relative to other end uses.
To quantify regional and country-level demand across North America, Europe, Asia Pacific, Latin America and the Middle East & Africa, and to identify the fastest-growing geographies.
To evaluate the drivers, restraints, opportunities, trends and challenges shaping allyl resin demand, including substitution by engineering thermoplastics.
To examine the value chain, competitive forces, regulatory landscape and macro-environmental (PESTEL) factors that affect the market.
To profile the leading producers of allyl monomers, prepolymers and moulding compounds, and to track their key developments since 2022.
To provide a strategic outlook for suppliers, moulders and end users on where incremental growth will be generated through 2032.
Subscribe to Wantstats
Unlock premium reports, insights, blogs, charts and more.
View Subscription PlansSubscribe to Wantstats
Unlock premium reports, insights, blogs, charts and more.
View Subscription PlansSubscribe to Wantstats
Unlock premium reports, insights, blogs, charts and more.
View Subscription PlansOverview of the Research Process
The study follows a structured, multi-stage research process designed to produce a consistent and defensible estimate of market size and growth. The process begins with problem definition and scoping, in which the product boundaries, segmentation and geographic coverage are agreed. This is followed by extensive secondary research to build an initial understanding of the industry, its participants and its demand base, and by primary research to validate and refine the secondary findings. Market sizes are then estimated using both top-down and bottom-up approaches, reconciled through data triangulation, and projected over the forecast period using a factor-based forecasting model. Each stage includes internal quality reviews to ensure consistency across segments, regions and countries.
Stage 1 – Scoping: definition of allyl resin product types, applications and geographic coverage.
Stage 2 – Secondary research: collection of company, trade, regulatory and industry data.
Stage 3 – Primary research: interviews with supply-side and demand-side participants.
Stage 4 – Market estimation: top-down and bottom-up sizing with data triangulation.
Stage 5 – Forecasting: projection of demand to 2032 based on driver and restraint analysis.
Stage 6 – Validation and reporting: internal consistency checks and final review.
Secondary Research
Secondary research formed the foundation of the study. Sources were selected for their relevance to specialty thermosets, allyl monomers and the electrical and electronics supply chain, and included:
Industry associations: plastics, chemical and electronics industry bodies such as the Plastics Industry Association, the American Chemistry Council, Cefic (the European Chemical Industry Council), PlasticsEurope, the Japan Chemical Industry Association and IPC, for production statistics and industry outlooks.
Government and regulatory bodies: chemical registration and inventory databases (US EPA TSCA, the European Chemicals Agency, national chemical regulators), customs and trade statistics for synthetic resins and phthalic esters, and defence and aerospace procurement specifications.
Company filings: annual reports, securities filings, investor presentations, product data sheets and press releases of resin producers, compounders and connector manufacturers.
Trade journals and technical literature: plastics, composites and electronics trade publications, conference proceedings and peer-reviewed literature on thermoset moulding compounds and allyl polymer chemistry.
Paid databases: subscription trade-flow, company financial and industry-intelligence databases used to cross-check production, trade and pricing data.
Primary Research
Primary research was used to validate secondary findings, fill information gaps and capture qualitative insight on market dynamics. Interviews were conducted through telephone, video and e-mail discussions using structured and semi-structured questionnaires.
Supply-side respondents: executives, product managers, technical service specialists and sales managers at allyl monomer producers, prepolymer and moulding-compound manufacturers, and specialty distributors.
Demand-side respondents: procurement, materials engineering and design professionals at connector, switch and relay manufacturers, aerospace and defence electronics suppliers, custom moulders, optical lens producers and laminate manufacturers.
Objectives: to validate market size and segment splits, understand pricing and cost structures, gauge demand trends by application and region, assess substitution risk, and identify capacity, technology and strategic developments.
Market Size Estimation
Top-down approach: The overall thermoset moulding compound and specialty resin market was used as the starting point, and the share attributable to allyl resins was derived from consumption ratios, application mix and producer information. The global figure was then allocated to resin types, applications, regions and countries using shares established through secondary and primary research.
Bottom-up approach: Demand was built up from the consumption of allyl resins in key end products, such as electrical connectors, switches, insulating components, optical lenses and laminates, by country. Production capacities and estimated output of leading producers, together with trade data, were used to cross-check consumption-based estimates.
Data triangulation: The results of the top-down and bottom-up approaches were compared and reconciled. Where discrepancies arose, assumptions were revisited with industry participants and adjusted until the estimates converged within an acceptable tolerance. Segment, regional and country totals were then reconciled so that each segmentation sums to the overall market value for every year.
Forecasting Methodology
The forecast was developed by projecting the base-year (2025) market forward for each segment, region and country using growth rates derived from an analysis of demand drivers and restraints. Factors considered include electronics and electrical equipment production, aerospace and defence spending, industrial and grid electrification, automotive electronics content, ophthalmic lens demand, substitution by engineering thermoplastics, raw material availability and pricing, regulatory developments and macroeconomic conditions such as GDP growth and industrial output. The approach combines trend analysis of historic data with factor-weighted adjustments and expert validation, and was applied consistently across all segmentations.
Assumptions and Limitations
Market values are expressed in nominal USD at the resin and compound level; exchange-rate effects are assumed to remain within historic ranges.
No major disruption to global petrochemical supply chains, such as prolonged loss of allyl alcohol or phthalic anhydride capacity, is assumed over the forecast period.
Existing regulations governing phthalates and chemical substances are assumed to remain broadly in force, with no outright restriction of diallyl phthalate as a reactive monomer.
Defence, aerospace and electronics investment is assumed to continue in line with announced programmes and industry outlooks.
The analysis relies in part on information provided by industry participants and on published data that may be revised; company-level data for private producers is limited.
Country groupings labelled "Rest of" are residual estimates and carry a higher degree of uncertainty than individually covered countries.
Base Year
2025
Historical Period
2022 – 2024
Forecast Period
2026 – 2032
Primary Interviews
150+
Historical data (2022–2025) and forecast period (2025–2032)
Our research process spans primary interviews with industry stakeholders combined with comprehensive secondary data analysis, validated through triangulation across multiple independent sources.
Subscribe to Wantstats
Unlock premium reports, insights, blogs, charts and more.
View Subscription PlansIntroduction
The global allyl resins market is moderately consolidated. Supply of diallyl phthalate (DAP) and diallyl isophthalate (DAIP) monomers and prepolymers is concentrated in a very small number of producers, led by OSAKA SODA in Japan, which has manufactured DAP resin since 1962 and is integrated backward into allyl chloride. Moulding compounds are produced by a slightly larger group of thermoset specialists, including Sumitomo Bakelite (SBHPP), Raschig, Cosmic Plastics, Fudow and Wah Hong Industrial, which buy or produce prepolymer and formulate glass- and mineral-filled grades for connectors, bobbins, switches and other insulating parts. Allyl diglycol carbonate (ADC) for ophthalmic lenses is supplied mainly by PPG Industries, the originator of CR-39 monomer, and by Mitsui Chemicals through its Acomon subsidiary and the RAV 7 product range.
Competition is driven by product qualification and reliability rather than by price. Many DAP compound grades are qualified to ASTM D5948 and the legacy MIL-M-14 specification, and once a grade is designed into a connector or switch it tends to remain in use for the life of the programme. Suppliers therefore compete on the breadth of qualified grades, consistency, regional technical service, flame-retardant and halogen-free formulations, non-phthalate alternatives for regulated markets, and security of monomer supply. Most leading participants are diversified chemical or materials groups for which allyl resins are a small, specialised product line, and none reports allyl resin revenue separately.
Key Player Positioning
Based on product breadth, monomer integration, qualification status, geographic reach and heritage in the market, the profiled companies are positioned as leaders, challengers and niche players. The revenue figures quoted below are company-wide figures for the latest publicly reported fiscal year; US dollar equivalents are approximate.
Leaders
OSAKA SODA Co., Ltd. (Japan). Founded in 1915 as a caustic soda producer and known as DAISO Co., Ltd. until 2015, OSAKA SODA operates basic chemicals, functional chemicals, healthcare and trading businesses. It reported consolidated net sales of JPY 99,961 million (approximately USD 0.67 billion) for the fiscal year ended 31 March 2026. The company is the leading merchant supplier of allyl ester monomers and prepolymers, marketing DAISO DAP (DAP prepolymer), DAISO ISO DAP (DAIP prepolymer), DAISO DAP Monomer and DAISO DAP 100 Monomer (diallyl isophthalate for plastic lenses), together with RADPAR AD-032, a non-phthalate allyl resin for UV-curable inks and food-packaging applications. Its strategy leverages an integrated chlor-alkali to allyl chloride to allyl ester chain, while steering DAP toward electronics and electric-vehicle insulation, UV inks and phthalate-free solutions for regulated markets.
Sumitomo Bakelite Co., Ltd. (Japan). Established in 1932, Sumitomo Bakelite is a global leader in thermosetting resins and compounds, with semiconductor materials, high-performance plastics and quality-of-life product segments. Revenue for the fiscal year ended 31 March 2026 was JPY 319,867 million (approximately USD 2.13 billion). Through its SBHPP high-performance plastics business, which incorporates the former Vyncolit operations, the company supplies Sumitomo DAP and RX DAP moulding compounds in North America and Sumikon AM-series allyl compounds in Asia Pacific, including flame-retardant grades for military, aerospace and industrial connectors. Its strategy combines retention of legacy qualified DAP lines within a broad phenolic and epoxy portfolio with structural reform of North American high-performance plastics and growth investment in semiconductor encapsulants.
PPG Industries, Inc. (United States). PPG is a global coatings and specialty materials company headquartered in Pittsburgh, with net sales of USD 15,875 million in fiscal 2025. PPG developed CR-39 allyl diglycol carbonate monomer in the 1940s, the first plastic resin widely used for ophthalmic lenses, and continues to supply it through its optical products business alongside HI-GARD hard coatings and Trivex lens material. Its strategy is to protect the CR-39 brand through trademark enforcement and a licensed lens-caster programme, to sell complete lens systems that combine monomer and coatings, and, at group level, to focus on higher-margin industrial and performance coatings.
Mitsui Chemicals, Inc. (Japan). Mitsui Chemicals is a diversified chemical group with revenue of JPY 1,668,754 million (approximately USD 11.1 billion) for the fiscal year ended 31 March 2026. Its Vision Care Materials business supplies the RAV 7 range of ADC lens monomers, including blue-cut and specialty grades, produced through its wholly owned subsidiary Acomon, which it acquired in 2011 and which is based in Ravenna, Italy. Mitsui pairs RAV 7 at the 1.50 refractive index with its MR high-index thiourethane monomers, offering opticians and lens casters a full index range. Growth investment is concentrated in high-index materials, while ADC is managed as a mature, cash-generating line with continued specialty-grade development.
Challengers
Raschig GmbH (Germany). Founded in 1891 and headquartered in Ludwigshafen, Raschig is a privately held specialty chemicals and plastics company owned by the PMC Group; it does not publicly disclose revenue. Its thermoset moulding compound business offers DAP grades such as DAP 5553, 5562, 5563 and the halogen-free DAP 5567, and DAIP grades including DAIP 6501, 6502, 6551 and 6552, supplied for connectors, coil bobbins and switches, with production linked to Synres-Almoco in the Netherlands. Raschig's strategy is to serve European electrical and electronics customers with RoHS-compliant, glass-filled DAP and DAIP compounds and custom formulations.
Niche Players
Cosmic Plastics, Inc. (United States). Founded in 1960 and based in Valencia, California, Cosmic Plastics is a privately held manufacturer of thermoset compounds, including DAP, epoxies, alkyds and EMI-shielding compounds, for defence, aerospace and electronics; it does not publicly disclose revenue. Its ortho DAP and iso DAP grades are produced to ASTM D5948 and MIL-M-14 for connectors and have been used in space programmes. The company positions itself as a domestic US source of military-specification DAP and is seeking international distributors to extend its reach.
Fudow Co., Ltd. (Japan). Founded in 1935 and wholly owned by Mitsubishi Gas Chemical since 2003, Fudow produces phenolic, DAP, unsaturated polyester and xylene-resin moulding materials and moulded parts, and has made DAP moulding materials since 1962. It reported sales of JPY 8,952 million (approximately USD 60 million) for the fiscal year ended 31 March 2026. Its DAPOL DAP compounds, including D500, D2100F, D2102F, D2200F and D2500F, are used in surface-mount bobbins, thermo-switches, connectors and switches. Fudow targets electronic component and automotive customers, supported by resin supply from its parent.
Wah Hong Industrial Corp. (Taiwan). Founded in 1973 and listed on the Taipei Exchange, Wah Hong produces optical films, bulk moulding compounds and other thermosets, engineering plastics and battery materials, with revenue of TWD 7,136 million (approximately USD 0.23 billion) in fiscal 2025. Its allyl products include the halogen-free flame-retardant DAP WH-9100 and the modified non-phthalate DAP WH-9600 for LED reflector cups. The company uses DAP and other thermosets to serve optoelectronic, LED and automotive customers in Asia Pacific and is investing in expansion in Taiwan and South-East Asia.
Threat of New Entrants – Low
Proprietary monomer synthesis and prepolymer process technology create high technical barriers.
Lengthy qualification under military, aerospace and safety standards favours established suppliers.
Modest overall market size limits the return on new capacity investment.
Bargaining Power of Suppliers – Medium
Allyl alcohol and phthalic anhydride are available from multiple petrochemical producers, but allyl intermediates are less widely produced.
Feedstock prices track propylene and xylene cycles, transferring volatility to resin producers.
Integrated producers of allyl intermediates hold an advantage over non-integrated compounders.
Bargaining Power of Buyers – Medium
Large connector and lens manufacturers purchase significant volumes and can negotiate long-term contracts.
Switching costs are high once a compound is qualified in a design, limiting buyer leverage.
Price-sensitive buyers in commercial applications can credibly threaten to switch to thermoplastics.
Threat of Substitutes – High
LCP, PPS, PBT and polyamide grades offer faster cycle times and recyclable scrap for many connector designs.
Epoxy, phenolic and polyester moulding compounds compete on cost in insulating parts.
Polycarbonate and high-index thiourethane lens materials compete with ADC in ophthalmic uses.
Intensity of Competitive Rivalry – Medium
A small number of established producers compete primarily on quality, consistency and technical service rather than price.
Product differentiation through specification approvals and custom formulations moderates price competition.
Growth in Asia Pacific is attracting regional producers, gradually increasing competition in standard grades.
Threat of new entrants: Low; Proprietary technology, qualification barriers and small market size.
Bargaining power of suppliers: Medium; Feedstock volatility; limited allyl intermediate producers.
Bargaining power of buyers: Medium; High switching costs offset by buyer scale and substitute options.
Threat of substitutes: High; Engineering thermoplastics and lower-cost thermosets.
Competitive rivalry: Medium; Concentrated suppliers competing on quality and service.
Market estimates by geography (2032)
InsightAsia Pacific leads with $292.92M by 2032.
Subscribe to Wantstats
Unlock premium reports, insights, blogs, charts and more.
View Subscription Plans| REGION | 2022 | 2025 | 2032 | CAGR | SHARE |
|---|---|---|---|---|---|
| North America | $174.10M | $229.00M | $272.80M | 4.6% | 37% |
| Europe | $87.67M | $113.98M | $133.92M | 4.3% | 18% |
| Asia Pacific | $147.25M | $216.17M | $292.92M | 7.1% | 40% |
| Latin America | $8.26M | $11.95M | $15.94M | 6.8% | 2% |
| Middle East & Africa | $8.30M | $11.89M | $15.80M | 6.6% | 2% |
| Total | $425.58M | $582.99M | $731.38M | 5.6% | 100% |
Subscribe to Wantstats
Unlock premium reports, insights, blogs, charts and more.
View Subscription PlansTotal Market Size
$731.38M
| APPLICATION | REVENUE ($B) | GROWTH RATE | MARKET PENETRATION |
|---|---|---|---|
| Diallyl Phthalate | $488.71M | 4.9% | 67% |
| Others | $242.67M | 7.1% | 33% |
* Revenue projections based on 2025 estimates. Growth rates represent CAGR 2024–2030. Market penetration indicates current adoption rate within addressable market segments.
Subscribe to Wantstats
Unlock premium reports, insights, blogs, charts and more.
View Subscription PlansSee plans for professionals or small and medium businesses.
Analytical insights on Allyl Resins Market covering market dynamics, competitive landscape, and strategic outlook.
The Allyl Resins Market market is projected to reach $731.38M by 2032, growing at 5.6% CAGR. The Diallyl Phthalate segment holds the largest share.
The global allyl resins market, valued at USD 523.33 Million in 2025, is shaped by a combination of structural demand drivers in high-reliability electrical and electronic applications and countervailing pressures from material substitution, feedstock volatility and chemical regulation. This chapter evaluates these forces. The growth factor analysis in Section 4.2 rates five macro and five micro factors by their impact on the market across three forecast windows; the impact scores, on a scale of 1 to 10, are analyst assessments based on the secondary and primary research described in Chapter 3, where a higher score denotes a stronger influence on market growth in the direction indicated.
Rising Demand for High-Reliability Electrical Connectors and Components
Allyl moulding compounds, and DAP compounds in particular, have been a standard insulating material for military and aerospace circular connectors, terminal blocks, relays and switches for decades. Their value lies in a combination of properties that few materials match: dimensional stability over wide temperature ranges, very low moisture absorption, and retention of insulation resistance after prolonged exposure to heat and humidity. As electronics content rises in aircraft, satellites, radar, communications equipment, industrial controls and power distribution, the number of connectors and insulating parts per system grows accordingly. Long-standing specifications for thermoset moulding compounds, such as MIL-M-14 and ASTM D5948, list DAP grades, and once a material is qualified within a connector design it typically remains in production for the life of the platform. This specification lock-in gives the market a stable base of repeat demand, which is reflected in Electrical & Electronics accounting for 65.0% of global value in 2025 and growing at a CAGR of 5.32% through 2032.
Defence Modernisation and Aerospace Production
Defence budgets have increased materially since 2022 in response to the war in Ukraine and broader geopolitical tension. At the June 2025 summit in The Hague, NATO allies committed to raise defence and security-related spending toward 5% of GDP by 2035, and governments in Europe and Asia Pacific have announced multi-year rearmament and modernisation programmes. These programmes translate into orders for avionics, guided munitions, radar, secure communications and ground vehicle electronics, all of which rely on ruggedised connectors and insulating parts where DAP compounds are well established. In parallel, commercial aircraft manufacturers are working through large order backlogs and raising build rates, increasing demand for qualified electrical interconnect components. Because aerospace and defence buyers prioritise proven performance over price, these programmes support both volume and value for allyl resin suppliers.
Expansion of Electronics Manufacturing in Asia Pacific
Asia Pacific is the fastest-growing regional market, with a CAGR of 6.40% over 2026–2032. China remains the world's largest electronics manufacturing base, while India is scaling capacity through government programmes such as the Production Linked Incentive scheme for large-scale electronics manufacturing and the Electronics Component Manufacturing Scheme. Japan and South Korea continue to host advanced component, connector and semiconductor packaging industries, and South-East Asian economies including Vietnam, Thailand and Malaysia are attracting supply-chain diversification investment. The growth of local connector, switch and relay production in these countries, together with expanding power-distribution, rail and telecommunications infrastructure, is lifting regional consumption of allyl moulding compounds and prepolymers and shifting the centre of gravity of global demand toward Asia.
Electrification of Transport, Grids and Industry
The transition to electric vehicles, renewable power and electrified industrial processes increases the number of high-voltage and high-current interconnects in service. Electric-vehicle charging equipment, battery management systems, power converters, switchgear and rail traction systems require insulating materials with strong arc and tracking resistance and stable dielectric properties at elevated temperatures. While thermoplastics serve many of these needs, allyl compounds remain attractive for parts that must retain tight tolerances and insulation performance under continuous heat and humidity. Public investment programmes such as the US Infrastructure Investment and Jobs Act and the European Union's grid and clean-industry initiatives are sustaining spending on transmission, distribution and charging infrastructure, providing a long-term tailwind for specialised insulating materials.
Space, Satellite and Next-Generation Defence Electronics
The rapid growth of satellite constellations, launch activity and space-qualified electronics creates demand for insulating materials with low outgassing, radiation tolerance and dimensional stability. Allyl compounds with established heritage in military connectors are well positioned to be qualified for these programmes, as are next-generation radar, electronic warfare and unmanned systems platforms.
Optical and Ophthalmic Applications for Allyl Diglycol Carbonate
Allyl diglycol carbonate remains a widely used monomer for prescription spectacle lenses owing to its optical clarity, low dispersion and scratch resistance. The rising global prevalence of myopia, ageing populations and expanding access to vision correction in emerging economies support steady lens demand. This contributes to the Others resin type segment growing at a CAGR of 6.30%, faster than Diallyl Phthalate.
Localisation of Supply in Emerging Electronics Hubs
India, South-East Asia, Mexico and the Middle East are attracting new electronics, electrical equipment and defence manufacturing investment. India, the fastest-growing country market with a CAGR of 8.60%, illustrates the scale of the opportunity. Suppliers that establish local compounding, technical service and distribution partnerships in these hubs can capture new demand as local moulders qualify materials for domestic and export programmes.
Substitution by Engineering Thermoplastics and Other Thermosets
The most significant restraint is competition from high-performance thermoplastics, particularly liquid crystal polymer, polyphenylene sulfide and glass-filled polyamides and polyesters, which can be injection moulded at high speed with thin walls and fine pitches. These materials have captured much of the high-volume consumer electronics and automotive connector market. Epoxy, phenolic and unsaturated polyester moulding compounds also compete in some insulating applications at lower cost. As a result, allyl resins are increasingly confined to applications where their specific performance advantages are essential, limiting growth in price-sensitive segments.
Feedstock Volatility and a Concentrated Supply Base
Allyl resins depend on allyl alcohol and allyl chloride, derived from propylene, and on phthalic anhydride or isophthalic acid, derived from xylenes. Prices for these intermediates follow energy and petrochemical cycles, and production of DAP monomer and prepolymer is concentrated among a small number of producers, notably in Japan. Any disruption at a key plant, or a sharp rise in feedstock costs, can tighten supply and squeeze moulder margins, encouraging some customers to qualify alternative materials.
Regulatory Scrutiny of Phthalates
Several ortho-phthalate plasticisers are restricted under regulations such as the EU RoHS Directive and EU REACH, and phthalates as a class attract heightened regulatory and public attention. Although diallyl phthalate functions as a reactive monomer that is chemically bound into the cured polymer, the monomer itself carries hazard classifications and requires careful handling. The compliance burden and reputational sensitivity around the word phthalate can complicate material selection decisions, particularly for consumer-facing products.
Development of Halogen-Free and High-Temperature Grades
Customers increasingly require flame-retardant materials that meet UL 94 V-0 ratings without halogenated additives, alongside higher continuous-use temperatures for power electronics. Producers are reformulating allyl compounds with alternative flame-retardant systems and improved filler technologies to address these needs.
Supply-Chain Resilience and Near-Shoring
Disruptions experienced since 2020 have led defence and aerospace prime contractors to dual-source critical materials and favour regional supply. This trend benefits suppliers with production or compounding assets in North America and Europe and encourages long-term supply agreements.
Qualification Cycles as a Challenge and a Barrier
Qualifying a new moulding compound for military or aerospace use can take several years and involves extensive testing. This slows the adoption of new formulations and makes it difficult for new entrants to gain share, while also protecting incumbents' positions.
Sustainability and Process Efficiency
Thermosets cannot be re-melted, and sprue and runner scrap from compression and transfer moulding is difficult to recycle. Customers' sustainability objectives are encouraging moulders to optimise processes, reduce scrap and explore recycling of ground thermoset regrind as filler, and are pushing suppliers to document the environmental footprint of their products.
The allyl resins value chain extends from petrochemical feedstocks through monomer and resin production, compounding and distribution to end-use manufacturers. Value addition is greatest at the resin and compounding stages, where formulation know-how and qualification status determine pricing power.
Raw materials and inputs: Propylene-derived allyl alcohol and allyl chloride are esterified with phthalic anhydride (for DAP), isophthalic acid (for DAIP) or diethylene glycol bis(chloroformate) (for ADC). Peroxide initiators, glass fibre, mineral fillers, synthetic fibres, pigments and flame retardants are key secondary inputs.
Resin and monomer production: Monomers are synthesised and purified, then partially polymerised into soluble prepolymers. This stage is concentrated among a few specialty chemical producers with proprietary process technology.
Compounding and formulation: Prepolymers are blended with fillers, reinforcements and additives to produce moulding compounds tailored for compression, transfer or injection moulding, or formulated into impregnating resins and lens-casting monomers.
Distribution and channels: Products reach customers through direct sales to large connector and lens manufacturers, specialty chemical distributors and plastics resellers, and through custom moulders who convert compounds into parts.
End users: Connector, switch and relay manufacturers; aerospace and defence electronics suppliers; electrical equipment and power distribution firms; optical lens producers; laminate and coating manufacturers; and automotive and industrial component suppliers.
Allyl resins are subject to chemical registration, workplace safety, product-safety and performance regulations and standards. The principal frameworks by region are summarised below.
Aug 2023: Wah Hong Industrial Corp.; Expansion; Received approval to expand into the Ciaotou Science Park in Kaohsiung, with a view to electric-vehicle opportunities.
Sep 2023: PPG Industries, Inc.; Partnership; Named Flō-Optics as its exclusive partner to 3D-print HI-GARD lens coatings.
Nov 2023: OSAKA SODA Co., Ltd.; Strategic plan; Launched its Medium-Term Management Plan covering FY2023–FY2025.
2024: Cosmic Plastics, Inc.; Distribution; Began seeking international distributors to expand the global presence of its DAP and thermoset compounds.
Sep 2024: Sumitomo Bakelite Co., Ltd.; Investment; Sumitomo Chemical sold a 7.02% stake in Sumitomo Bakelite to GIC for approximately JPY 22.6 billion.
Dec 2024: PPG Industries, Inc.; Divestment; Completed the sale of its US and Canada architectural coatings business to American Industrial Partners, sharpening its focus on industrial and performance coatings.
Jan 2025: Mitsui Chemicals, Inc.; Expansion; Announced a new MR lens monomer plant at Omuta Works, with start-up planned for the first half of 2028, strengthening its vision-care materials range.
Jul 2025: Sumitomo Bakelite Co., Ltd.; Acquisition; Agreed to acquire AGC Inc.'s polycarbonate business.
Sep 2025: PPG Industries, Inc.; Product launch; Launched HI-GARD Non-Methanol hard coating for 1.5-index lenses, the CR-39 lens category.
Dec 2025: Wah Hong Industrial Corp.; Expansion; Announced capital expenditure of more than TWD 150 million on quantum-dot films, miniLED packaging materials and South-East Asia expansion.
May 2026: OSAKA SODA Co., Ltd.; Strategic plan; Announced a new Medium-Term Management Plan for FY2026–FY2030, together with share buybacks.
May 2026: Fudow Co., Ltd.; Exhibition; Showcased its thermosetting moulding materials, including DAP compounds, at the Automotive Engineering Exposition 2026 in Yokohama.
Jun 2026: Mitsui Chemicals, Inc.; Expansion; Announced a further expansion of MR lens monomer capacity at Omuta Works, with start-up planned for the first half of 2029.
Near-term growth will likely concentrate in modular bioreactor lines and closed-system media workflows that shorten validation cycles while preserving batch traceability.
Partnerships between CDMOs and instrumentation vendors should accelerate standard datasets for comparability across sites, improving forecasting models used in capacity planning.
Longer horizon, organoid and microphysiological adoption may reshape segment mix; teams that invest early in assay interoperability and cloud QC hooks are better positioned to capture upside without fragmenting their analytics stack.
Profiles of 102 companies operating in the Allyl Resins Market market, including revenue, employee count, and market positioning where available.
Showing 102 of 102 companies
DuPont de Nemours today is a focused, roughly USD 7 bn-revenue multi-industry company. It is no longer the diversified chemical conglomerate of its heritage. After a decade of portfolio surgery, the company consists of two segments: **Healthcare & Water Technologies (about 47% of FY2025 sales):** Tyvek® medical packaging and protective garments, specialty medical device components (Spectrum, Donatelle), and the FilmTec™ / Amberlite™ water purification franchise. **Diversified Industrials (about 53%):** Building envelope products (Tyvek® house wrap, Styrofoam™, Corian®) and engineered industrial technologies (Molykote®, Vespel®, Betaseal™/Betaforce™ adhesives, Cyrel® printing plates). The company earns a premium-specialty margin profile: operating EBITDA margin was 23.8% in FY2025, with guidance of about 24.5% for FY2026. Management targets 3–4% organic growth, 150–200 bps of margin expansion and 8–10% adjusted EPS CAGR through 2028, supported by a lightly levered BBB+/Baa1 balance sheet. The principal overhang is legacy PFAS liability, shared with Chemours, Corteva and Qnity under contractual arrangements. The principal opportunity is a cleaner, higher-growth healthcare/water mix and capital redeployment. --- **Company's own description (FY2025 10-K, Item 1).** DuPont describes itself as a leading provider of advanced solutions that improve everyday life across healthcare, water, construction and industrial markets. It emphasizes helping customers advance their technology pipelines, from clean water to medical packaging that enhances safety and performance. It names its competitive strengths as: - proprietary product and process technologies; - robust application-development pipelines; - well-known brands; - customer intimacy; - global manufacturing and local service capability. **Independent characterization.** DuPont is now best understood as a specialty engineered-materials and components company with four businesses of roughly comparable scale: **Business model and revenue model.** - Revenue is overwhelmingly product sales: materials, components, membranes, resins, garments and plates. Some engineered systems and modules are sold in Water. - There is no material subscription or licensing revenue. Trade secrets may be licensed occasionally (10-K, Intellectual Property). - The contract manufacturing and design services of Spectrum and Donatelle (medical devices) add a design-in / build-to-print services element, but are recognized as product revenue. - Seasonality: North American Building Technologies demand peaks in Q2–Q3. **Value-chain position.** DuPont sits mid-stream as a Tier-1/Tier-2 supplier. It converts purchased raw materials (polyolefins, specialty monomers, resins, silicones, polymers) into engineered materials, membranes and components. These are specified into customers' finished products: medical devices, sterile packaging, water plants, building envelopes, aircraft, vehicles and print packaging. **Customer types.** - Medical device OEMs and sterile packaging converters - Biopharma manufacturers - Industrial end users and EPC/OEM water-system integrators - Municipalities and desalination operators (via integrators) - Builders, contractors and distributors (e.g., Corian® distribution through Hallmark and Parksite) - Automotive and EV OEMs and Tier-1s - Aerospace OEMs - Printing and packaging converters Most products are sold through DuPont's own sales organization, with distributors used for some lines (10-K, Distribution). **End markets.** Healthcare (medical devices, packaging, biopharma, PPE), water (industrial, municipal/desalination, life sciences, microelectronics UPW), construction (residential, non-residential, repair/remodel) and industrial (aerospace, automotive/EV, printing and packaging, general industrial).
Nippon Soda is a mid-cap, diversified Japanese chemical group founded in 1920 as a chlor-alkali producer and progressively re-shaped into a portfolio anchored by two high-value franchises: research-based crop protection (Agri Business, 35% of FY3/26 sales) and specialty "Chemical Materials" (25%), complemented by lower-margin but stable trading/logistics, plant engineering and environmental-recycling businesses. Its crown jewels are niche, high-barrier products in which it holds globally relevant positions — the pharmaceutical excipient NISSO HPC (hydroxypropyl cellulose), liquid polybutadiene NISSO-PB for AI-server copper-clad laminates, KrF photoresist polymer VP-POLYMER, and proprietary agrochemicals such as Mospilan (acetamiprid) and Topsin-M. With FY3/26 net sales of JPY 152.1 billion, record net profit of JPY 18.3 billion, an equity ratio of ~66.6%, and a 50%+ total shareholder return policy, the company is a conservatively financed, R&D-led specialty player now pivoting toward healthcare (including animal health) and advanced ICT materials under its Stage III plan to FY3/30. --- ### Company's own description According to its Stage III medium-term plan (May 2026), Nippon Soda describes its mission as creating new value through the power of chemistry, and frames the group as supporting everyday life through chemical products and services across four "material" fields: Agriculture (securing food and sustainable agriculture), Healthcare (healthy life for all people), Environment (toward a resource-recycling society) and ICT (chemical functions for IT devices). The Yuho describes the parent's business as manufacturing, processing and marketing of industrial chemicals, synthetic resins and plastics, dyes, pharmaceuticals, agrochemicals, veterinary pharmaceuticals and other chemical products. ### Business model and revenue model Nippon Soda's revenue is overwhelmingly product-based (manufactured chemical sales), with secondary service revenues from logistics (warehousing, transport, customs brokerage), engineering/EPC contracts and waste treatment. There is no material subscription revenue. Licensing/active-ingredient supply is embedded in Agri Business: the company supplies proprietary active ingredients (AIs) to global majors and sells formulated products through its own overseas network and partners. The revenue mix by nature (approximation from FY3/26 segment data; company does not disclose a product/service split): *Note: the above split is an analytical characterization; the company does not report revenue by nature.* ### Value-chain position **Agri Business:** fully integrated R&D-type agrochemical originator — chemical synthesis, biological/safety research, formulation research, field evaluation, AI manufacturing (including via Nisso Namhae Agro in Korea) and formulation, registration and global marketing (Stage III plan). The company emphasizes that R&D-type agrochemical originators are largely limited to five overseas majors plus Japanese firms, and that Japanese originators punch above their weight in new AI discovery. **Chemical Materials:** upstream chlor-alkali (caustic soda, chlorine, hydrochloric acid) feeding downstream fine/specialty chemistry (living anionic polymerization for NISSO-PB and VP-POLYMER; cellulose derivatization for HPC; penem API synthesis). **Trading & Logistics:** captive and third-party distribution (Nisso Shoji) and specialized hazardous/pharma logistics (Sanwa Soko, Sanso Unyu). **Engineering:** fine-chemical-type EPC (Nisso Engineering) and civil works (Nisso Kensetsu). **Eco Solutions:** waste treatment, zinc recovery from electric-arc-furnace dust, sulfuric acid recycling (Nisso Metallochemical). ### Customer types and end-markets Customers include global agrochemical majors and distributors, farmers' cooperatives (via channels), generic and innovator pharmaceutical companies and supplement makers (HPC, SSF, faropenem API), copper-clad-laminate (CCL) and semiconductor-materials producers (NISSO-PB, 1,2-SBS, VP-POLYMER), thermal-paper manufacturers (color developers), battery-materials producers, industrial users of commodity chemicals, steelmakers (EAF dust treatment), and public/private construction clients (Engineering). End-markets: crop protection (fruit & vegetables first, expanding to grains), pharmaceuticals/nutraceuticals, semiconductors/electronics (AI servers, HBM, automotive chips), infrastructure, and environmental services. ### Independent characterization Nippon Soda is best understood as two engines and three stabilizers. The engines — Agri Business and specialty Chemical Materials — generated roughly 75% of FY3/26 segment operating profit (JPY 11.2 billion of JPY 14.97 billion before adjustments) on 60% of sales. Agri is cyclical and FX-sensitive (65.7% overseas sales ratio in FY3/26), while Chemical Materials has been structurally re-rated from a ~5–6% margin business to ~15–17% after exiting commodity lines (metallic sodium via Alkaline S.A.S., NISSO HI-CHLON, phenol-based color developers, sodium cyanide). The stabilizers (Trading & Logistics, Engineering, Eco Solutions) are low-growth and modest-margin but add scale and cash. A further, often-overlooked profit pillar is equity-method income (JPY 6.06 billion in FY3/26, chiefly Iharabras in Brazil), which made ordinary profit (JPY 22.99 billion) much larger than operating profit and is highly FX-sensitive (BRL/USD).
RPM International is a holding company for more than a dozen semi-autonomous specialty-chemicals franchises. These businesses make coatings, sealants, roofing, concrete admixtures, flooring, fireproofing and building-envelope systems, mostly for maintenance, repair and restoration rather than new construction. Its brand portfolio is unusually deep for a USD 7.9 billion company: Rust-Oleum, DAP, Zinsser, Varathane and The Pink Stuff on the consumer side; Tremco, Euclid, Dryvit, Nudura, Kalzip, Stonhard, Carboline and Fibergrate on the professional side. Each brand holds a leading position in a niche that larger diversified coatings groups do not dominate. Since 2018 RPM has run successive operational-improvement programs (MAP to Growth, MAP 2025, and now "MAP 3.0"). These have lifted gross margin from about 36% (FY2022) to about 41% (FY2026) and moved the group from a loose federation toward a centrally coordinated operating company. RPM is a disciplined, dividend-growing compounder with 52 consecutive annual dividend increases. Its growth vectors are engineered building systems, emerging markets (the "Platform" model) and bolt-on M&A. --- ### Company's own description (FY2026 Form 10-K, Item 1) RPM describes itself as follows: its subsidiaries manufacture, market and sell specialty chemical product lines, including high-quality specialty paints, infrastructure rehab and repair products, protective coatings, roofing systems, sealants and adhesives. These products focus on the maintenance and improvement needs of the construction, industrial, specialty and consumer markets. Footprint as of 31 May 2026: - Products marketed in about 167 countries and territories. - Manufacturing in about 120 locations across 22 countries. - About 31% of sales generated internationally: foreign operations 29.8% of net sales, plus direct U.S. exports of 0.9%. The press-release boilerplate calls RPM "a world leader in specialty coatings, sealants, building materials and related services." ### Business model RPM's model has four defining features. - **Decentralised entrepreneurial structure, becoming more integrated.** The founder's philosophy, still quoted in the 2026 proxy, is: "Hire the best people you can find. Create an atmosphere that will keep them. Then let them do their jobs." Operating companies historically kept their own brands, sales forces and ERP systems. The MAP programs are deliberately centralising procurement, manufacturing, accounting and IT. The stated goal is to consolidate more than 75 ERP systems to one platform per segment (Q4 FY2026 8-K). **Repair and maintenance bias:** Much of the portfolio serves existing assets: roof restoration, re-cover, concrete repair, corrosion control, rust prevention and DIY touch-up. That demand is less cyclical than new-build construction. The FY2026 10-K notes that re-roofing has historically accounted for over three-quarters of U.S. roofing demand. **Systems and turnkey selling:** In CPG and PCG, RPM increasingly sells integrated systems (the "Power of One" building envelope) and supply-and-apply turnkey services. Examples include Stonhard flooring installation and Weatherproofing Technologies roofing services. This captures more of each construction project's spend. **Bolt-on M&A plus organic growth:** RPM completed six acquisitions in each of FY2025 and FY2026 (FY2026 10-K Note F). ### Revenue model mix RPM does not disclose a product versus service versus licensing split. From filings, the mix is: ### Value-chain position RPM is a formulator and brand owner, positioned downstream of commodity chemical producers. It buys petroleum-derived resins, solvents, pigments, minerals, metals and packaging (FY2026 10-K, Raw Materials). It is selectively backward-integrated: RPM cites expanding in-house raw material production, and Arnette Polymers makes amine curing agents and epoxy intermediates. Channels downstream include: - Mass merchants and home centres, where the single largest Consumer customer was 20% of Consumer sales in FY2026. - Hardware and paint stores. - Distributors. - Contractors and specifiers. - Direct sales to industrial plant owners, public institutions and infrastructure agencies. ### Independent characterisation RPM is best understood as a portfolio of niche category leaders with a structural margin-improvement story layered on top. The professional segments (CPG and PCG) are about 66% of sales and supply the growth. In FY2026 they posted record results driven by high-performance buildings, data centres, infrastructure, fireproofing and concrete admixtures. In Q1 FY2027, emerging-market regions grew more than 20%. The Consumer segment is about 34% of sales. It is a cash-generative but volume-challenged DIY business. Organic Consumer sales fell 0.8% in Q4 FY2026 and 4.7% in Q2 FY2026. They recovered to +5.2% in Q1 FY2027 on shelf-space wins and pricing. The equity debate therefore centres on three questions: 1. Can MAP savings and pricing protect margins against renewed raw-material inflation linked to the Middle East conflict? 2. Is the Q1 FY2027 CPG slowdown temporary? 3. Will the 9 November 2026 investor day credibly frame the next margin plan?
Company Headquarters: Amsterdam, Netherlands Founded: 1994 Workforce: ~35,200 Company Working: Akzo Nobel N.V. operates its business by manufacturing products of various industries such as decorative paints, automotive & specialty coatings, industrial coatings, powder coating and marine, protective and yacht coatings. The automotive and specialty coatings segment of the business comprises products such as aerospace coatings, consumer electronics coatings, automotive OEM coatings, vehicle refinishes and sign finishes. Further, its industrial coatings segment offers products including coil and extrusion coatings, wood finishes, packaging coatings, and adhesives. The company owns more than 3,100 patents and has robust research and development capabilities which is evident from the fact that it has spent around USD 1.33 billion on research and development in last five years and possess five R&D centers. The brand portfolio offered by the company includes Dulux, Sikkens, International and Interpon and has a strong geographical presence in around 150 countries.
3 interactive charts drawn from the Allyl Resins Market dataset — market size, regional splits and each segment breakdown. Open one to read its full data table and download it.
Global Allyl Resins Market By Application
Global Allyl Resins Market By Resin Type
Global Allyl Resins Market By Region
Powering the world's best teams.
From next-gen startups to established enterprises.
Trusted by forward-thinking businesses
for data-driven intelligence
Co-Founder, Mojave Rail Fabrication Limited
This is really good guys. Excellent work on a tight deadline. I will continue to use you going forward and recommend you to others. Nice job.
Manager, JavolVision
Thanks, I am so happy that we worked together. Maybe we still can work together in the future.
Sales Operations & Pricing Manager, Intel
Thanks. It's been a pleasure working with you, please use me as reference with any other Intel employees.
Sales Leader, Bamberg
We bought your "2025 report" in 2020. Everything is fine and very good.
Account and Business Manager, EFS-Holland BV
Thanks for sending the report it gives us a good global view of the Betaïne market.
Senior Retail Manager, LG Chem
We found the report very insightful! we found your research firm very helpful. I'm sending this email to secure our future business.
Management Consultant, Level 21
I am very pleased with how market segments have been defined in a relevant way for my purposes (such as "Portable Freezers & refrigerators" and "last-mile"). In general the report is well structured. Thanks very much for your efforts.
Group Product Manager HVAC & Fire Protection GMA, Rockwool
I have been reading the first document or the study, the Global HVAC and FP market report 2021 till 2026. Must say, good info! I have not gone in depth at all parts, but got a good indication of the data inside!
R&D Director, Seojin
Thanks for your great support. Appreciate it. Well received report. It helps us to understand market well. We're planning other area of survey in the future, let's keep in touch.
Strategy & Business Development Director, Dogan Holding
We got the report in time, we really thank you for your support in this process. I also thank to all of your team as they did a great job.
Historical performance and future projections (2020–2030, USD Billion)
Market Size (USD Million)
