Huntsman is a mid-cap, globally diversified manufacturer of differentiated chemicals, organised around three segments. The largest is Polyurethanes, built on MDI (methylene diphenyl diisocyanate) and downstream systems, which accounts for roughly 65% of segment revenue. The other two are Performance Products, covering amines, maleic anhydride and catalysts, and Advanced Materials, covering epoxy, acrylic and polyurethane-based adhesives, composites and formulations for aerospace, power and industrial markets. Management's thesis since 2018 has been to move away from commodities and towards downstream, formulated and specified products tied to energy efficiency and lightweighting. Management has said these themes touch about two-thirds of sales. That repositioning was executed through divestitures (Venator, Chemical Intermediates & Surfactants, Textile Effects) and bolt-on acquisitions. It was then overwhelmed by a severe and prolonged chemical down-cycle. Adjusted EBITDA fell from USD 1.34 billion in FY2021 to USD 275 million in FY2025, the dividend was cut 65%, and the credit rating fell to sub-investment grade. The company's answer is an all-stock merger of equals with upstream chlor-alkali/epoxy producer Olin, which creates the vertically integrated "OlinHuntsman".
---
### Company self-description
In its FY2025 earnings release (Feb 2026), Huntsman describes itself as a publicly traded global manufacturer and marketer of differentiated and specialty chemicals. It reported roughly USD 6 billion of 2025 revenue from continuing operations and sells thousands of chemical products worldwide to manufacturers serving consumer and industrial end markets [V]. The 10-K for FY2025 (filed February 2026) frames the business across three reportable segments: Polyurethanes, Performance Products and Advanced Materials.
### Independent characterisation
Huntsman is best understood as a mid-stream to downstream chemical converter with one large semi-commoditised profit pool (MDI) and two smaller specialty franchises. The three businesses have different economics:
- **Polyurethanes (≈65% of FY2025 segment revenue)** is a scale business anchored by MDI production at Geismar (Louisiana, USA), Rotterdam (Netherlands) and Caojing (Shanghai, China, through joint ventures). Huntsman's strategy is to push as much MDI as possible into "differentiated" downstream systems: spray-foam insulation (Huntsman Building Solutions), automotive foams and composites, TPU elastomers, and footwear and furniture systems. These systems carry better and stickier margins than component MDI. Even so, segment profitability tracks the global MDI supply/demand balance. That balance has been structurally weakened by Chinese capacity additions, led by Wanhua.
- **Performance Products (≈17%)** makes amines (ethyleneamines, polyetheramines sold as JEFFAMINE), catalysts, carbonates and maleic anhydride. It is US-centred, with key sites on the Texas/Louisiana Gulf Coast plus Petfurdo in Hungary. Its end markets are coatings, composites, fuels and lubricants, agriculture, construction and electronics. The European maleic anhydride plant at Moers (Germany) was closed in 2025.
- **Advanced Materials (≈18%)** is the highest-quality franchise. It includes the ARALDITE adhesives and epoxy systems heritage, inherited from Ciba via Vantico, and serves aerospace, power transmission and distribution, automotive, electronics and industrial markets. It has consistently delivered segment adjusted EBITDA margins of about 16–20% and is the most resilient segment through the cycle.
### Value-chain position
Upstream, Huntsman buys benzene, nitric acid/aniline inputs, chlorine/caustic, propylene oxide/polyols feedstocks, ethylene oxide/ethylene, natural gas and n-butane for maleic. It is not integrated into chlorine or epoxy building blocks (epichlorohydrin, bisphenol-A liquid epoxy resin). This gap is the core industrial logic of the Olin merger, since Olin is a leading chlor-alkali and epoxy producer. Downstream, Huntsman sells to formulators, OEMs and contractors.
### Customer types and end markets
- **Customers:** OEMs (automotive, aerospace, appliance, electrical equipment), formulators (coatings, adhesives, composites), construction product makers (insulation boards, spray-foam contractors, OSB/engineered wood), and industrial processors (footwear, furniture, lubricants, fuel additives).
- **End markets (management characterisation):** construction and insulation (the largest exposure), automotive and transportation, aerospace, power/electrical, industrial, consumer (footwear, furniture, bedding), energy (fuels and lubricants), and electronics.
- **Structural theme:** Management states that energy efficiency and lightweighting affect about two-thirds of total sales (FY2023 Q4 release, Feb 2024) [V].
