Ebara Corporation Overview
EBARA is a 114-year-old Japanese rotating-machinery and fluid-engineering group that has become one of the semiconductor industry's most important non-lithography equipment suppliers. Its Precision Machinery (Precision & Electronics) business supplies chemical mechanical polishing (CMP) systems, dry vacuum pumps, exhaust-gas abatement units, plating systems and precision chillers to leading-edge logic, foundry and memory fabs. In FY2025 this business produced 36% of revenue and about half of segment profit. Around it sit four cash-generative industrial franchises: Building Service & Industrial (standard pumps, chillers, cooling towers), Energy (Ebara Elliott Energy's compressors, steam turbines, cryogenic and custom pumps), Infrastructure (public water and drainage pumps) and Environmental Solutions (municipal waste-to-energy plants with long O&M contracts). Group revenue reached ¥958.3 billion in FY2025, a fifth straight record. Management targets about ¥1.2 trillion by FY2028 and more than ¥2 trillion by FY2035, using AI-driven fab spending, LNG, hydrogen and data-centre demand, and the cross-segment strength of its pump, compressor and vacuum technology.
What the company does
| Segment (English / Japanese) | Market faced | Core offering |
|---|---|---|
| Building Service & Industrial (建築・産業) | Commercial and residential buildings, data centres, general industry, machine tools, fire protection, agriculture | Standard pumps (land-based, submersible, water supply), refrigeration machinery, cooling towers, blowers and fans |
| Energy (エネルギー) | Oil and gas, LNG, refining, petrochemicals, power, hydrogen and ammonia | Custom pumps, compressors and steam turbines, cryogenic pumps and expanders (mainly through Ebara Elliott Energy) |
| Infrastructure (インフラ) | Public water supply, sewerage, flood drainage, irrigation, road tunnels | Large custom pumps for water infrastructure, tunnel ventilation fans, maintenance and inspection |
| Environmental Solutions (環境) | Municipalities and industrial waste generators | Municipal and industrial solid-waste incineration plants, EPC, long-term operation and maintenance |
| Precision Machinery / Precision & Electronics (精密・電子) | Semiconductor device makers (logic, foundry, memory), advanced packaging | Dry vacuum pumps, CMP systems, plating systems, exhaust-gas abatement systems, chillers, and associated service and support |
EBARA designs, manufactures, installs and services machinery that moves, compresses, cools or treats fluids and gases, and builds and operates plants that process solid waste. Its core technical competence lies in rotating machinery (pumps, compressors, blowers, turbines and vacuum pumps), fluid dynamics, thermal engineering and precision surface processing. Since 1987 EBARA has also applied these competences to semiconductor fabrication. Vacuum and exhaust treatment came first; CMP and electroplating systems followed.
The company organizes itself into five market-facing in-house companies, each a reportable segment:
Building Service & Industrial (建築・産業): Market faced: Commercial and residential buildings, data centres, general industry, machine tools, fire protection, agriculture; Core offering: Standard pumps (land-based, submersible, water supply), refrigeration machinery, cooling towers, blowers and fans
Energy (エネルギー): Market faced: Oil and gas, LNG, refining, petrochemicals, power, hydrogen and ammonia; Core offering: Custom pumps, compressors and steam turbines, cryogenic pumps and expanders (mainly through Ebara Elliott Energy)
Infrastructure (インフラ): Market faced: Public water supply, sewerage, flood drainage, irrigation, road tunnels; Core offering: Large custom pumps for water infrastructure, tunnel ventilation fans, maintenance and inspection
Environmental Solutions (環境): Market faced: Municipalities and industrial waste generators; Core offering: Municipal and industrial solid-waste incineration plants, EPC, long-term operation and maintenance
Precision Machinery / Precision & Electronics (精密・電子): Market faced: Semiconductor device makers (logic, foundry, memory), advanced packaging; Core offering: Dry vacuum pumps, CMP systems, plating systems, exhaust-gas abatement systems, chillers, and associated service and support
The company's own description
In its FY2025 annual securities report, EBARA describes the group as conducting manufacturing, sales, construction, maintenance and services across five business fields, centred on the parent company. The report lists standard pumps, refrigeration machinery and blowers for Building Service & Industrial; custom pumps, compressors, turbines, cryogenic pumps and expanders for Energy; custom pumps for agriculture, drainage, water and sewage, plus tunnel ventilators, for Infrastructure; waste incineration plants and related engineering and operation for Environmental Solutions; and vacuum pumps, CMP equipment, plating equipment and exhaust-gas treatment equipment for Precision & Electronics. Under its long-term vision E-Vision 2035, the group describes itself as aiming to be "an excellent global company essential to building a sustainable society", with the slogan "Essential EBARA. Everywhere."
Independent characterization
EBARA is best understood as two companies under one roof:
-
A semiconductor capital-equipment and consumable-service business. It is high-growth, high-return (FY2025 segment ROIC 21.0%, margin 16.9%) and cyclical, and it is exposed to leading-edge logic and memory capex in Taiwan, Korea, Japan, China and the United States. Order intake in this business nearly doubled in the first half of 2026 on AI-related demand.
-
A diversified industrial-machinery and infrastructure business. It is mid-margin (6–13%), service-heavy and less cyclical, and it generates the cash flow and engineering depth that fund the semiconductor franchise. In Energy, Environmental Solutions and Infrastructure, half or more of revenue comes from after-market service, O&M and support.
The two are linked by shared rotating-machinery technology. The vacuum pumps in a fab and the cryogenic LNG and liquid-hydrogen pumps in Energy draw on the same design and manufacturing base, and the group explicitly manages cross-segment technology synergies.
Business model and revenue model
| Revenue type | Description | Indicative weight |
|---|---|---|
| Product / equipment sales | New equipment: CMP tools, vacuum pumps, standard pumps, chillers, compressors and turbines, custom pumps | About 60% of group revenue |
| Service & Support (S&S) / O&M | Spare parts, overhaul (notably dry-pump overhaul), retrofits, field service, long-term plant O&M contracts | 37.9% of FY2024 revenue (¥328.5 billion of ¥866.7 billion); 39.0% of 1H FY2026 revenue (¥191.3 billion of ¥490.7 billion) |
| EPC / project revenue | Waste-to-energy plants, large pump stations, integrated compressor/turbine trains, recognized over time | Concentrated in Environmental Solutions, Energy and Infrastructure |
| Subscription / licensing | Not a material revenue line | Not publicly disclosed as a separate line |
| S&S share of segment revenue (%) | FY2023 | FY2024 |
|---|---|---|
| Building Service & Industrial | 23 | 23 |
| Energy | 58 | 48 |
| Infrastructure | 49 | 48 |
| Environmental Solutions (O&M) | 80 | 73 |
| Precision Machinery | 29 | 31 |
Product / equipment sales: Description: New equipment: CMP tools, vacuum pumps, standard pumps, chillers, compressors and turbines, custom pumps; Indicative weight: About 60% of group revenue
Service & Support (S&S) / O&M: Description: Spare parts, overhaul (notably dry-pump overhaul), retrofits, field service, long-term plant O&M contracts; Indicative weight: 37.9% of FY2024 revenue (¥328.5 billion of ¥866.7 billion); 39.0% of 1H FY2026 revenue (¥191.3 billion of ¥490.7 billion)
EPC / project revenue: Description: Waste-to-energy plants, large pump stations, integrated compressor/turbine trains, recognized over time; Indicative weight: Concentrated in Environmental Solutions, Energy and Infrastructure
Subscription / licensing: Description: Not a material revenue line; Indicative weight: Not publicly disclosed as a separate line
S&S share of segment revenue, which gives a rough measure of revenue resilience:
Building Service & Industrial: FY2023: 23; FY2024: 23
Energy: FY2023: 58; FY2024: 48
Infrastructure: FY2023: 49; FY2024: 48
Environmental Solutions (O&M): FY2023: 80; FY2024: 73
Precision Machinery: FY2023: 29; FY2024: 31
In 1H FY2026, S&S share was 29% in Precision Machinery, 55% in Energy, 22% in Building Service & Industrial, 53% in Infrastructure and 82% (O&M) in Environmental Solutions.
Value-chain position
Semiconductors: a Tier-1 equipment supplier selling direct to device makers (IDMs, foundries, memory makers) and to fab-facility contractors. CMP sits in the front-end process flow. Vacuum pumps, abatement units and chillers are sub-fab equipment installed under every process tool, which ties EBARA's installed base, and therefore its overhaul revenue, to the number of process chambers in operation.
Energy: an OEM of critical rotating equipment for EPC contractors and owner-operators in LNG, ethylene, refining, power and hydrogen, with a global service network (29 service and sales centres for Ebara Elliott Energy).
Buildings and industry: a component OEM selling through distributors, contractors and OEM channels.
Public infrastructure and environment: a prime contractor or major subcontractor to Japanese municipalities and national agencies, often under design-build-operate structures.
Customer types and end-markets
| End-market | Customer types | Principal segment |
|---|---|---|
| Semiconductor fabrication (logic, foundry, DRAM/HBM, NAND), advanced packaging | Chip makers, fab contractors | Precision Machinery |
| Oil and gas, LNG, petrochemicals, refining | Owner-operators, EPC contractors | Energy |
| Power generation, nuclear process heat, hydrogen supply chain | Utilities, energy companies, shipbuilders (LH2 carriers) | Energy |
| Commercial buildings, data centres, residential | Contractors, building owners, distributors | Building Service & Industrial |
| General industry, machine tools, fire protection, agriculture | OEMs, distributors | Building Service & Industrial |
| Water supply, sewerage, flood control, road tunnels | National and local governments | Infrastructure |
| Municipal and industrial waste | Municipalities, industrial waste processors | Environmental Solutions |
- Semiconductor fabrication (logic, foundry, DRAM/HBM, NAND), advanced packaging — Customer types: Chip makers, fab contractors; Principal segment: Precision Machinery
Oil and gas, LNG, petrochemicals, refining: Customer types: Owner-operators, EPC contractors; Principal segment: Energy
- Power generation, nuclear process heat, hydrogen supply chain — Customer types: Utilities, energy companies, shipbuilders (LH2 carriers); Principal segment: Energy
Commercial buildings, data centres, residential: Customer types: Contractors, building owners, distributors; Principal segment: Building Service & Industrial
- General industry, machine tools, fire protection, agriculture — Customer types: OEMs, distributors; Principal segment: Building Service & Industrial
Water supply, sewerage, flood control, road tunnels: Customer types: National and local governments; Principal segment: Infrastructure
Municipal and industrial waste: Customer types: Municipalities, industrial waste processors; Principal segment: Environmental Solutions
Strategy
E-Plan 2025 outcome (FY2023–FY2025)
| E-Plan 2025 metric | Target | FY2025 actual |
|---|---|---|
| Revenue CAGR (FY2022–FY2025, %) | 7.0 or higher | 12.1 |
| Operating margin (%) | 10.0 or higher | 11.9 |
| ROE (%) | 15.0 or higher | 15.6 |
| ROIC (%) | 10.0 or higher | 11.9 |
| Environmental Solutions operating margin (%) | 7.0 or higher | 13.3 |
| Precision Machinery operating margin (%) | 17.0 or higher | 16.9 |
| Building Service & Industrial operating margin (%) | 7.0 or higher | 6.3 |
Revenue CAGR (FY2022–FY2025, %): Target: 7.0 or higher; FY2025 actual: 12.1
Operating margin (%): Target: 10.0 or higher; FY2025 actual: 11.9
ROE (%): Target: 15.0 or higher; FY2025 actual: 15.6
ROIC (%): Target: 10.0 or higher; FY2025 actual: 11.9
Environmental Solutions operating margin (%): Target: 7.0 or higher; FY2025 actual: 13.3
Precision Machinery operating margin (%): Target: 17.0 or higher; FY2025 actual: 16.9
Building Service & Industrial operating margin (%): Target: 7.0 or higher; FY2025 actual: 6.3
EBARA met or beat every consolidated target, five years after a period in which, in the words of the company's own reflection on Asami's appointment, profitability was low and three consecutive medium-term plans had missed their quantitative targets. Over the three years the group spent ¥61.9 billion on R&D and ¥174.8 billion on growth investment, plus ¥81.8 billion on infrastructure investment.
E-Vision 2035 (long-term vision, announced 13 February 2026)
Aspiration: "An excellent global company essential to building a sustainable society", under the slogan "Essential EBARA. Everywhere."
Value themes: decarbonization, safe and secure living, and support for advanced industry. The group aims to maximize economic value while creating social and environmental value through flow technology and rotating machinery.
FY2035 targets: revenue above ¥2 trillion, ROIC above 20% and ROE above 25%.
Portfolio logic: "Global Business Segments" (Precision Machinery, Energy, Building Service & Industrial) target high-growth global markets, while "Japan-Based Business Segments" (Infrastructure, Environmental Solutions) serve domestic public infrastructure.
E-Plan 2028 (FY2026–FY2028)
| Consolidated financial targets | FY2025 actual | FY2028 target |
|---|---|---|
| Revenue (JPY bn) | 958.2 | 1,200 |
| Operating margin (%) | 11.9 | 14.5 |
| ROIC (%) | 11.9 | 13.0 |
| ROE (%) | 15.6 | 18.0 |
| Debt-to-equity ratio (x) | 0.44 | 0.45 |
| Segment targets | Revenue CAGR FY2022–25 actual (%) | Revenue CAGR FY2025–28 target (%) | OP margin FY2025 (%) | OP margin FY2028 target (%) | ROIC FY2025 (%) | ROIC FY2028 target (%) |
|---|---|---|---|---|---|---|
| Precision Machinery | 15.5 | 15.0 or higher | 16.9 | 20.0 or higher | 21.0 | 25.0 or higher |
| Energy | 14.9 | 8.0 or higher | 11.9 | 14.5 or higher | 12.2 | 15.0 or higher |
| Building Service & Industrial | 7.7 | 8.0 or higher | 6.3 | 9.0 or higher | 5.5 | 8.5 or higher |
| Infrastructure | — | — | 8.2 | 9.0 or higher | 10.3 | 12.5 or higher |
| Environmental Solutions | — | — | 13.3 | 8.5 or higher | 19.1 | 13.0 or higher |
| Material issue | KPI | Target |
|---|---|---|
| M1. Contribute to a sustainable society | CSR procurement compliance rate among key suppliers | 75% |
| M1. Contribute to a sustainable society | GHG reductions enabled by products and services | 65 million t-CO2 cumulative (2023–2028) |
| M3. Comprehensive environmental management | CDP climate score | Maintain Leadership level (A or A-) |
| M3. Comprehensive environmental management | Scope 1+2 GHG emissions | 46% reduction versus 2018 |
| M3. Comprehensive environmental management | Scope 1+2 emissions intensity per revenue (major businesses) | 66% reduction versus 2018 |
| M4. Working environments that encourage challenge | Global engagement survey score | 85 |
| M4. Working environments that encourage challenge | Women in global key positions | 11% |
| M4. Working environments that encourage challenge | Fatalities and serious incidents | 0 |
| M5. Corporate governance | Board effectiveness evaluations, support for independent directors, stakeholder dialogue | Ongoing |
Theme: realizing sustainable value creation through group-wide optimization, so that the operating foundation catches up with rapid business expansion.
Revenue (JPY bn): FY2025 actual: 958.2; FY2028 target: 1200
Operating margin (%): FY2025 actual: 11.9; FY2028 target: 14.5
ROIC (%): FY2025 actual: 11.9; FY2028 target: 13.0
ROE (%): FY2025 actual: 15.6; FY2028 target: 18.0
Debt-to-equity ratio (x): FY2025 actual: 0.44; FY2028 target: 0.45
The revenue target is about ¥1.2 trillion. The margin, ROIC and ROE figures are floors ("or higher"). The D/E target is the midpoint of the 0.4–0.5 guideline. The plan assumes a consolidated WACC of 8.0–9.0%.
Precision Machinery: Revenue CAGR FY2022–25 actual (%): 15.5; Revenue CAGR FY2025–28 target (%): 15.0 or higher; OP margin FY2025 (%): 16.9; OP margin FY2028 target (%): 20.0 or higher; ROIC FY2025 (%): 21.0; ROIC FY2028 target (%): 25.0 or higher
Energy: Revenue CAGR FY2022–25 actual (%): 14.9; Revenue CAGR FY2025–28 target (%): 8.0 or higher; OP margin FY2025 (%): 11.9; OP margin FY2028 target (%): 14.5 or higher; ROIC FY2025 (%): 12.2; ROIC FY2028 target (%): 15.0 or higher
Building Service & Industrial: Revenue CAGR FY2022–25 actual (%): 7.7; Revenue CAGR FY2025–28 target (%): 8.0 or higher; OP margin FY2025 (%): 6.3; OP margin FY2028 target (%): 9.0 or higher; ROIC FY2025 (%): 5.5; ROIC FY2028 target (%): 8.5 or higher
Infrastructure: Revenue CAGR FY2022–25 actual (%): —; Revenue CAGR FY2025–28 target (%): —; OP margin FY2025 (%): 8.2; OP margin FY2028 target (%): 9.0 or higher; ROIC FY2025 (%): 10.3; ROIC FY2028 target (%): 12.5 or higher
Environmental Solutions: Revenue CAGR FY2022–25 actual (%): —; Revenue CAGR FY2025–28 target (%): —; OP margin FY2025 (%): 13.3; OP margin FY2028 target (%): 8.5 or higher; ROIC FY2025 (%): 19.1; ROIC FY2028 target (%): 13.0 or higher
The Environmental Solutions targets sit below FY2025 actuals. Management treats FY2025's 13.3% margin as elevated by project timing and plans for normalization.
Capital allocation (FY2026–FY2028):
Growth investment: ¥260 billion, covering capacity, R&D, M&A and new bases.
Infrastructure investment: ¥60 billion, covering IT/ERP and facility renewal.
- Both amounts exceed the levels of the previous plan.
Shareholder returns: a consolidated dividend payout ratio of at least 35% as the baseline, with share buybacks considered to keep equity at an appropriate level and reach the FY2028 ROE target.
Non-financial targets (FY2028):
M1. Contribute to a sustainable society: KPI: CSR procurement compliance rate among key suppliers; Target: 75%
M1. Contribute to a sustainable society: KPI: GHG reductions enabled by products and services; Target: 65 million t-CO2 cumulative (2023–2028)
M3. Comprehensive environmental management: KPI: CDP climate score; Target: Maintain Leadership level (A or A-)
M3. Comprehensive environmental management: KPI: Scope 1+2 GHG emissions; Target: 46% reduction versus 2018
M3. Comprehensive environmental management: KPI: Scope 1+2 emissions intensity per revenue (major businesses); Target: 66% reduction versus 2018
M4. Working environments that encourage challenge: KPI: Global engagement survey score; Target: 85
M4. Working environments that encourage challenge: KPI: Women in global key positions; Target: 11%
M4. Working environments that encourage challenge: KPI: Fatalities and serious incidents; Target: 0
M5. Corporate governance: KPI: Board effectiveness evaluations, support for independent directors, stakeholder dialogue; Target: Ongoing
Strategic initiatives in the last 24 months
| Initiative | Date | Scope and intent |
|---|---|---|
| Kumamoto K3 plant | Completed December 2024 | Raised Precision Machinery capacity about 1.5x; management says ongoing line additions at Kumamoto can cover demand through 2028, with further investment under constant review |
| Liquid-hydrogen hub (E-HYETEC / E-HYEFAB) | Construction from January 2024; opened 27 October 2026 | Commercial-scale LH2 pump testing at -253°C combined with cryogenic equipment manufacturing; supports hydrogen revenue targets of ¥30 billion (2030) and ¥200 billion (2040) |
| Ebara Elliott Energy service expansion | 2025–2026 | New Abu Dhabi S&S centre (KEZAD), expanded Houston hub, Jeannette plant modernization and automation |
| Dry-pump overhaul expansion | 2,026 | New overhaul sites in Taiwan and Korea to serve the fast-growing installed base |
| Building Service & Industrial globalization through M&A | 2023–2026 | Spandau Pumpen (2023), Asanvil (2024), Germek (2026), Mitsubishi Electric motors (2026): shifting from stand-alone pumps to packaged pump units and motor-integrated, energy-saving and predictive-maintenance solutions |
| Cryogenic chiller entry | 2,026 | Entry into the -60°C etch-chiller market with an energy-efficient design |
| Advanced-packaging tools | 2,026 | Panel-level packaging CMP and plating equipment developed |
| NuScale partnership | March 2026 | Nuclear-steam compressor for petrochemical process heat; compressor completion targeted in 2027 |
| Digital transformation | 2024–2026 | Group ERP rollout (including the SAP-based "ReBORN" programme in Building Service & Industrial), the EBARA-D3 manufacturing DX platform, AI knowledge capture, and a generative-AI platform on Google Cloud |
| Portfolio pruning | April–July 2026 | Sale of the 33.33% Swing Corporation stake to INFRONEER Holdings, releasing capital from a non-core equity-method holding |
| Capital efficiency | August 2025 – August 2026 | ¥20 billion and ¥10 billion share buybacks completed; treasury share cancellation announced February 2026 |
| Sustainability-linked finance | September 2024; 2025 | ¥10 billion 10-year sustainability-linked bond, with a further issue in 2025 under the same framework |
Kumamoto K3 plant: Date: Completed December 2024; Scope and intent: Raised Precision Machinery capacity about 1.5x; management says ongoing line additions at Kumamoto can cover demand through 2028, with further investment under constant review
Liquid-hydrogen hub (E-HYETEC / E-HYEFAB): Date: Construction from January 2024; opened 27 October 2026; Scope and intent: Commercial-scale LH2 pump testing at -253°C combined with cryogenic equipment manufacturing; supports hydrogen revenue targets of ¥30 billion (2030) and ¥200 billion (2040)
Ebara Elliott Energy service expansion: Date: 2025–2026; Scope and intent: New Abu Dhabi S&S centre (KEZAD), expanded Houston hub, Jeannette plant modernization and automation
Dry-pump overhaul expansion: Date: 2026; Scope and intent: New overhaul sites in Taiwan and Korea to serve the fast-growing installed base
Building Service & Industrial globalization through M&A: Date: 2023–2026; Scope and intent: Spandau Pumpen (2023), Asanvil (2024), Germek (2026), Mitsubishi Electric motors (2026): shifting from stand-alone pumps to packaged pump units and motor-integrated, energy-saving and predictive-maintenance solutions
Cryogenic chiller entry: Date: 2026; Scope and intent: Entry into the -60°C etch-chiller market with an energy-efficient design
Advanced-packaging tools: Date: 2026; Scope and intent: Panel-level packaging CMP and plating equipment developed
NuScale partnership: Date: March 2026; Scope and intent: Nuclear-steam compressor for petrochemical process heat; compressor completion targeted in 2027
Digital transformation: Date: 2024–2026; Scope and intent: Group ERP rollout (including the SAP-based "ReBORN" programme in Building Service & Industrial), the EBARA-D3 manufacturing DX platform, AI knowledge capture, and a generative-AI platform on Google Cloud
Portfolio pruning: Date: April–July 2026; Scope and intent: Sale of the 33.33% Swing Corporation stake to INFRONEER Holdings, releasing capital from a non-core equity-method holding
Capital efficiency: Date: August 2025 – August 2026; Scope and intent: ¥20 billion and ¥10 billion share buybacks completed; treasury share cancellation announced February 2026
Sustainability-linked finance: Date: September 2024; 2025; Scope and intent: ¥10 billion 10-year sustainability-linked bond, with a further issue in 2025 under the same framework
Management guidance (FY2026, revised 14 August 2026)
| FY2026 guidance | FY2025 actual | Plan of 15 May 2026 | Plan of 14 August 2026 |
|---|---|---|---|
| Orders (JPY bn) | 949.6 | 1,070.0 | 1,245.0 |
| Revenue (JPY bn) | 958.2 | 1,020.0 | 1,053.0 |
| Operating profit (JPY bn) | 113.8 | 125.0 | 125.0 |
| Operating margin (%) | 11.9 | 12.3 | 11.9 |
| Profit attributable to owners (JPY bn) | 76.6 | 99.5 | 99.5 |
| Basic EPS (JPY) | 166.31 | 217.91 | 217.93 |
| Dividend per share (JPY) | 59.0 | 66.0 | 66.0 |
| FY2026 segment guidance (14 August 2026) | Orders (JPY Bn) | Revenue (JPY Bn) | Operating profit (JPY Bn) | OP margin (%) |
|---|---|---|---|---|
| Precision Machinery | 550.0 | 425.0 | 77.0 | 18.1 |
| Building Service & Industrial | 280.0 | 265.0 | 19.0 | 7.2 |
| Energy | 220.0 | 205.0 | 18.0 | 8.8 |
| Environmental Solutions | 135.0 | 98.0 | 13.0 | 13.3 |
| Infrastructure | 60.0 | 60.0 | 5.5 | 9.2 |
| Other and adjustments | 0 | 0 | -7.5 | 0 |
Orders (JPY bn): FY2025 actual: 949.6; Plan of 15 May 2026: 1070.0; Plan of 14 August 2026: 1245.0
Revenue (JPY bn): FY2025 actual: 958.2; Plan of 15 May 2026: 1020.0; Plan of 14 August 2026: 1053.0
Operating profit (JPY bn): FY2025 actual: 113.8; Plan of 15 May 2026: 125.0; Plan of 14 August 2026: 125.0
Operating margin (%): FY2025 actual: 11.9; Plan of 15 May 2026: 12.3; Plan of 14 August 2026: 11.9
Profit attributable to owners (JPY bn): FY2025 actual: 76.6; Plan of 15 May 2026: 99.5; Plan of 14 August 2026: 99.5
Basic EPS (JPY): FY2025 actual: 166.31; Plan of 15 May 2026: 217.91; Plan of 14 August 2026: 217.93
Dividend per share (JPY): FY2025 actual: 59.0; Plan of 15 May 2026: 66.0; Plan of 14 August 2026: 66.0
The original February 2026 plan called for profit attributable to owners of ¥86.6 billion. The May revision added the ¥17.2 billion gain on the Swing Corporation stake.
Precision Machinery: Orders (JPY bn): 550.0; Revenue (JPY bn): 425.0; Operating profit (JPY bn): 77.0; OP margin (%): 18.1
Building Service & Industrial: Orders (JPY bn): 280.0; Revenue (JPY bn): 265.0; Operating profit (JPY bn): 19.0; OP margin (%): 7.2
Energy: Orders (JPY bn): 220.0; Revenue (JPY bn): 205.0; Operating profit (JPY bn): 18.0; OP margin (%): 8.8
Environmental Solutions: Orders (JPY bn): 135.0; Revenue (JPY bn): 98.0; Operating profit (JPY bn): 13.0; OP margin (%): 13.3
Infrastructure: Orders (JPY bn): 60.0; Revenue (JPY bn): 60.0; Operating profit (JPY bn): 5.5; OP margin (%): 9.2
Other and adjustments: Orders (JPY bn): 0; Revenue (JPY bn): 0; Operating profit (JPY bn): -7.5; OP margin (%): 0
Forecast FX assumptions are ¥145/USD and ¥175/EUR, more conservative than first-half actuals. The Middle East situation is assumed to persist through December 2026, with an expected direct operating-profit impact of ¥2.3 billion.
Products & Services
Precision Machinery
| Product line | Description and capabilities | Target customer | Latest version / year | Pricing model |
|---|---|---|---|---|
| CMP systems (F-REX series) | Chemical mechanical planarization tools for 300mm front-end processing (interconnect, front-end-of-line, advanced logic and memory layers); the main driver of the 2026 order surge | Logic, foundry and memory fabs | Continuous node-by-node upgrades | Capital sale plus parts and service |
| Panel-level packaging (PLP) CMP and plating | CMP and plating equipment developed for large-format panel substrates in advanced packaging | OSATs, advanced packaging lines | Developed by 1H 2026; demand still limited | Capital sale |
| Electroplating systems | Copper and bump plating for interconnect and packaging | Logic, foundry, packaging | Ongoing | Capital sale plus service |
| Dry vacuum pumps | Oil-free vacuum pumps installed beneath process chambers; large installed base | All fabs | Ongoing | Unit sale plus overhaul contracts |
| EVIS integrated dry vacuum pump system | Integrated system combining dry vacuum pumps with ancillary functions | Advanced fabs | Launched by 1H 2026 | Unit sale |
| Exhaust-gas abatement systems | Combustion and wet-type treatment of process exhaust (PFCs, toxic and flammable gases) | All fabs; central to the process exhaust and abatement market | Ongoing | Unit sale plus service |
| "LA+" exhaust treatment unit | Abatement unit with 50% lower height for space-constrained sub-fabs | Advanced fabs | Launched by 1H 2026 | Unit sale |
| Cryogenic chiller (RJ-TTC) | Chiller for cryogenic etch cooling down to -60°C (versus a conventional -30°C), with 30–50% lower power and water consumption; EBARA describes it as the first in this temperature range | Etch process lines (memory and logic) | 2026 market entry | Unit sale |
| Precision chillers, ozonized water generators | Temperature-control and process-support equipment | Fabs | Ongoing | Unit sale |
| Service & Support | Dry-pump overhaul (new sites in Taiwan and Korea in 2026), CMP parts, retrofit, field service | Installed base | Expanding | Recurring |
Energy (Ebara Elliott Energy)
| Product line | Description | Target customer | Recent development | Pricing model |
|---|---|---|---|---|
| Centrifugal and axial compressors | Process compressors for LNG, ethylene, refining, fertilizer, including e-LNG (electric-drive) trains | LNG and petrochemical owners, EPCs | e-LNG compressor demand captured in 2026 | Engineered-to-order |
| Steam turbines | Mechanical-drive and generator turbines | Petrochemicals, power | Integrated orders with compressors and pumps (e.g., the AMIRAL petrochemical project in the Middle East) | Engineered-to-order |
| High-temperature steam compressor | Adiabatic compression of SMR-generated steam to process temperatures of 500°C and above | Petrochemical plants | NuScale partnership (March 2026); compressor targeted for completion in 2027 | Development programme |
| Power-recovery expanders | Energy recovery in refining (e.g., FCC units) | Refiners | Ongoing | Engineered-to-order |
| Custom (API) pumps | Engineered pumps for oil, gas and power | Refiners, power plants | Ongoing | Engineered-to-order |
| Cryogenic LNG pumps and expanders (Cryodynamics brand) | Submerged-motor pumps and expanders for LNG liquefaction, storage and carriers | LNG terminals, shipyards | Ongoing | Engineered-to-order plus service |
| Liquid-hydrogen booster pump | Described by EBARA as the world's first LH2 booster pump; validated with real LH2 at -253°C | Hydrogen supply chain, power generation | Order received in March 2026 for a booster pump and cryogenic hydrogen return-gas blower set | Engineered-to-order |
| LH2 carrier cargo pumps | Shipboard cargo pumps for liquefied-hydrogen carriers | Shipowners, shipyards | World-first type approval (July 2026) | Engineered-to-order |
| Service & Support | 29 service centres, including new or expanded hubs in Houston and Abu Dhabi | Installed base | Abu Dhabi base starting operations in FY2026 | Recurring |
Building Service & Industrial
| Product line | Description | Target customer | Recent development |
|---|---|---|---|
| Standard pumps (land-based) | End-suction, multistage and in-line pumps for water supply, HVAC and industry | Contractors, OEMs, distributors | Ongoing |
| Submersible pumps (incl. Model DKE) | Wastewater and drainage pumps; the DKE anti-clog high-efficiency pump launched outside Japan (50 Hz regions) in August 2025 | Building services, municipalities | 2025 launch |
| Water-supply booster units | Packaged pump units for buildings | Building owners | Ongoing |
| Refrigeration machinery | Turbo chillers (incl. low-GWP refrigerant models and heat pumps), absorption chiller/heaters incl. a hydrogen-gas-driven model | Data centres, hospitals, factories | Hydrogen absorption chiller showcased; data-centre demand rising |
| Cooling towers | Cooling towers for HVAC and process | Buildings, industry | Ongoing |
| Blowers and fans | Industrial and building ventilation | Industry, buildings | Ongoing |
| Machine-tool coolant pumps (Spandau Pumpen) | Screw-type and seal-less coolant pumps | Machine-tool OEMs | Production transferred to Italy |
| Heavy-duty process pumps and mixers (Hayward Gordon) | Slurry, process and mixing equipment | Mining, water, industry (North America) | Ongoing |
| Fire-fighting and agricultural pump units (Germek) | Customized packaged pump units | Brazil and South America | Acquired March 2026 |
| Three-phase and IPM motors | High-efficiency industrial motors compliant with Japan's Top Runner and global standards | Machinery OEMs | Mitsubishi Electric business transfer targeted during 2026 |
Infrastructure
| Product line | Description | Target customer |
|---|---|---|
| Large drainage and flood-control pumps | Pump stations for flood mitigation | National and local governments (Japan, Southeast Asia, Middle East) |
| Water supply and sewerage pumps | Treatment plants and pumping stations | Water utilities |
| Agricultural irrigation pumps | Irrigation and land improvement | Agriculture ministries and cooperatives |
| Tunnel ventilation fans | Jet fans and ventilation for road tunnels | Road authorities |
| Lifecycle maintenance | Inspection, repair and refurbishment | Owners of ageing public assets |
Environmental Solutions
| Product line | Description | Target customer |
|---|---|---|
| Municipal solid-waste incineration plants | Waste-to-energy plants, new-build and life-extension | Municipalities |
| Industrial waste incineration | Plants for industrial waste processors | Industrial customers |
| EPC + long-term O&M | Design, build and multi-decade operation, e.g., a large EPC+O&M award in 1Q 2026 | Municipalities |
| Life-extension and upgrade work | Upgrading ageing facilities | Municipalities |
New businesses and technology programmes
Hydrogen: LH2 pumps, return-gas blowers, cargo pumps and hydrogen absorption chillers, with revenue targets of ¥30 billion by 2030 and more than ¥200 billion by 2040.
Space: prototype pump for a two-phase-flow heat dissipation system for satellites, under a JAXA contract signed in October 2025.
Digital: the EBARA-D3 manufacturing DX platform (July 2025), a knowledge-driven DX project that uses AI to capture shop-floor know-how (March 2026), and an internal generative-AI platform built on Google Cloud.
Financial Narrative
All figures are IFRS, consolidated, for fiscal years ending 31 December, in ¥ million unless stated, from the annual securities reports and earnings releases (kessan tanshin). Per-share figures are restated for the July 2024 five-for-one split.
Income statement
Orders for FY2021–FY2022 were reported on the former three-segment basis and are left out of the comparable series (shown as 0). Operating expenses are derived as gross profit minus operating profit.
Revenue CAGR: 12.3% over FY2021–FY2025 (four years) and 12.1% over FY2022–FY2025, against the E-Plan 2025 target of at least 7%.
Commentary. EBARA has compounded revenue at double-digit rates for five consecutive years and set records in orders, revenue and operating profit every year from FY2021 to FY2025. Three drivers stand out.
Semiconductor recovery and mix: Precision Machinery revenue grew from ¥192.8 billion in FY2021 to ¥342.3 billion in FY2025. The business returned 18.0% margins in FY2024 and 16.9% in FY2025.
The Energy upcycle in 2023–2024: Revenue rose 25.8% in FY2024 on LNG and petrochemical projects and high service intensity.
- Price realization and the post-pandemic recovery in industrial and building markets.
Gross margin expanded 3.0 points between FY2021 and FY2025 (29.6% to 32.6%). The FY2025 dip versus FY2024 reflects mix and rising fixed costs.
Operating-margin expansion has been steady rather than dramatic: 10.2% to 11.9% over four years, short of the gross-margin gain because SG&A grew with headcount (up 2,776 people, or 15%, between FY2021 and FY2025), IT/ERP investment and new overseas bases.
Net-profit growth slowed to 7.3% in FY2025. A higher effective tax rate (28.3% against 25.4%) and a smaller equity-method contribution (¥1.1 billion against ¥2.2 billion) absorbed part of the 16.2% operating-profit growth. Profit for the year including non-controlling interests was ¥79.6 billion in FY2025 (FY2024: ¥74.5 billion).
Balance sheet
The company does not report goodwill, intangibles or PP&E separately at the half-year in the presentation set; those 1H FY2026 cells are left at 0. Interest-bearing debt for FY2023–FY2025 is the company-defined measure from the results presentations; the short-term and long-term split of borrowings in the FY2025 annual securities report shows short-term borrowings of ¥1.1 billion, a current portion of long-term debt of ¥39.9 billion and non-current long-term debt of ¥51.3 billion, with the balance of the company-defined total consisting mainly of bonds and lease liabilities.
Commentary. The balance sheet stayed conservative through FY2024. The group was net cash at the end of FY2023 and FY2024, with D/E at 0.32–0.35. FY2025 marked a deliberate shift. Operating cash flow fell to ¥40.8 billion as trade receivables rose (to ¥332.4 billion, against ¥287.9 billion) on record fourth-quarter shipments. Over the same year, EBARA spent ¥92.2 billion on capex, ¥27.7 billion on dividends and ¥20.1 billion on buybacks. Interest-bearing debt rose by about ¥74 billion, the group moved to a modest net-debt position (about 0.55x EBITDA), and D/E reached 0.44. That is inside the E-Plan 2028 guideline of 0.4–0.5, so management regards it as the intended steady state, not a strain. Goodwill is small (2% of equity) after the FY2024 Vansan impairment, which limits impairment risk from past M&A.
Cash flow
Commentary. Cash generation is lumpy because large projects and semiconductor shipments swing working capital. FY2022 and FY2025 were weak operating-cash years (receivables and inventory build), and FY2021 and FY2024 were strong. The step-up in capex from ¥40.6 billion (FY2023) to ¥100.7 billion (FY2025) reflects:
-
capacity for Precision Machinery: the Kumamoto K3 plant completed in December 2024, and further line additions
-
the Futtsu liquid-hydrogen complex (about ¥16 billion for E-HYETEC alone)
-
new service bases in Houston and Abu Dhabi
-
corporate investment in IT and ERP and in facilities
The company expects FY2026 operating cash flow of about ¥100 billion and free cash flow (OCF plus investing CF) of about ¥45 billion. In 1H FY2026, operating cash flow was ¥75.4 billion and free cash flow ¥30.7 billion, so the forecast inflection is under way.
Returns, liquidity and efficiency
Working-capital days use company-reported trade receivables, inventories and trade payables against revenue and cost of sales.
Interest coverage. Net finance costs are immaterial relative to operating earnings. Profit before tax stayed within 3% of operating profit in every year from FY2021 to FY2025, and in FY2024 it exceeded operating profit. Operating profit therefore covers net financial costs many times over. The FY2026 forecast includes about ¥3.4 billion of financial income and a ¥17.2 billion gain on the Swing Corporation stake sale.
Commentary. EBARA has held ROE at or above its 15% target for four consecutive years and ROIC above its 10% target in each year of E-Plan 2025. Returns are capped by a structurally long cash conversion cycle of about 160 days, a function of long-lead engineered equipment, progress-billing project accounting and semiconductor customers' payment terms. The rise to 167.5 days in FY2025 came from lower payables and higher receivables. Payables days fell from 108 to 71 over two years as EBARA paid suppliers faster amid supply-chain tightness, which absorbed cash. E-Plan 2028 raises the ROIC target to at least 13.0% (with segment hurdles up to 25.0% for Precision Machinery) and the ROE target to at least 18.0%. On management's FY2026 forecast, ROE rises to 18.8%, helped by the one-off Swing gain, while ROIC dips to 11.8%.
First-half FY2026 consolidated results
The first-half operating-profit bridge was ¥50.0 billion (1H FY2025), plus ¥10.7 billion from higher revenue, plus ¥10.2 billion from profitability, minus ¥23.8 billion from higher fixed costs, plus ¥2.8 billion from FX and plus ¥0.9 billion from other items, giving ¥50.6 billion (1H FY2026). The fixed-cost increase reflects capacity expansion, staffing and IT spending in support of the E-Plan 2028 growth phase. Average rates were ¥159.30/USD and ¥185.30/EUR, against ¥148.57 and ¥162.12 a year earlier.
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansFinancial Detail
Segment revenue (JPY Bn)
| Segment revenue (JPY Bn) | FY2023 | FY2024 | FY2025 |
|---|---|---|---|
Precision Machinery | 246.9 | 278.4 | 342.3 |
Building Service & Industrial | 222.1 | 238.2 | 241.9 |
Energy | 167.2 | 210.4 | 217.8 |
Environmental Solutions | 71.5 | 87.4 | 97.9 |
Infrastructure | 50.1 | 51.1 | 57.1 |
Other | 1.5 | 1.1 | 1.2 |
Consolidated | 759.3 | 866.7 | 958.3 |
Segment revenue growth (%)
| Segment revenue growth (%) | FY2024 | FY2025 |
|---|---|---|
Precision Machinery | 12.7 | 23.0 |
Building Service & Industrial | 7.2 | 1.6 |
Energy | 25.8 | 3.5 |
Environmental Solutions | 22.2 | 11.9 |
Infrastructure | 1.9 | 11.8 |
Consolidated | 14.1 | 10.6 |
Segment operating profit (JPY Bn)
| Segment operating profit (JPY Bn) | FY2023 | FY2024 | FY2025 |
|---|---|---|---|
Precision Machinery | 38.2 | 50.1 | 57.8 |
Energy | 22.3 | 28.0 | 25.9 |
Building Service & Industrial | 15.7 | 10.3 | 15.3 |
Environmental Solutions | 6.9 | 8.4 | 13.0 |
Infrastructure | 4.6 | 3.7 | 4.7 |
Other and adjustments | -1.7 | -2.7 | -2.9 |
Consolidated | 86.0 | 98.0 | 113.8 |
Segment operating margin (%)
| Segment operating margin (%) | FY2023 | FY2024 | FY2025 |
|---|---|---|---|
Precision Machinery | 15.5 | 18.0 | 16.9 |
Energy | 13.4 | 13.3 | 11.9 |
Building Service & Industrial | 7.1 | 4.3 | 6.3 |
Environmental Solutions | 9.7 | 9.7 | 13.3 |
Infrastructure | 9.2 | 7.2 | 8.2 |
Consolidated | 11.3 | 11.3 | 11.9 |
Segment Overview
| Segment | Share of revenue | Share of reportable-segment profit |
|---|---|---|
Precision Machinery | 35.7 | 49.5 |
Building Service & Industrial | 25.2 | 13.1 |
Energy | 22.7 | 22.2 |
Environmental Solutions | 10.2 | 11.1 |
Infrastructure | 6.0 | 4.0 |
Revenue by Segment
| Segment orders (JPY Bn) | FY2023 | FY2024 | FY2025 |
|---|---|---|---|
Precision Machinery | 217.7 | 260.0 | 303.4 |
Building Service & Industrial | 221.3 | 244.4 | 249.2 |
Energy | 222.7 | 222.7 | 194.7 |
Environmental Solutions | 100.8 | 71.5 | 135.3 |
Infrastructure | 56.6 | 60.5 | 62.9 |
Consolidated | 820.5 | 860.5 | 949.7 |
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansRevenue by Segment (FY2023 end–1H FY2026 end)
| Backlog (JPY Bn) | FY2023 end | FY2024 end | 1H FY2026 end |
|---|---|---|---|
Environmental Solutions | 346.9 | 344.4 | 416.7 |
Energy | 210.1 | 239.0 | 236.3 |
Precision Machinery | 205.4 | 187.9 | 233.5 |
Building Service & Industrial | 60.6 | 68.7 | 95.5 |
Infrastructure | 67.4 | 76.9 | 76.9 |
Consolidated | 890.7 | 917.1 | 1,059.2 |
Segment Overview — Precision Machinery
| Segment | Orders 1H25 | Orders 1H26 | Revenue 1H25 | Revenue 1H26 | OP 1H25 | OP 1H26 | OP margin 1H26 (%) |
|---|---|---|---|---|---|---|---|
Precision Machinery | 141.3 | 267.4 | 150.5 | 183.6 | 23.4 | 32.5 | 17.7 |
Energy | 86.9 | 112.5 | 109.0 | 96.7 | 11.1 | -0.7 | -0.8 |
Building Service & Industrial | 125.5 | 148.4 | 113.8 | 129.5 | 6.8 | 8.3 | 6.4 |
Infrastructure | 31.1 | 26.3 | 32.6 | 32.1 | 5.6 | 5.6 | 17.4 |
Environmental Solutions | 65.8 | 80.8 | 42.0 | 47.9 | 4.4 | 6.6 | 14.0 |
Consolidated | 451.3 | 636.2 | 448.7 | 490.7 | 50.0 | 50.6 | 10.3 |
Income statement (JPY Mn)
| Income statement (JPY Mn) | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
Orders received | 0 | 0 | 820,500 | 860,500 | 949,683 |
Revenue | 603,213 | 680,870 | 759,328 | 866,668 | 958,285 |
Cost of sales | 424,571 | 469,694 | 516,618 | 579,699 | 646,341 |
Gross profit | 178,641 | 211,175 | 242,709 | 286,969 | 311,944 |
SG&A and other operating expenses, net | 117,269 | 140,603 | 156,684 | 189,016 | 198,142 |
Operating profit | 61,372 | 70,572 | 86,025 | 97,953 | 113,802 |
Depreciation and amortization | 21,435 | 24,068 | 26,590 | 30,011 | 34,804 |
EBITDA (operating profit plus D&A) | 82,807 | 94,640 | 112,615 | 127,964 | 148,606 |
Profit before tax | 60,302 | 69,481 | 84,733 | 99,852 | 110,977 |
Income tax expense | 13,873 | 16,775 | 20,933 | 25,361 | 31,384 |
Profit attributable to owners of parent | 43,616 | 50,488 | 60,283 | 71,401 | 76,633 |
Per share (JPY, split-adjusted)
| Per share (JPY, split-adjusted) | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
Basic EPS | 92.69 | 109.72 | 130.73 | 154.62 | 166.31 |
Diluted EPS | 92.42 | 109.47 | 130.51 | 154.43 | 166.15 |
Dividend per share | 32.6 | 38.6 | 45.8 | 55.0 | 59.0 |
Book value per share | 679.10 | 782.01 | 887.92 | 1,024.60 | 1,114.52 |
Dividend payout ratio (%) | 35.2 | 35.2 | 35.0 | 35.6 | 35.5 |
Margins (%)
| Margins (%) | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
Gross margin | 29.6 | 31.0 | 32.0 | 33.1 | 32.6 |
Operating margin | 10.2 | 10.4 | 11.3 | 11.3 | 11.9 |
EBITDA margin | 13.7 | 13.9 | 14.8 | 14.8 | 15.5 |
Net margin (owners) | 7.2 | 7.4 | 7.9 | 8.2 | 8.0 |
Effective tax rate | 23.0 | 24.1 | 24.7 | 25.4 | 28.3 |
Growth (%)
| Growth (%) | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
Revenue growth | 15.5 | 12.9 | 11.5 | 14.1 | 10.6 |
Operating profit growth | 63.4 | 15.0 | 21.9 | 13.9 | 16.2 |
Net profit growth | 80.0 | 15.8 | 19.4 | 18.4 | 7.3 |
Balance Sheet and Margin Analysis (%)
| Balance sheet (JPY Mn) | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
Total assets | 719,736 | 828,049 | 913,900 | 1,005,085 | 1,082,201 |
Cash and cash equivalents | 136,488 | 116,137 | 148,059 | 171,031 | 143,485 |
Total current assets | 499,934 | 580,694 | 648,323 | 705,309 | 717,392 |
Inventories | 121,389 | 181,337 | 200,616 | 205,960 | 197,695 |
Total current liabilities | 327,357 | 369,078 | 361,966 | 405,340 | 448,343 |
Working capital | 172,577 | 211,616 | 286,357 | 299,969 | 269,049 |
Total liabilities | 398,081 | 458,324 | 492,328 | 519,749 | 560,535 |
Equity attributable to owners | 312,310 | 359,966 | 409,875 | 473,277 | 508,875 |
Total equity | 321,655 | 369,725 | 421,572 | 485,336 | 521,666 |
Retained earnings | 171,720 | 184,995 | 224,267 | 272,382 | 319,262 |
Equity ratio (owners, %) | 43.4 | 43.5 | 44.8 | 47.1 | 47.0 |
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansDebt and intangibles (JPY Bn)
| Debt and intangibles (JPY Bn) | FY2023 | FY2024 | FY2025 | 1H FY2026 |
|---|---|---|---|---|
Interest-bearing debt | 145.2 | 150.4 | 224.7 | 228.2 |
Cash and cash equivalents | 148.0 | 171.0 | 143.4 | 153.0 |
Net debt (negative = net cash) | -2.8 | -20.6 | 81.3 | 75.2 |
Debt-to-equity ratio (x) | 0.35 | 0.32 | 0.44 | 0.43 |
Goodwill | 15.5 | 10.1 | 10.3 | 0 |
Intangible assets | 50.4 | 53.8 | 61.5 | 0 |
Property, plant and equipment | 175.9 | 202.0 | 258.0 | 0 |
Cash flow (JPY Mn)
| Cash flow (JPY Mn) | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
Operating cash flow | 72,858 | 37,070 | 70,012 | 100,940 | 40,755 |
Capital expenditure, cash basis | -25,755 | -24,347 | -34,467 | -50,892 | -92,214 |
Free cash flow (OCF minus capex) | 47,103 | 12,723 | 35,545 | 50,048 | -51,459 |
Investing cash flow | -31,361 | -38,324 | -35,625 | -48,554 | -91,232 |
Financing cash flow | -29,489 | -23,749 | -4,658 | -31,915 | 16,836 |
Dividends paid | -10,455 | -18,216 | -18,943 | -22,763 | -27,718 |
Share buybacks | -20,099 | -8 | -11 | -17 | -20,077 |
Capex, depreciation and R&D, accrual basis (JPY Bn)
| Capex, depreciation and R&D, accrual basis (JPY Bn) | FY2023 | FY2024 | FY2025 | FY2026 plan |
|---|---|---|---|---|
Capital expenditure | 40.6 | 58.6 | 100.7 | 99.0 |
Depreciation | 26.5 | 30.0 | 34.8 | 42.0 |
R&D expenses | 18.2 | 20.5 | 23.2 | 25.0 |
FY2025 capex by segment (JPY Bn) | Capex | Depreciation | R&D | — |
Precision Machinery | 34.0 | 9.9 | 12.0 | — |
Building Service & Industrial | 15.0 | 7.5 | 5.5 | — |
Energy | 14.5 | 5.5 | 2.6 | — |
Environmental Solutions | 2.1 | 1.2 | 2.2 | — |
Infrastructure | 1.5 | 1.4 | 0.7 | — |
Corporate and other | 33.3 | 9.0 | 0.2 | — |
Returns & Leverage Ratios (%) and Financial Ratios (x)
| Ratios | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
ROE (%) | 14.5 | 15.0 | 15.7 | 16.2 | 15.6 |
ROA, net profit to average assets (%) | 6.4 | 6.5 | 6.9 | 7.4 | 7.3 |
Pre-tax return on total assets (%) | 8.8 | 9.0 | 9.7 | 10.4 | 10.6 |
Current ratio (x) | 1.53 | 1.57 | 1.79 | 1.74 | 1.60 |
Asset turnover (x) | 0.88 | 0.88 | 0.87 | 0.90 | 0.92 |
ROIC (%)
| ROIC (%) | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|
ROIC, company definition | 11.6 | 12.2 | 12.2 | 11.9 |
Working Capital (Days)
| Working-capital cycle (days) | FY2023 | FY2024 | FY2025 |
|---|---|---|---|
Days sales outstanding | 126.5 | 121.2 | 126.6 |
Days inventory outstanding | 141.7 | 129.6 | 111.6 |
Days payables outstanding | 108.2 | 91.2 | 70.7 |
Cash conversion cycle | 160.0 | 159.6 | 167.5 |
Income Statement and Per-Share Data
| 1H consolidated (JPY Bn) | 1H FY2025 | 1H FY2026 |
|---|---|---|
Orders | 451.3 | 636.2 |
Revenue | 448.7 | 490.7 |
Operating profit | 50.0 | 50.6 |
Profit attributable to owners | 31.3 | 33.5 |
Basic EPS (JPY) | 67.84 | 73.54 |
Operating margin (%) | 11.2 | 10.3 |
Revenue by region (JPY Bn)
| Revenue by region (JPY Bn) | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|---|
Japan | 247.5 | 253.8 | 271.3 | 290.7 | 320.3 |
China | 111.4 | 110.3 | 131.9 | 190.2 | 181.1 |
Other Asia (incl. Taiwan and Korea) | 121.7 | 137.2 | 139.7 | 129.2 | 193.5 |
North America | 44.2 | 57.7 | 80.9 | 123.7 | 116.6 |
Other regions (Europe, Middle East and others) | 78.4 | 121.9 | 135.5 | 132.9 | 146.5 |
Total | 603.2 | 680.9 | 759.3 | 866.7 | 958.0 |
Regional growth (%)
| Regional growth (%) | FY2022 | FY2023 | FY2024 | FY2025 |
|---|---|---|---|---|
Japan | 2.6 | 6.9 | 7.1 | 10.2 |
China | -1.0 | 19.6 | 44.2 | -4.8 |
Other Asia | 12.7 | 1.8 | -7.5 | 49.8 |
North America | 30.5 | 40.2 | 52.9 | -5.7 |
Other regions | 55.5 | 11.2 | -1.9 | 10.2 |
Region Overview
| Region | Precision Machinery | Energy | Building Service & Industrial | Infrastructure | Environmental Solutions |
|---|---|---|---|---|---|
Japan | 62.6 | 8.5 | 104.9 | 46.8 | 96.1 |
Asia excluding Japan (incl. China) | 226.8 | 79.7 | 58.7 | 7.6 | 1.7 |
North America | 37.7 | 58.9 | 18.2 | 1.6 | 0 |
Europe | 13.8 | 17.8 | 26.2 | 0 | 0 |
Middle East | 0 | 40.8 | 9.6 | 1.0 | 0 |
Other | 0 | 11.7 | 23.9 | 0 | 0 |
Segment total | 342.2 | 217.8 | 241.9 | 57.1 | 97.8 |
Geographic Revenue
| Region | 1H FY2025 | 1H FY2026 | Change (%) |
|---|---|---|---|
Japan | 152.9 | 167.9 | 9.8 |
Taiwan and Korea | 85.6 | 124.9 | 45.8 |
China | 75.9 | 73.8 | -2.7 |
North America | 63.0 | 52.8 | -16.2 |
Europe | 27.6 | 32.7 | 18.4 |
Middle East | 26.9 | 19.9 | -26.0 |
Other | 16.5 | 18.4 | 11.3 |
Capital Markets
| Measure | Value |
|---|---|
Latest close (30 October 2026) | ¥3,752 |
All-time high | ¥6,890 (19 June 2026) |
52-week low | ¥3,538 |
Close on 14 August 2026 (before 1H results reaction) | ¥5,906 |
Approximate 1-year change (from about ¥4,100 at end-October 2025) | About −9% |
Approximate 3-year change (from about ¥1,290 in late October 2023) | About +190% |
Approximate 5-year change (from about ¥1,070 in early October 2021) | About +250% |
Valuation Snapshot
| Multiple | Value | Basis |
|---|---|---|
P/E (FY2026E) | 17.2x | Company EPS forecast of ¥217.93, which includes the one-off Swing gain |
P/E (FY2026E, excluding the after-tax Swing gain, approximate) | About 20x | Gain of ¥17.2 billion removed from net profit |
P/B | 3.2x | BPS of about ¥1,166 (June 2026) |
EV/EBITDA (FY2026E) | About 10.8x | EV of about ¥1.80 trillion; EBITDA of ¥167 billion (OP ¥125.0 billion plus D&A ¥42.0 billion) |
EV/Sales (FY2026E) | About 1.7x | Revenue forecast of ¥1,053 billion |
Dividend yield | 1.76% | FY2026 DPS plan of ¥66 |
Capital Markets — Rating distribution
| Item | Detail |
|---|---|
Rating distribution (MINKABU, 25 September 2026) | 11 analysts: 6 Strong Buy, 2 Buy, 3 Neutral |
Average target price | ¥6,316 (MINKABU, 25 September 2026); ¥6,425 (IFIS consensus, 9 October 2026) |
Selected broker views | Goldman Sachs: Buy, ¥7,900 target (18 October 2026); Nomura: Buy, ¥6,300 target (late September / early October 2026) |
FY2026 consensus (IFIS, 18 September 2026) | Revenue ¥1,072.2 billion; OP ¥131.9 billion; pre-tax profit ¥140.3 billion; net profit ¥99.1 billion |
Dividend (JPY per share, split-adjusted)
| Dividend (JPY per share, split-adjusted) | FY2021 | FY2022 | FY2023 | FY2024 | FY2025 | FY2026E |
|---|---|---|---|---|---|---|
Annual dividend | 32.6 | 38.6 | 45.8 | 55.0 | 59.0 | 66.0 |
Capital Programmes
| Program | Authorized | Executed |
|---|---|---|
| 2,021 | Repurchase and cancellation | ¥20.1 billion (cash flow basis) |
August 2025 resolution | Up to ¥20 billion / 9.09 million shares (20 August – 23 December 2025) | 5,470,800 shares, ¥19,999 million |
February 2026 resolution | Up to ¥10 billion / 3.0 million shares (through 31 December 2026) | 1,781,500 shares, ¥9,999.5 million (completed 31 July 2026) |
Capital Instruments
| Instrument | Amount | Coupon | Tenor | Maturity |
|---|---|---|---|---|
12th unsecured bond | ¥15.0 billion | 0.435% | 5 years | 2027 |
13th unsecured bond (sustainability-linked) | ¥10.0 billion | 1.468% | 10 years | September 2034 |
Current portion of long-term debt (FY2025 end) | ¥39.9 billion | — | — | Within 12 months |
Non-current long-term debt (FY2025 end) | ¥51.3 billion | — | — | Beyond 12 months |
Analyst Conclusions
Management guidance
For FY2026, management guides to orders of ¥1,245 billion (+31.1%), revenue of ¥1,053 billion (+9.9%), operating profit of ¥125.0 billion (+9.8%) and profit attributable to owners of ¥99.5 billion (+29.8%, including the Swing gain). Both orders and revenue would exceed ¥1 trillion for the first time, and all profit lines would set records for a sixth consecutive year.
Hitting the guidance requires a heavy second half: operating profit of about ¥74.4 billion in 2H, against ¥50.6 billion in 1H. That relies on Precision Machinery (¥77.0 billion FY OP, against ¥32.5 billion in 1H) and on Energy recovering from its first-half loss to ¥18.0 billion for the year.
The CEO has said that orders are running ahead of plan but that lead times exceed one year for some products, so it remains unclear whether the FY2028 target of about ¥1.2 trillion in revenue can be pulled forward.
Consensus growth expectations
The IFIS consensus for FY2026 (revenue ¥1,072 billion, OP ¥131.9 billion) sits slightly above guidance. Longer-range sell-side projections circulating in 2026 point to EPS of about ¥252 in FY2027 and about ¥305 in FY2028, implying low-to-mid-teens earnings growth beyond the FY2026 one-off gain.
Bull case
-
Order momentum converts to margin. Precision Machinery orders of ¥550 billion planned for FY2026 (+81%) against revenue of ¥425 billion would carry a growing backlog into FY2027. If mix and utilization lift segment margins toward the 20%-plus target, group operating profit could beat consensus by a wide margin.
-
Energy normalizes. The Jeannette problems are identified and fixable. A recovery from the 1H loss to the 13.3% margin of FY2024, along with e-LNG and hydrogen demand, would restore about ¥10 billion of profit.
-
Valuation reset. At about 17x headline and about 20x underlying FY2026 earnings and about 3.2x book, roughly 40% below the June 2026 peak, the shares price in much of the cyclical risk. Average analyst targets of ¥6,300–¥6,400 imply about 70% upside.
Bear case
-
Orders without operating leverage. In 1H FY2026, orders grew 41% but operating profit only 1.2% as fixed costs rose ¥23.8 billion. If capacity costs keep running ahead of revenue, the 14.5% margin target for FY2028 slips.
-
Semiconductor cyclicality and China. Any pause in AI or memory capex, or tighter export controls, would hit a segment that produces half of group profit, and the stock has shown limit-down sensitivity to order revisions.
-
Quality of earnings and cash. The FY2026 net-profit jump relies on a ¥17.2 billion one-off gain, FY2025 free cash flow was −¥51.5 billion, and the cash conversion cycle lengthened to about 168 days.
Key catalysts (next 12 months)
| Timing | Catalyst | What to watch |
|---|---|---|
| Mid-November 2026 | 3Q FY2026 results | Third-quarter Precision Machinery orders; Energy recovery; reaffirmation of the ¥125 billion OP guidance |
| December 2026 | SEMI year-end equipment forecast | WFE outlook for 2027 |
| During 2026 – early 2027 | Closing of the Mitsubishi Electric motor business transfer | Integration costs and synergy targets |
| February 2027 | FY2026 results and FY2027 guidance | First E-Plan 2028 progress check; dividend and buyback decisions |
| March 2027 | 162nd AGM | Board composition; remuneration linked to E-Plan 2028 |
| 2,027 | NuScale steam compressor completion target | Commercial pathway for SMR process heat |
| Ongoing | Hydrogen orders through E-HYETEC | Conversion of test capability into orders |
| Ongoing | Middle East and tariff developments | Energy service revenue; logistics costs |
Mid-November 2026: Catalyst: 3Q FY2026 results; What to watch: Third-quarter Precision Machinery orders; Energy recovery; reaffirmation of the ¥125 billion OP guidance
December 2026: Catalyst: SEMI year-end equipment forecast; What to watch: WFE outlook for 2027
During 2026 – early 2027: Catalyst: Closing of the Mitsubishi Electric motor business transfer; What to watch: Integration costs and synergy targets
February 2027: Catalyst: FY2026 results and FY2027 guidance; What to watch: First E-Plan 2028 progress check; dividend and buyback decisions
March 2027: Catalyst: 162nd AGM; What to watch: Board composition; remuneration linked to E-Plan 2028
2027: Catalyst: NuScale steam compressor completion target; What to watch: Commercial pathway for SMR process heat
Ongoing: Catalyst: Hydrogen orders through E-HYETEC; What to watch: Conversion of test capability into orders
Ongoing: Catalyst: Middle East and tariff developments; What to watch: Energy service revenue; logistics costs
Monitorables
-
Precision Machinery orders compared with revenue (book-to-bill), and the mix between memory and non-memory.
-
Fixed-cost growth compared with gross-profit growth.
-
Energy segment margin and the remediation at Jeannette.
-
Cash conversion cycle and quarterly operating cash flow.
-
Building Service & Industrial ROIC progress toward 8.5%.
-
Taiwan/Korea and China revenue trends.
-
D/E against the 0.4–0.5 guideline.
-
Hydrogen order intake.
Analyst verdict
EBARA has done what few Japanese machinery conglomerates manage: it turned a century-old pump maker into a credible semiconductor-equipment leader while hitting every consolidated target of its last medium-term plan. Five straight years of record results, revenue compounding at 12% a year, and a ROE held above 15% with an equity ratio near 47% show durable execution, not one cyclical upswing. The rotating-machinery and cryogenic base gives the group unusual optionality. The same technology serves AI fabs, LNG trains and the first liquid-hydrogen supply chains, and the October 2026 opening of the Futtsu hydrogen complex shows management investing ahead of those markets.
The debate now is about conversion, not demand. First-half 2026 showed the tension clearly. Orders jumped 41%, yet operating profit rose only 1.2% as capacity, staffing and IT costs ran ahead of shipments, and the Energy business stumbled on avoidable execution errors at its flagship US plant. Cash generation weakened in FY2025, leverage rose toward its new ceiling, and FY2026's headline profit growth depends partly on a one-off disposal gain. Investors who paid 28x earnings at the June peak have since lost more than 40%, a reminder that this stock still trades as a semiconductor cyclical.
On balance, the risk-reward has improved materially after the correction. At about 20x underlying forecast earnings, the shares discount little of the E-Plan 2028 margin uplift. Meanwhile a backlog above ¥1 trillion, a high service share and Japanese infrastructure and waste-plant franchises support the downside. The investment case hinges on two near-term proofs: Precision Machinery margins moving toward 18–20% as the order surge ships, and Energy returning to double-digit margins. If the third-quarter and FY2026 results show progress on both, EBARA's discount to its own historical multiples and to global semiconductor-equipment peers looks unjustified. If fixed costs keep outrunning revenue, the FY2028 targets of 14.5% margin and 18% ROE will lose credibility, and the shares are likely to stay range-bound despite record orders. The weight of evidence favours a constructive stance, conditional on conversion.
Unlock Company Financials
Unlock this company profile to view its financial data.
View Subscription PlansExecutive Leadership
Board of Directors
| Name | Position | Notes |
|---|---|---|
Hiroshi Oeda | Independent Director; Chairman of the Board; Member, Nomination Committee | Former Nisshin Seifun Group executive (joined Nisshin Flour Milling in 1980); EBARA Nomination Committee chair from 2019; Lead Independent Director from 2020; board chair since March 2022 |
Masao Asami | Director, Chairman of the Company; Member, Nomination Committee | Joined EBARA in April 1986; Executive Officer 2010; President and Representative Executive Officer March 2019 – March 2025; CEO & COO from January 2023; led the E-Plan 2022 and E-Plan 2025 turnaround |
Shugo Hosoda | Director; President, Representative Executive Officer, CEO & COO | Born 1 September 1966 (age 60); University of Tokyo, Faculty of Engineering (1990); joined EBARA October 1993; Governance Promotion head (2015); Vice President and Director, Elliott Group Holdings (2016–2019); Finance & Accounting head (2021); CFO (2023–2025); CEO since March 2025 |
Akihiko Nagamine | Director (non-executive) | Former Executive Officer in charge of Finance & Accounting (until 2021) |
Mie Fujimoto | Independent Outside Director | On the board since 2020 |
Takuya Shimamura | Independent Outside Director | Joined the board in March 2022 |
Teiji Koge | Independent Outside Director | — |
Tsuyoshi Numagami | Independent Outside Director | — |
Kaeko Kitamoto | Independent Outside Director | — |
Takayo Hasegawa | Independent Outside Director | — |
Executive Leadership Team
| Name | Title |
|---|---|
Shugo Hosoda | President and Representative Executive Officer, CEO & COO |
Isao Nambu | President, Precision Machinery Company; Division Executive, Equipment Division |
Seiichi Tsuyuki | Components Business; Safety, Environment and Quality; Division Executive, Components Division (Precision Machinery) |
Takanobu Miyaki | President, Energy Company |
Shu Nagata | President, Building Service & Industrial Company; Chairman, Ebara Pumps Europe S.p.A. (joined 1990; CHRO roles 2019–2020) |
Masayuki Kai | President, Infrastructure Company |
Teruyuki Ota | President, Environmental Solutions Company; Representative Director and Chairman, Ebara Environmental Plant Co., Ltd. (joined 1994) |
Tetsuya Fuchida | Executive Officer, CFO; Division Executive, Corporate Strategic Planning |
Akihiro Osaki | CHRO; Division Executive, Human Resources |
Toru Nakayama | CRO (Chief Risk Officer) |
Hiroyuki Kowase | CIO; Division Executive, Information and Communication Systems |
Norihisa Miyoshi | CTO; Division Executive, Technologies Management Strategy |
Kazunori Suda | Division Executive, New Business Development (ex-Toshiba and Nidec; joined 2020) |
Sungyong Lee | Division Executive, Management Strategy Control |
Miwa Tachiyama | Division Executive, Global Supply Chain Strategy |
Directors' Remuneration
| Individual | Fiscal year | Total consolidated remuneration (JPY Mn) |
|---|---|---|
Shugo Hosoda, President & CEO | FY2025 | 189 |
Masao Asami, then President & CEO | FY2024 | 165 |
Masao Asami, then President & CEO | FY2023 | 200 |
Major Shareholders
| Rank | Shareholder | Shares (thousand) | Holding (%) |
|---|---|---|---|
| 1 | The Master Trust Bank of Japan, Ltd. (trust account) | 77,966 | 17.08 |
| 2 | Custody Bank of Japan, Ltd. (trust account) | 34,828 | 7.63 |
| 3 | Ichigo Trust Pte. Ltd. | 23,765 | 5.20 |
| 4 | BNYM AS AGT/CLTS NON TREATY JASDEC | 11,024 | 2.41 |
| 5 | JPMorgan Securities Japan Co., Ltd. | 8,568 | 1.86 |
| 6 | State Street Bank and Trust Company | 7,008 | 1.54 |
| 7 | JPMorgan Chase Bank | 6,728 | 1.47 |
| 8 | BNYM AS AGT/CLTS 10 PERCENT | 6,208 | 1.36 |
| 9 | Japan Securities Finance Co., Ltd. | 5,170 | 1.13 |
| 10 | Nippon Life Insurance Company | 5,093 | 1.12 |
| — | Top-10 total | 186,358 | 40.80 |
Competitive Landscape
Competitors by Segment
| Segment | Competitor | Headquarters | Overlap with EBARA |
|---|---|---|---|
Precision Machinery | Applied Materials | USA | CMP systems (the global leader), electroplating |
Precision Machinery | Tokyo Seimitsu (ACCRETECH) | Japan | CMP systems |
Precision Machinery | Hwatsing Technology | China | CMP systems (Chinese domestic substitution) |
Precision Machinery | KCTech | Korea | CMP systems |
Precision Machinery | Atlas Copco (Edwards and other Vacuum Technique brands) | Sweden | Dry vacuum pumps, exhaust abatement |
Precision Machinery | Busch Group (incl. Pfeiffer Vacuum) | Germany | Vacuum pumps, abatement |
Precision Machinery | Kashiyama Industries | Japan | Dry vacuum pumps |
Precision Machinery | Lam Research, ACM Research | USA / USA-China | Electroplating systems |
Energy | Siemens Energy, Baker Hughes, MAN Energy Solutions, Mitsubishi Heavy Industries Compressor | Germany / USA / Germany / Japan | Process compressors and steam turbines |
Energy | Nikkiso (Cryogenic Industries), Sulzer, Flowserve | Japan / Switzerland / USA | Cryogenic and API custom pumps |
Building Service & Industrial | Grundfos, Xylem, Wilo, KSB | Denmark / USA / Germany / Germany | Standard and building-service pumps |
Building Service & Industrial | Tsurumi Manufacturing, Kawamoto Pump | Japan | Submersible and building pumps |
Building Service & Industrial | Daikin, Trane, Carrier, Johnson Controls | Japan / Ireland-USA / USA / Ireland-USA | Chillers and cooling |
Infrastructure | Kubota, Torishima Pump | Japan | Large public-sector pumps |
Environmental Solutions | Kanadevia (formerly Hitachi Zosen), JFE Engineering, Takuma, Nippon Steel Engineering, Mitsubishi Heavy Industries Environmental & Chemical Engineering | Japan | Waste-to-energy plants and O&M |
Peer Comparison FY2026
| Company | Latest fiscal year | Revenue | Revenue growth (%) | Profitability (reported basis) |
|---|---|---|---|---|
EBARA | FY Dec-2025 | ¥958.3 billion | 10.6 | Operating margin 11.9% |
Applied Materials | FY Oct-2025 | US$28.37 billion | 4 | GAAP operating margin 29.2% |
Atlas Copco | FY Dec-2025 | SEK 168.3 billion (Vacuum Technique SEK 36.7 billion) | -5 (organic -1) | Operating margin 20.3% (adjusted 20.7%); Vacuum Technique 18.4% |
Xylem | FY Dec-2025 | US$9.0 billion | 6 | Adjusted EBITDA margin about 22.2% |



